"Skyrim": codes for magic, skills and command execution. Skyrim All codes for the game Skyrim codes for skyrim potions

Using these cheat codes for Skyrim, you can quickly upgrade all your skills and get all the perks. To do this we will need the following cheats:

advskill N X- raise skill N by X experience units. The main team for leveling up all skills and perks.

player.setav N X- set X skill level N. This cheat does not add “ability points”, but is necessary when your skill level reaches 100.

player.setlevel N- set character level N (1-255). Can be used to lower a character's level after using the advskill cheat.

List of names of all skills for advskill and player.setav commands

Usage example:

advskill Destruction 100- raise “Destruction” by 100 experience (not levels)

player.setav Block 50- set level 50 of the “Block” skill

1. Alchemy - alchemy
2. Alteration - change
3. Conjuration - witchcraft
4. Destruction - destruction
5. Enchanting - enchantment
6. Illusion - Illusion
7. Restoration - restoration
8. Marksman - shooting
9. Block - block
10. HeavyArmor - heavy armor
11. LightArmor - light armor
12. Lockpicking - hack
13. Onehanded - one-handed weapon
14. Twohanded - two-handed weapon
15. Pickpocket - pick pocketing
16. Smithing - blacksmithing.
17. Sneak - stealth
18. Speechcraft - eloquence

To upgrade all the perks of all skills, do the following:

Using the advskill cheat (description above) we raise any skill to level 100.

Then we use the code player.setav [skill name] 0 (without brackets) - set the level of the specified skill to 0.

Repeat points 1 and 2 until you have upgraded all the perks.

If after this you still don’t understand how to add “ability points” to level up perks, then enter this several times (one at a time):

advskill Destruction 999999

player.setav Destruction 0

After these manipulations, you will receive the required number of “ability points” and can spend them on upgrading all the perks available in Skyrim.

Quickly upgrade all perks in Skyrim and raise all skills to 100

place the contents of the archive (2 text files) in the main game folder (not Data)

start the game

open consoles

1. enter bat allskills- upgrade all skills to 100
2. enter bat allperks- unlock all perks in Skyrim

Attention! When you enter bat allskills, further upgrades of your GG will no longer be available, which will affect the gameplay! I recommend entering bat allperks, and allskills at the end or at the end of the game (if you are not going to level up further)

To level up your main character, enter:

player.setlevel 50- set the main character's level to 50.

Instead of 50, you can enter any number.

To change the amount of magic, lives and stamina, use the following cheats:

1. player.setav Health X- set max. number of lives in X units
2. player.setav Magicka X- set max. amount of magic in X units
3. player.setav Stamina X- set max. quantity of stock in X units.

To activate cheats, you need to open the console by pressing the [~] (tilde) key and enter the codes from the list below:

tgm- invulnerability mode

tcl- walk through walls

tmm 1- open the world map (all points on the map)

killall- kill everyone (friends/enemies) in sight

psb- get all spells, dragon shouts and talents

qqq- exit the game

advlevel- raise the level. Doesn't add ability points

tfc- “free” camera mode

tdetect- theft without consequences. Disable NPC's vision. (added by Robin)

tcai- disables and enables artificial intelligence. After casting, everyone stops fighting.

set timescale to 0- stop time. Default: 20. If instead of 0 you enter 10000, then one day will pass in a few seconds

SexChange- change gender to the opposite. The face will not change :)

Showracemenu- open the character creation window, where you can change: race, gender, appearance and name of the character. After changing your race, in early versions of the game, your character's level will become 1. This will also reset all your upgraded skills. In game version 1.3.10.0, after changing the race, the character level remains the same. Before using this command command, be sure to save your game

player.setav invisibility 1- turn on invisibility. After this, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1

player.modav carryweight X- increase the character's maximum carrying capacity by X units

player.setav speedmult X- set the movement speed to X%. Used after running with the key held down. Default: 100%.

player.setscale X - increase the height of your character, where X: 1 - 100%, 2 -200%, etc.

setgs fJumpHeightMin 100- jump height 100% (default).

player.setav Health X

player.setav Magicka X

player.setav Stamina X- set max. amount of strength reserve in X units. If you set the value to a high value, the character will not get tired while running.

player.setav attackdamagemult N- increase weapon damage by N times

player.setav leftweaponspeedmult N- increase the attack speed of a weapon in your left hand by N times

player.setav weaponspeedmult N- increase the attack speed of weapons in the right hand and two-handed weapons by N times

player.setav LeftitemCharge N- load the weapon in your left hand with N charges

player.setav RightitemCharge N- load the weapon in your right hand with N charges

player.additem 0000000F N- get N gold

player.additem 0000000A N- get N master keys

player.placeatme 0010BF90- Summon the Spectral Horse. Can be used indoors

player.setcrimegold 0- cancel the bounty on your head

player.addspell 00092C48- Lycanthropy. Skill for turning into a wolf/werewolf. Appears in the "Talents" section. To activate, use the [Z] key. The skill cannot be cancelled. The transformation back into a human will occur automatically, after a certain period of time.

player.addspell 000B8780- vampirism. Adds the disease "Sanguinare Vampiris". 3 days after infection, you have a 10% chance of becoming a vampire. If, 3 days after using this code, “Vulnerability to Fire” appears in the “Magic” - “Active Effects” section, you are a vampire. And if nothing works, use the command player.removespell 000B8780, after which again player.addspell 000B8780

player.removespell 000B8780- will be cured of vampirism, the disease “Sanguinare Vampiris”, which appears at the first stage of transformation (after the bite). This code does not work after turning into a vampire.

setstage 000EAFD5 10- recover from vampirism. Always heals, but only works 1 time, since the healing occurs after completing the quest (this code ends the quest)

player.moveto (without parentheses)- teleport to the specified object (character)

coc qasmoke- will move to the test location. Here you will find all the game items and tools for making any items.

coc riverwood- leave the test location and move to “Riverwood”. If you enter another name instead of “riverwood”, a teleport will occur to the specified location. Read below to find out the names of teleportation locations.

player.setpos [axis] [number] (without parentheses)- move your character to the specified coordinates. Instead of axis, you must specify x,y or z. And instead of a number - the offset along the selected axis

prid (without parentheses)- select an object by its ID. I do something similar to the following: open the console - click on the object. After this command, the message “(object ID) should appear in the console. After which you can apply all the cheats written below without selecting the object. Using this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of your inventory.

In order for the following codes to work, you must approach the creature (animal or character) or the required object from the front, open the console and click on it with the mouse, and the inscription “(object ID) should appear in the console. Then enter these cheats:

stopcombat- stop the fight with the specified friendly character

Before using this command apply player.setcrimegold 0

If there are several enemy NPCs near you, then to stop the battle you need to apply this cheat for all of them at once, without closing the console.

If at least one NPC attacks you (you did not apply this code to him), then all the others will begin to attack.

If all else fails, take the attackers out of the city (it is recommended to turn on the tgm invulnerability mode before doing this) - use the tcai command (so that everyone freezes and has nowhere to move) - take a comfortable position (so that everyone is in sight) - without closing the console, apply to everyone take turns using the stopcombat command. After the commands have been applied to all characters, enter tcai and tgm again (if these modes were enabled).

All characters hostile to you are shown as red dots on the compass at the top, and until these dots disappear they will attack you.

This command does not work on permanent enemies (monsters and story NPCs), those who always attack you.

kill- kill the selected character/animal

resurrect 1- resurrect

resetai- restore default dialogues - erase the memory of the selected NPC. This command should only be used if you killed someone, resurrected them, and after that they refuse to talk to you

openactorcontainer 1- open the inventory of the selected creature. You can exchange items

removeallitems- clear the inventory of the specified character.

equipitem Item ID - equip the selected character with the specified item (see item IDs below). With this cheat you can dress any character, give him a weapon and put armor on him.

inv- show the inventory contents (list) of the selected object

duplicate allitems player- copy all items from the inventory of the specified NPC or object to your inventory

resetinventory- reset inventory contents. Equip the selected character with the default, initial equipment

setownership- obtain ownership rights to the specified item

unlock- open the lock of the specified object

disable- hide specified objects

enable- show an object that was hidden using the disable cheat

markfordelete- delete the selected object or character. Attention! Using this code, you can delete not only a chest, but also invisible objects that can be selected with the mouse and that are necessary for the normal functioning of the game. Be careful when using this command. Objects you create are deleted immediately, while others are deleted after saving and loading the game. There is no reverse command. It is not recommended to use this command as you may remove a wall, a floor, or an entire building. To remove items, it is recommended to use the disable command, as it only hides the item and does not delete the object.

With the help of the following cheats you can gain control over any monster or character. Do everything strictly in the specified sequence.

switch to “third person view” [F] (it won’t work any other way);

we approach the required character or monster;

open the console, click on it with the mouse and enter the following code;

player.TC

and close the console.

To return to the normal game and gain control of your main character, enter in the console: TC and player.TC

Notes:

After gaining control of an NPC, you will only be able to move with it and will not be able to attack.

If you press attack, your main character will attack, and not the one you control.

How to force NPCs to attack is unknown. If you find a solution to this problem, write in the comments.

Satellites

In Skyrim, almost any character can be made your partner or companion. To do this, do the following:

• approach the required character;
• open the console and click on it (highlight);
• enter setrelationshiprank player 3
• enter addfac 0005C84D 1

After which this character will have a dialogue: “Follow me. I need your help."

Skill Boost

All of the codes below enhance a particular skill by (base value * N%). That is, if your base weapon damage is 15 units, and you entered 200 as the value, then the base damage will be (15 + 15 * 2) = 45 units. To disable the modifier, enter 0 as a value. The exact same formula is used to calculate the duration of spells.

Example: player.setav DestructionPowerMod 100- increase damage from all spells from the school of destruction by 100%

• OneHandedPowerMod - one-handed weapon
• TwoHandedPowerMod - two-handed weapon
• MarksmanPowerMod - bows
• BlockPowerMod - shield
• SmithingPowerMod - blacksmithing
• HeavyArmorPowerMod - heavy armor
• LightArmorPowerMod - light armor
• PickPocketPowerMod - pickpocket
• LockpickingPowerMod - hack
• SneakPowerMod - stealth
• AlchemyPowerMod - alchemy
• SpeechcraftPowerMod - eloquence
• AlterationPowerMod - change
• ConjurationPowerMod - witchcraft
• DestructionPowerMod - destruction
• IllusionPowerMod - illusion
• RestorationPowerMod - restoration
• EnchantingPowerMod - enchantment

Note. Changes to these modifiers are reflected in the descriptions of spells and weapons.

Removing squares when entering cheat codes

Go to the game folder and find the following file:

Skyrim\Data\Interface\fontconfig.txt. Replace the following line:

map "$ConsoleFont" = "Arial" Normal

map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Note. If after this the fontconfig.txt file does not want to be saved or suggests saving a copy of this file, then do the following:

in the properties of this file, look to see if the “Read only” checkbox is checked;

if it is, remove it, change the file, save it and put this checkbox back.

Set the English language in the console

Go to C:\Users\<имя_пользователя>\Documents\My Games\Skyrim and open the Skyrim.ini file. After the lines:

sLanguage=RUSSIAN

add (not replace) the following line

sConsole=ENGLISH

Now in the console you will have English instead of Russian.

Note. If after adding this line the language in the Skyrim console remains the same or you cannot find the Skyrim.ini file (start folder or not) then remove the line sConsole=ENGLISH (if added) and set the default English language in the operating system (how to do this read in the comments on the first page).

Leveling up all skills

Using these cheat codes for Skyrim, you can quickly upgrade all your skills and get all the perks. To do this we will need the following cheats:

advskill N X- raise skill N by X experience units. The main team for leveling up all skills and perks

player.setav N X- set X skill level N. This cheat does not add “ability points”, but is necessary when your skill level reaches 100

player.setlevel N- set character level N (1-255). Can be used to lower a character's level after using the advskill cheat

List of names of all skills for advskill and player.setav commands

Usage example:

advskill Destruction 100 - raise “Destruction” by 100 experience (not levels)

player.setav Block 50 - set the Block skill level to 50

• Alchemy - alchemy
• Alteration - change
• Conjuration - witchcraft
• Destruction - destruction
• Enchanting - enchantment
• Illusion - illusion
• Restoration - restoration
• Marksman - shooting
• Block - block
• HeavyArmor - heavy armor
• LightArmor - light armor
• Lockpicking - hack
• Onehanded - one-handed weapon
• Twohanded - two-handed weapon
• Pickpocket - pick pocketing
• Smithing - blacksmithing
• Sneak - stealth
• Speechcraft - eloquence

To upgrade all the perks of all skills, do the following:

Using the advskill cheat (description above) we raise any skill to level 100

Then we use the code player.setav [skill name] 0 (without brackets) - set the level of the specified skill to 0

Repeat points 1 and 2 until you have upgraded all the perks.

If after this you still don’t understand how to add “ability points” to level up perks, then enter this several times (one at a time):

advskill Destruction 999999

player.setav Destruction 0

After these manipulations, you will receive the required number of “ability points” and can spend them on upgrading all the perks available in Skyrim.

To change the amount of magic, lives and stamina, use the following cheats:

player.setav Health X- set max. number of lives in X units

player.setav Magicka X- set max. amount of magic in X units

player.setav Stamina X- set max. quantity of stock of X units

Armor sets (sets)

To get the required armor set, enter the cheat codes as follows:

player.additem [armor_code] [quantity] (without parentheses)

Example: player.additem 00013938 1 - get 1 glass boots

Dwemer armor set (added by ScRetCh):

• 0001394D - armor
• 0001394E - gloves
• 0001394C - boots
• 0001394F - helmet
• 00013950 - shield

Daedric Armor Set

• 0001396B - armor
• 0001396A - boots
• 000D7A8C - fire suppression boots - +50% fire resistance
• 000D7A8B - Boots of Silence - Silent Movement
• 000D7A8A - mammoth boots - +50 units. thunderstorm potential
• 0001396D - helmet
• 0001396C - gloves
• 0001396E - shield
• 000D7AF9 - grounding shield - +70% electrical resistance
• 000D7AF6 - heat shield - +70% cold resistance
• 0010DFA3 - denial shield - +22% magic resistance

Glass armor set

• 00013938 - boots
• 00013939 - armor
• 0001393A - gloves
• 0001393B - helmet
• 0001393C - shield
• Imperial armor set
• 000136D5 - armor
• 000136D6 - boots
• 000136D4 - bracers
• 00013EDC - helmet
• 000135BA - shield

Elven Armor Set

• 000896A3 - armor
• 0001391A - boots
• 0001391C - gloves
• 0001392A - gilded armor
• 0001391D - helmet
• 0001391E - shield

Leather Armor Set

• 0003619E - armor
• 00013920 - boots
• 00013921 - bracers
• 00013922 - helmet

Dragon Shell Armor Set

• 00013965 - boots
• 00013966 - armor
• 00013967 - gloves
• 00013969 - helmet
• 00013968 - shield

Dragonscale Armor Set

• 0001393D - boots
• 0001393E - armor
• 0001393F - gloves
• 00013940 - helmet
• 00013941 - shield

Ebony Armor Set

• 00013960 - boots
• 00013961 - armor
• 00013962 - gloves
• 00013963 - helmet
• 00013964 - shield

Orc Armor Set

• 00013956 - boots
• 00013957 - armor
• 00013958 - mittens
• 00013959 - helmet
• 00013946 - shield

Forsworn Armor Set

• 000D8D50 - armor
• 000D8D4E - boots
• 000D8D55 - bracers
• 000D8D52 - helmet (horns)

Nightingale armor set

• 000FCC0F - armor
• 000FCC11 - gloves
• 000FCC0D - boots
• 000FCC12 - hood (helmet)

Blades armor set

• 0004F912 - shield
• 0004B28F - helmet
• 0004B288 - boots
• 0004B28D - gloves
• 0004B28B - armor

Wolf Armor Set

• 000CAE15 - armor
• 000CEE7C - boots
• 000CEE7E - gloves
• 0004C3D0 - helmet

Stormcloak Officer's Armor

• 0008697E - armor
• 00086981 - boots
• 00086983 - gloves
• 00086985 - helmet

Ancient Nord armor

• 00018388 - armor
• 00056A9D - boots
• 00056A9E - helmet
• 00056B17 - gloves

Thieves Guild Armor

• 000D3AC4 - gloves
• 000D3ACE - hood
• 000D3ACC - armor
• 000D3AC2 - boots

Armor of the head of the Thieves Guild

• 000E35D7 - armor
• 000E35D9 - hood (helmet)
• 000E35D8 - gloves
• 000E35D6 - boots

Unique armor with bonuses

• 0007C932 - “Archmage’s Robe” (armor) - +100% to the speed of magic recovery; all spells cost 15% less magicka
• 000F9904 - “Scholar's Diadem” (helmet) - All spells consume less magic
• 000FC5BF - “Tarch of Bloodlust” (shield) - A hit with a shield deals 3 units. damage over 5 sec
• 000E41D8 - “Shield of Ysgramor” - +20% magic resistance; +20 units health
• 000295F3 - “Ingol’s Helm” - +30% cold resistance

Accessories with bonuses

• 000С8911 - “Akatosh’s Amulet” - +25% to the speed of magic recovery
• 0002D773 - “Amulet of Gauldur” - +30 units. magic, health and stamina
• 00100E65 - “Necklace of Immunity and Disease” - 100% immunity to disease
• 000C891B - “Amulet of Mara” - Restoration spells consume 10% less magic. Essential for a wedding.

Masks (helmets) with bonuses

• 00061CB9 - “Krosis” - +20% to hacking, archery and alchemy skills
• 00061C8B - “Morokey” - +100% magic recovery speed
• 00061CA5 - “Nakrin” - spells from the school of destruction and restoration consume 20% less mana; +50 mana
• 00061CC9 - “Vokun” - spells from the school of illusion, change and witchcraft spend 20% less mana
• 00061CC2 - “Flock” - resistance to fire, electricity and cold increases
• 00061CC0 - “Ragot” - +70 stamina
• 00061CAB - “Volsung” - 20% discount on all products; breathing underwater; +70 load capacity
• 00061CC1 - “Hevnorak” - immunity to diseases and poisons
• 00061CCA - "Wooden Mask"
• 00061CD6 - “Konarik” - When health is low, gives a chance to heal the wearer and cause damage to nearby enemies

Weapon sets

To get the necessary weapons, enter cheat codes in the following form:

player.additem [weapon_code] [quantity] (without parentheses).

Example: player.additem 000139A8 1 - get 1 glass bow

Glass weapons:

• 000139A3 - one-handed ax
• 000139A4 - two-handed ax
• 000139A9 - one-handed sword
• 000139A7 - two-handed sword
• 000139A8 - mace
• 000139AA - war hammer (two-handed)
• 000139A5 - bow
• 000139A6 - dagger

Daedric weapons

• 000139B4 - ax
• 0001DDFB - inferno ax - +30 units. fire damage; sets the target on fire
• 0001DFCB - thunderstorm ax - +30 units. electrical damage; takes away 15 units. of magic
• 000139B5 - bow
• 0001DFEF - petrification bow - Chance to paralyze the target for 6 sec
• 0001DFE6 - inferno bow - +30 units. fire damage; sets the target on fire
• 0001DFE9 - winter bow - +30 units. cold damage; takes away 30 units. reserve of strength
• 0001DFF2 - bow of thunder - +30 units. electrical damage; takes away 15 units. of magic
• 0001DFFC - Sacred Bow - Undead level 40 and below flee for 30 sec
• 000139B6 - dagger
• 000139B7 - two-handed sword
• 000139B8 - mace
• 000139B9 - sword
• 000139B3 - battle ax
• 000139BA - war hammer

Imperial weapons

• 000135B8 - sword
• 00013841 - bow

Dwarven weapons

• 00013994 - ax
• 00013995 - bow
• 00013996 - dagger
• 00013997 - two-handed sword
• 00013998 - mace
• 00013999 - sword
• 00013993 - battle ax
• 0001399A - war hammer

Elven weapons

• 0001399C - battle ax
• 0001399E - dagger
• 0001399F - great sword
• 000139A0 - mace
• 000139A1 - sword
• 0001399D - bow
• 000139A2 - war hammer

Ebony weapon

• 000139B1 - sword
• 000139AD - bow
• 000139B2 - war hammer
• 000139B0 - mace
• 000139AC - battle ax
• 000139AB - ax
• 000139AF - two-handed sword
• 000139AE - dagger

Orc weapons

• 0001398B - battle ax
• 0001398C - ax
• 0001398D - bow
• 0001398E - dagger
• 0001398F - two-handed sword
• 00013990 - mace
• 00013991 - sword
• 00013992 - war hammer

Forsworn Weapons

• 000СС829 - ax
• 000CADE9 - sword
• 000CEE9B - bow
• 000AE087 - heather geas (5 units of additional damage to Nords)

Nightingale weapon

• 000F6527 - blade
• 000F652C - bow

Blade Weapons

• 0003AEB9 - sword

Ancient Nordic weapons

• 0002C66F - sword
• 000236A5 - two-handed sword
• 0001C864 - hammer
• 0002C672 - ax

Unique weapons with bonuses

• 000F1AC1 - “Dragon Scourge” - +40 units. damage to dragons and +10 units. Electric damage against all
• 000F5D2D - “Pale Blade” - +25 units. cold damage; subtract 50 stamina from the target; weaker creatures and people take flight for 30 seconds
• 000956B5 - "Wuthrad" - Especially deadly against elves
• 000B3DFA - "Chalk's Eye" - Fiery explosion deals 40 damage. damage in a radius of 4.5 m and sets targets on fire
• 000A4DCE - “Bloody Spike” - Fills the soul stone if the enemy dies within 3 sec.
• 00053379 - “Fierce” - +15 units. cold damage; takes away 15 units. the enemy's reserves of strength
• 000F8317 - “Cooler” - +30 units. cold damage; Chance to paralyze target for 2 seconds
• 0001C4E6 - “Axe of Sorrow” - Takes away 20 units. the enemy's reserves of strength
• 00035369 - “Staff of Magnus” - Absorbs 20 units. magic per second, if the enemy has no magic - absorbs his health
• 0010076D - “Staff of Hevnorak” - For 30 sec. deals 50 damage. damage per second from lightning. Apply to surface
• 000AB704 - “Holdir’s Staff” - Calms weak enemies for 60 sec. or captures their souls if they die
• 000E5F43 - “Staff of Yurik Goldurson” - deals 25 damage. damage and takes away 50 units. of magic
• 00094A2B - “Phantom Blade” - +3 units. extra damage, ignoring armor
• 000AB703 - “Curse of the Red Eagle” - Sets undead level 13 and below on fire and causes them to flee for 30 sec.
• 0009FD50 - “Red Eagle’s Fury” - +5 units. fire damage and sets the target on fire
• 000B994E - “Valdar’s Lucky Dagger” - +25% critical strike chance
• 0006A093 - “Staff of Tandil” (staff) - Creatures and people of level 12 and below do not fight for 60 sec

Notes:

Additional damage from weapons was indicated for a first level character without upgraded skills.

All descriptions and names were taken from the game. "Yurik Goldurson's Staff" is what it is called in the game, not "Yurika". Perhaps this is a localization error.

Only the latest (most powerful) versions of weapons were added.

Daedric Artifacts

The Daedric Artifact IDs below must be used in the cheat code as follows:

Example: player.additem 000240D2 1 - get 1 dagger “Mehrunes’ Razor”

Weapon

• 000240D2 - “Razor of Mehrunes” (dagger) - Chance to kill the enemy when dealing damage
• 000233E3 - “Mace of Molag Bala” (mace) - Takes away 25 units. reserve of strength and magic. Fills a soul gem if an enemy dies within 3 seconds
• 0004E4EE - “Radiance of Dawn” (sword) - +10 units. damage When killing undead, there is a chance of a fiery explosion that drives away or destroys nearby undead
• 000EA29C - “Ebony Blade” (two-handed sword) - The target does not perceive a weapon attack as an attack
• 0001C4E6 - “Axe of Sorrow” (two-handed axe) - Takes away 20 units. the enemy's reserves of strength
• 0002ACD2 - “Volendrung” (two-handed hammer) - Takes away 50 units. reserve of strength
• 0002AC6F - "Wabbajack" (staff) - Random effect each time you use it
• 0001CB36 - “Rose of Sanguine” (staff) - Summons Dremora for 60 sec
• 00035066 - “Skull of Corruption” (staff) - +20 units. damage Dreams collected from sleeping people increase damage to 50 units

Armor

• 0002AC61 - “Skin of the Savior” (light armor) - +50% resistance to poisons and +15% magic
• 00052794 - "Ebony Chainmail" (heavy armor) - You move more quietly, and enemies who get too close take 5 points of poison damage per second
• 000D2846 - “Mask of Clavicus Vile” (heavy helmet) +10 to eloquence. Magicka recovery speed +5%. Favorable prices +20%
• 00045F96 - “Spell Breaker” (shield) - After blocking, absorbs up to 50 units. spell damage

Other

• • 0002C37B - “Ring of Namira” - +50 units. reserve of strength. Devouring corpses increases your health and recovery speed
  • 0002AC60 - “Ring of Hircine” - Additional transformation for revolfs
  • 0001A332 - “Ogma Infinum” (book) - After reading, you can get +5 to the following skills (only 1 of 3 lines is randomly selected):

Smithing, Blocking, Shooting, One-Handed Weapon, Two-Handed Weapon, Heavy Armor, Hacking, Light Armor, Stealth, Pickpocketing, Speech, Alchemy, Illusion, Affliction, Destruction, Restoration, Enchantment, Alteration

• 00063B27 - “Star of Azura” - Infinite Soul Stone
• 00063B29 - “Black Star” - Soul Stone
• 0003A070 - “Skeleton Key” - Infinite master key

Screams of Dragons

Using the psb cheat code “get all spells, dragon screams and talents” or add only the necessary screams using the cheat:

player.teachword- learn a scream (list of all shout IDs below)

Example: player.teachword 20e17 - learn the first word of the Fire Breath shout

To learn word 3 of the dragon's cry, you must first learn 1 and 2, it won't work any other way. To study “Ice Form” level 3, you must enter the following:

player.teachword 602A3 - first word

player.teachword 602A4 - second

player.teachword 602A5 - third

Dragon shout IDs for player.teachword code (without parentheses)

first word / second / third - name of the cry (use only 1 of 3):

• 46B89 / 46B8A / 46B8B - Call of the Dragon
• 13E22 / 13E23 / 13E24 - Ruthless Force
• 602A3 / 602A4 / 602A5 - Ice form
• 6029A / 6029B / 6029C - Storm Call
• 20E17 / 20E18 / 20E19 - Fire Breath
• 48ACA / 48ACB / 48ACC - Time dilation
• 2F7BB / 2F7BC / 2F7BD - Swift Charge
• 60291 / 60292 / 60293 - Friendship with animals
• 3291D / 3291E / 3291F - Elemental Fury
• 32917 / 32918 / 32919 - Ethereality
• 5D16C / 5D16D / 5D16E - Frost Breath
• 602A0 / 602A1 / 602A2 - Voice cast
• 5FB95 / 5FB96 / 5FB97 - Disarmament
• 3CD31 / 3DC32 / 3CD33 - Clear Sky
• 51960 / 51961 / 51962 - Call of Valor
• 44251 / 44252 / 44253 - Dragon Slayer
• 60297 / 60298 / 60299 - Death sentence
• 60294 / 60295 / 60296 - Whisper of aura
• 6029D / 6029E / 6029F - Kin World
• 3291A / 3291B / 3291C - Fright

To use Dragon Shouts, you first need to activate them using Dragon Souls. That is, kill the dragon or add the required amount using the cheat:

player.modav dragonsouls N- get N souls of dragons. This cheat sets the total number of dragon souls absorbed, rather than adding N pieces.

To activate dragon screams, press - Magic - Shouts - select the required scream that you want to activate - press [R] - Ok. Now you can use this shout.

player.setav shoutrecoverymult 0- dragon screams have no cooldown or cooldown for reuse. If you entered this code after using a shout, you will need to wait until it is restored, after which you can use this shout all the time without waiting for it to be restored.

Ingredients, Soul Stones, Potions, Arrows

To get the required item, the IDs of which are below, you must use the cheat code in the following form:

player.additem [amount] (without parentheses)

Example: player.additem 00039BE5 10 - get 10 potions of full health restoration

Potions

• 00039BE5 - fully restores health
• 00039BE7 - fully restores magic
• 00039CF3 - fully restores strength
• 00073F34 - “Deadly poison” - 65 units. poison damage
• 00039D12 - "Enchanter's Elixir"
• 00039967 - “Blacksmith’s Elixir”

Soul stones

• 0002E4F4 - large (empty)
• 0002E4FB - big (Large)
• 0002E4FC - great (empty)
• 0002E4FF - great (Great)
• 0002E500 - black (blank)
• 0002E504 - black (Great)
• 00063B27 - Star of Azura (empty)
• 00063B29 - Azura's Black Star (empty)

Arrows

• 00038341 - Falmer
• 00034182 - ancient Nordic
• 000236DD - dart (can only be obtained after completing the main storyline)
• 00020F02 - rusty iron
• 00020DDF - iron
• 000139C0 - Daedric
• 000139BF - ebonite
• 000139BE - glass
• 000139BD - elven
• 000139BC - Dwemer
• 000139BB - orcish
• 0001397F - steel

Ingots

• 0005ACE5 - steel
• 0005ACE4 - iron
• 0005ACE3 - silver
• 0005AD93 - carundum
• 0005AD99 - orichalcum
• 0005AD9D - ebonite
• 0005AD9E - gold
• 0005ADA0 - mercury
• 000DB8A2 - Dwemer metal
• 0005ADA1 - purified malachite
• 0005AD9F - purified moonstone

Skins

• 0003ad52 - bearish
• 0003AD8F - cow
• 0003AD90 - deer
• 0003AD8E - goat
• 0003AD93 - horse
• 0003AD75 - snow wolf
• 000DB5D2 - leather
• 000800E4 - leather strips
• 0003AD74 - wolf

Gems

• 00063B46 - amethyst
• 00063B47 - diamond
• 00063B45 - garnet
• 00063B43 - emerald
• 00063B42 - ruby
• 00063B44 - sapphire
• 0006851E - flawless amethyst
• 0006851F - flawless diamond
• 00068521 - flawless garnet
• 00068520 - flawless emerald
• 00068522 - flawless ruby
• 00068523 - flawless sapphire

Other

• 0003AD5B - Daedra heart
• 0003ADA3 - dragon scales
• 0003ADA4 - dragon bones
• 000E7ED0 - hawk feathers
• 0003AD60 - Salt of the Void

Treasure Chests

Each chest contains all the items of its class. For example, a chest with staves contains ALL staves, and a chest with ingredients contains ALL ingredients. To get these treasure chests use the following cheat codes for Skyrim:

player.placeatme (no parentheses)

Example: player.placeatme 000C2CDE - get a chest with all the staves

• 000C2CDF - enchanted weapon
• 000C2CD7 - enchanted armor, jewelry, clothing for a mage and robber
• 000C2CE0 - standard weapon
• 000C2CD6 - standard armor
• 000C2CDE - staves
• 000C2CD8 - armor and jewelry, clothing for a mage and robber
• 0010D9FF - skill books
• 000C2CD9 - spell books
• 000C2D3B - regular books
• 000C2CD4 - arrows
• 000C2CDA - ingredients
• 000C2CDB - keys
• 000C2CE1 - scrolls with spells
• 000C2CE2 - potions, elixirs and tinctures

Notes:

After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.

If, after opening a chest with enchanted weapons/armor, you press [R] instead of just one item (take all), then the duration of the freeze will be reduced several times.

Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients), find out the ID of the item (read how to do this below) and create the required amount of these items using the cheat player.additem ID quantity

Passing quests

To complete quests in Skyrim we will need the following cheat codes:

showquesttargets- shows the ID of the active quest

getstage (no parentheses)- shows the stage of completion of the specified quest (the resulting number is not % of completion)

setstage [stage] (without parentheses)- set execution stage

movetoqt (no parentheses)- teleportation to the key point (the last unfinished stage) of the specified task

sqs (without parentheses)- show a list of all stages of the active quest (they are different for each quest). Used in the setstage cheat

resetquest (no parentheses)- reset all stages of the quest, after which it can be completed again. In order for this quest to be deleted from the Quest Log, you must save and load the game

player.completequest (no parentheses)- complete the quest. This command is not recommended, as you will not be able to receive the next quest if it is a quest chain. Use only if you want to complete the quest without the possibility of further progress.

The Elder Scrolls V: Skyrim is a role-playing game with a completely open world. The game was released back in 2011. Over the entire period of its existence, a huge number of cheat codes have already appeared on Skyrim, which add skills, money, dragon souls, ability points and much more. The passage becomes even more exciting. In this article we will present the most useful and interesting codes.

Activating cheat codes for The Elder Scrolls V: Skyrim

You need to do a couple of easy steps:
1) Open the console using the "~" key
2) Enter the desired command
3) Press Enter

Basic and additional codes:

♦ tcl– the ability to pass through walls
♦ tgm– complete stability
♦ tmm 1– all locations are open and available for movement
♦ psb- spells, dragon calls and talents are fully studied
♦killall- kills non-player characters near the hero
♦ qqq– exit the game
♦advlevel– level up without abilities
♦ tfc– moving camera
♦ tdetect– NPCs no longer react to theft
♦ tcai–AI turns off
♦ set timescale to 0- time freezing. By changing the number you can speed it up and slow it down
♦sexchange– the character’s gender changes
♦ showracemenu– hero creation window
♦ player.setlevel X– character level increases or decreases (1-255)
♦ player.setav invisibility 1– stealth mode is on
♦ player.setav invisibility 0– stealth mode is turned off
♦ player.setav speedmult X– character speed changes
♦ player.setscale X– change of hero’s height, (X-1=100%, etc.)
♦ setgs fJumpHeightMin 100– adjusts jump height
♦ player.setav Health X- change the number of lives
♦ player.setav Magicka X- change the amount of magic
♦ player.setav Stamina X– change in the amount of power reserve
♦ player.setav attackdamagemult X- change weapon damage
♦ player.setav leftweaponspeedmult X- change the attack speed of one-handed weapons
♦ player.setav weaponspeedmult X- change the attack speed of additional and two-handed weapons
♦ player.setav LeftitemCharge X– the main weapon is charging
♦ player.setav RightitemCharge X– additional weapon charge
♦ player.additem 0000000F X- adds gold coins
♦ player.additem 0000000A X– adds master keys
♦ player.placeatme 0010BF90– a spectral horse appears
♦ player.setcrimegold 0– the reward for killing your character is canceled
♦ player.addspell 00092C48- adding the skill “Lycanthropy”
♦ player.addspell 000B8780- adding the skill “Sanguinare Vampiris”
♦ player.moveto– move to non-player character
♦ coc qasmoke- move to the test location
♦ coc riverwood- move from the test location to any other
♦ player.setpos [coordinates] [number]- move character
♦ player.getpos [coordinates]– location of the character
♦ player.removeallitems– inventory is cleared

Actions with items and NPS:

♦prid- select an object by id
♦ stopcombat– stop a fight with a non-player character
♦ kill– kills the selected object
♦ resurrect 1– resurrection
♦ resetai– clears conversations with NPCs
♦ openactorcontainer 1– opens the inventory of any character
♦ removeallitems– clearing the inventory of the selected character
♦ equipment– adds an item to any hero
♦inv– selected character’s inventory
♦ duplicateallitems player– moving objects from a non-player character’s inventory to yours
♦ resetinventory– return of inventory contents
♦ setownership– obtaining rights of use for any object
♦ unlock– opening the lock
♦ disable– the selected item is hidden
♦enable– the selected item is displayed
♦ markfordelete– removing an object or non-player character

These were the basic commands. Let's move on to the most interesting part: leveling up skills

advskill X Y- gaining X skill Y experience

player.setav X Y- obtaining Y level of skill X

player.setlevel X- change character level

♦ Alchemy- alchemy
♦ Alteration- change
♦ Conjuration- sorcery
♦ Destruction- destruction
♦ Enchanting- enchantment
♦Illusion- illusion
♦Restoration- healing
♦ Marksman- shooting
♦Block- block
♦ Heavy Armor- heavy armor
♦ Light Armor- light armor
♦Lockpicking- opening
♦ One-handed- one-handed weapon
♦ Two-handed- Two-handed weapon
♦Pickpocket- petty theft
♦ Smithing- blacksmith craft
♦ Sneak- secrecy
♦ Speechcraft- oratory

These were the most necessary codes and commands, good luck!

general information

Console commands are a powerful in-game tool and are only available on the PC version of the game. With their help, you can change many aspects of the game and get additional information about NPCs, creatures, items, etc.

The console is accessed by pressing the "~" key (on some keyboard models this may be another key).

Console commands are not case sensitive: you can enter TAI or tai or TaI - in any case the AI ​​will be switched.

Some commands can be entered in full or abbreviated. For example, tai or toggleai are considered the same command and entering either will disable the AI.

Many commands require you to specify the target to which they will be applied. You can use prefixes for this. For example, in the case of player. the command will be applied to the player. Or RefID. - the command will be applied to the object with the specified identifier. The target can also be specified by clicking on it with the mouse, and the object identifier should be displayed in the top line of the console. For most of the commands, lists of FormIDs of corresponding objects are provided. In addition, the command can help you find out the ID of the desired object help. For example, the command help elven sword 0 will show a list of all objects whose names contain the string elven sword. The command works for items, spells and perks.

Important: Use console commands with caution! You can easily ruin your current game if you change the wrong settings. Moreover, errors from incorrect use of the console may appear later, in the form of incomplete quests. If you are trying to fix a bug using the console, then use the least powerful commands available.

When a command requires an argument (for example, additem ) brackets<>mean that And should be replaced with item ID and quantity accordingly. The command must be entered without parentheses.

Team	Description
Switchable commands These commands enable or disable something.
animcam	Enables the 3rd person camera, allowing you to zoom and rotate it around your character.
psb	Adds all spells to the player, including shouts and racial abilities. However, the screams will still require dragon souls.
s1st	The command only works in 3rd person camera mode. It shows your hands, looking like they were in 1st person camera mode, behind the character model. Those. you see the entire character, but your hands follow your movements as in the 1st person camera.
sucsm	Changes the movement speed of a free-flying camera. Example: The sucsm 50 command after entering the tfc command will cause the camera to move approximately five times faster than its default speed. The full name of the command is "SetUFOCamSpeedMult".
tai	The command enables or disables artificial intelligence (AI). If a target object is not selected when executing a command, AI will be enabled/disabled for all actors at once.
tcai	Enables or disables combat AI.
tdetect	Enables or disables AI character detection. This means that if the command is turned off, NPCs will not "see" you, even if you are right in front of them or attacking them.
tc	If the command is applied to the selected NPC, then camera control will be transferred to him, and you will see your character from his side, while maintaining control over him, until the tc command is applied again.
tcl	Essentially, you will be able to fly. Select a point and move towards it through obstacles, buildings or landscape. If an actor is not selected when executing a command, it will be applied to the player, i.e. barriers will be disabled for him. But, for example, if you are stuck somewhere on a horse, then the command must be applied to both the player and the horse.
teofis	Disables blur, contrast adjustment and a number of other effects. To the detriment of the beauty of the picture, it will give a slight increase in performance on “weak” video cards.
tfc<1>	Enables "free" camera mode. If you add 1 to the command, the surrounding world will be frozen, but camera control will remain available.
tgm	God 'mode. You will not receive damage, magic and stamina will not be wasted, the carried weight will be unlimited, the arrows will be endless, and all spells will be available.
tim	Immortality mode. Everything will be as usual, except that when the character's health reaches 0, he will not die.
TLL	Significantly reduces the scene's render distance, which will improve performance but may cause graphical artifacts.
tm	Enables or disables the display of all menus and interface elements. The command is useful for taking screenshots.
tmm (,,)	Control the display of map markers. If the first digit is 1, then all markers will be shown, if 0, all markers will be hidden (including the main ones, which are visible to the player when starting the game). When adding markers, the second parameter determines whether the marker is available for fast travel (1) or not (0), and the third determines the type of marker - all (0) or hidden (0). For example, to open all unexplored markers, but without the ability to fast travel to them, you need to enter tmm 1,0,0
tfow	Enables or disables the display of "fog of war" (unexplored areas) on the local map.
tscr	Enables or disables scripts.
twf	Enables or disables grid display.
ts	Enables or disables the display of the sky.
tg	Enables or disables the display of grass.
tt	Enables or disables the display of trees.
tws	Enables or disables the display of water (the view under water will not be changed).
Commands to target These commands must be applied to some object. You can enter its identifier (RefID) manually, select the object with the cursor, specify the player prefix (in this case, the command will be applied to the player), or specify the object with the prid command.
additem <опциональный флаг>	Adds an item to the player in quantity . The purpose of the second possible optional flag is unknown; perhaps it controls the ownership of items. Look for the item ID in the corresponding list: arrows, armor and clothing, notes and books, food and drink, ingredients, keys, potions and poisons, soul stones, weapons and other items.
addperk	Adds a perk with the specified ID to the player. See this list for perk IDs.
addspell	Adds a spell with the specified ID to the player. Works for spells, abilities, blessings and diseases, but not for shouts. Look for the spell ID in the corresponding list.
addtofaction <ранг>	Adds an actor to the specified faction. Rank numbers vary across factions, but 0 always means the lowest rank, and -1 means removal from the faction.
addfac	A shortened version of the previous command.
advlevel	Increases the player's current level by one point, but the level up screen will not appear and perk points will not be added.
AdvSkill	Adds one experience point to the progress of the specified skill. The number means the number of experience points, and not an increase to the skill itself. That is, the command player.advskill destruction 1 will add one experience point to destruction, but the destruction skill itself will not increase by 1. For a complete list of skills and abilities, see this page.
DamageActorValue<атрибут>	Deals N damage to the specified attribute. Example: player.damageactorvalue health 50 will cause you to lose 50 health as if you were damaged. Health will be restored as usual. Attribute values ​​may become negative. You can restore values ​​using the restoreactorvalue command. See the list of attributes.
disable	Disables object rendering. The object becomes invisible, its collisions are disabled, and it will not be processed by the AI. But, at the same time, scripts associated with the object will continue to work (unlike Oblivion).
dispelallspells	Dispels all temporary magical effects on the target.
drop	Allows you to forcefully discard an item from your inventory (including quest items). Usage: player.Drop <кол-во>
duplicate allitems	Creates a copy of all items in the target container and places them in the specified container. For example, the command a2c94.duplicateallitems 89c79 will create a copy of all the items in Lydia's inventory and place them in container 89c79.
enable	Enables rendering of an object disabled by the disable command, its collisions, and AI operation.
equipitem	Equips the selected NPC with an item with the specified ID. There is also a reverse command with the same syntax - unequipitem.
forceAV<атрибут>	Changes the value of an attribute by permanently adding the specified value (positive or negative) to it. The displayed value of the modified attribute will be highlighted in colored text (red or green), depending on the added value (positive or negative). A complete list of attributes is available.
getAVinfo<атрибут>	The command will provide brief information about the specified parameter (skill or attribute) of the selected actor. You can select the target actor with the mouse, or use his RefID. For example, the command player.getavinfo lightarmor will display basic information about the player's Light Armor skill.
getlevel<цель>	Displays the level of the specified NPC or creature.
GetLocationCleared	Displays whether the location has been cleared.
getrelationshiprank<цель>	Displays the rank of relationships between NPCs. Possible values ​​range from -3 to +4.
getstage	Displays the current stage number of the specified quest.
incPCS<название навыка>	Increases the selected skill to the next level. For example, the incpcs lightarmor command will increase the value of the Light Armor skill. There is no need to indicate any numbers after the name of the skill.
kill	Kills the selected actor. Some characters have essential status and cannot be killed. Instead, they fall to their knees, miming their death throes, but then rise again.
lock<уровень>	Locks the selected container with a lock of the specified difficulty. 0-25: Apprentice, 26-50: Adept, 51-75: Expert, 76-100: Master, 101 and above: Key required.
MarkForDelete	Marks an object for deletion. The object will be deleted the next time the area is rebooted. The command can be useful, for example, for removing furniture in the house. Be careful because... deleted objects cannot be restored.
modAV<атрибут>	Changes the value of an attribute using a permanent modifier (positive or negative). The displayed value of the changed attribute will be highlighted in colored text (red or green). A complete list of attributes is available.
moveto	Moves the player to the specified actor.
movetoqt	Moves the player to the target of the specified quest.
openactorcontainer 1	Opens the specified actor's inventory, allowing items to be added and removed as if it were a regular container.
paycrimegold<0-1> <0-1>	Paying a fine for the faction to which the target NPC belongs. The first parameter (0-1) determines whether you will go to prison (1) or not (0), the second parameter (0-1) determines whether you keep all stolen items (1) or not (0). The faction ID must be specified if you cannot identify the target NPC.
placeatme	Places the specified actor or object at the player's position. For example: player.placeatme 000fea9b will place a dragon next to you. The command uses base IDs rather than reference IDs and creates a new instance of the object. It is not recommended to use this command on named quest NPCs. See list of creatures and NPCs.
pushactoraway <число>	Pushes the actor in a random direction.
recycle actor<ссылка на пункт назначения (опционально)>	Revives/resets target NPC. Can be used to reset the target NPC's state. If you have already examined the remains and taken things, then the NPC may be reborn decapitated (especially for Nords). Inventory status is not reset, with the exception of weapons. The priority enemy for the reset NPC will not be the player, but the actor of the opposing faction.
removeallitems	Removes all items in the specified container or actor's inventory. You can also enter the RefID of the container into which all items will be moved.
removeitem <кол-во>	Removes the specified number of items from the actor's inventory.
removeperk	Removes the selected perk. See the full list of perks.
removespell	Removes the selected spell from the character's spellbook. Works with spells, blessings, diseases, but not with shouts. See the full list of spells.
resetAI	Resets the AI ​​of the specified actor. Can be used to calm down peaceful NPCs that you accidentally attack. When cast on an enemy NPC, it will cause them to sheathe their weapon, after which they will draw it and attack again.
resethealth	Fully restores the health of the player or the specified actor.
resetinventory	Restores the actor's inventory state to its default value. Works for killed creatures/NPCs as well.
resurrect<1>	Revives the specified actor. Before this command is used, the NPC is considered dead and does not appear in quests or dialogues. Adding the number 1 at the end (i.e. typing resurrect 1) will cause the actor to respawn in the same place and retain their inventory, rather than simply disappearing and reappearing in the game world (it has been confirmed that in the PC version of the game the command does not always work correctly ).
RestoreActorValue<атрибут>	Restores a damaged attribute or skill by the specified N value.
setactoralpha<0-100>	Changes the alpha/opacity of the selected actor. Can be used to fix graphical bugs with the display of the effects of some spells.
setAV<атрибут>	Sets the attribute value to the specified value without adding experience or perk points. A list of attributes is available.
setessential<базовый ID> <1/0>	Makes the specified actor mortal (0) or immortal (1). Using this command, you can make the selected NPC unkillable (if his health drops to 0, he will fall to his knees, after which he will rise again after a while). Keep in mind that the team must use the base actor ID, which you can find in the corresponding list.
setgs<параметр> <значение>	Changes the specified game setting (GameSetting). When you reload the game, you will have to enter the command again, because... it is not saved in save files.
setlevel A B C D	Sets the actor's level to the given value. A – actor’s level compared to the player, 1000 = 100%, B – possible range of levels (the parameter is outdated, set to 0), C – minimum actor level, D – maximum actor level.
SetLocationCleared 1	Marks the location as cleared. Look for location ID in the corresponding list: interiors, exteriors.
setnpcweight<0-100>(snpcw)	Sets the weight of the specified NPC and updates its model if necessary.
setownership	Sets the player's ownership of the specified object.
setrace<раса>	Changes the player's race.
setrelationshiprank<цель> <#>	Changes the relationship between two actors. 0 = acquaintance, 1 = friend, 2 = confidant, 3 = ally, 4 = lover, -1 = rival, -2 = enemy, -3 = enemy, -4 = archenemy. All other entered values ​​will be treated as 0.
setscale<#>	Changes the size of the player character, valid values ​​are from 0.1 to 10.
setstage <стадия #>	Sets the stage of the quest. For a list of quests, see the corresponding page.
completequest	Completes the specified quest.
setunconscious<целое число>	The setunconscious 1 command will cause the NPC to ignore the player no matter what they do. You can steal something, or attack an NPC, and after entering the command setunconscious 1, he will act as if nothing happened.
showinventory	Displays the base IDs of each item in the actor's inventory.
shp<параметр #1-параметр #9>	Manage HDR settings.
sifh<#>	Sets friendly fire (1) to be ignored for the selected actor.
sqs	Displays the stages of the specified quest.
str<0-1.000000>	Sets the light refraction value for the selected object.
teachword<слово>	Adds a word with the specified code to the player. See list of power words.
unequipitem	Forces the target NPC to remove an item with the specified ID.
unlock	Unlocks a container or door.
Commands without specifying a goal There is no need to specify a target for these commands.
bat	Launches the specified text file with console commands.
caqs	Completes all quests in the game, even those you haven't started yet. The command will open some achievements, but it is still not recommended for use, because... may cause the game to crash.
coc<имя ячейки>	Moves the character to the center of the specified area. For example, the command coc Riverwood will move the player to Riverwood. Look for the required location IDs in the corresponding lists: interiors, exteriors.
cow	Moves the character to the x,y coordinates of the specified world area.
csb	Removes all blood effects from the screen.
fov<угол>	Changes the camera's viewing angle (Field of View).
fw	Changes the current weather. For a list of required IDs, see the corresponding page.
GetGlobalValue<переменная>	Returns the value of the specified global variable. Also see the ShowGlobalVars command.
GetInCellParam	Checks whether an object is in the specified cell.
GetPCMiscStat	Command to display specified statistical information.
help<текст> <0>	Returns all information about objects (ID, parameters, etc.) whose names contain the string specified in the second parameter.
killallactors	Instantly kills all non-immortal actors in the currently occupied area. The shortened version is killall.
ModPCMiscStat	A command that modifies a player's specified statistic by adding a permanent modifier to it.
Prid	Selecting an object by its identifier. The command has the same effect as selecting an object with the cursor; it is useful if the object is out of sight.
pcb	Clearing memory buffers for the current cell.
qqq	Quick exit from the game.
resetinterior	Resets the specified interior to its default state.
resetquest	Reset the specified quest. Its stage will be set to 0.
save<название>	Creates a save file with the specified name.
saq	Starts all quests in the game and adds them to the character's journal.
set to	Sets the value of a global variable to N.
set timescale to	Changes the timescale parameter (default is 20), which is responsible for the speed of time in the game.
setplayerrace	Changes the character's race. If a race code is not specified, a character generation window will appear with a choice of race. Race codes can be obtained with the help race 0 command. Unlike other commands, you must specify not the race ID, but the name, for example nordrace. Corrupts the current values ​​of all skills and attributes.
player.setrace	Changes the character's race. Race codes can be obtained with the help race 0 command. Unlike other commands, you must specify not the race ID, but the name, for example nordrace. Does not spoil the current values ​​of all skills and attributes.
ShowGlobalVars	Shows the values ​​of all global game variables that can be changed with the set command.
SexChange	Changes the character's gender to the opposite.
ShowMessage	Shows a message with the specified ID.
showracemenu	Opens the character creation menu. Using this command to change race will reset all skills and attributes. The command can be safely used to change a character's appearance as long as the race is not changed.
showracemenu<раса>	The command changes the character's race without calling the menu, similar to the setplayerrace command. Example: showracemenu bretonrace
player.recycleactor	Resets the player's inventory, adding a set of essential items: a set of iron armor, a bow, a weapon, several potions, 10 master keys and 2 torches.
playerenchantoobject	Creates an object with the specified enchantment parameters.
playercreatepotion	Creates a potion with three specified effects.

We present to you a list of all current cheats with which you can get a huge list of benefits. Codes for money, skills, armor, weapons, ability points, dragon souls and much more in Skyrim.

Many cheats are switches, that is, the effect of such console commands in Skyrim after activation can be turned off back. By the presence of a mark, you can recognize such codes in the table.

How to enter any cheats into Skyrim

To use codes in Skyrim, press ~ (tilde), and then in the console that opens, enter the desired combination and apply it with the Enter button.

Complete list of various cheats on Skyrim

Entered code	Execution result
tcl	Gives your hero in Skyrim the ability to walk through walls
tgm	Immortality mode. Nothing can do you any harm
tmm 1	Makes all fast travel points on the map accessible
psb	Cheat code gives access to all shouts, talents and spells
killall	All playable characters near you die instantly
advlevel	Allows you to instantly increase your character's level by one in Skyrim
tfc	Activates the free camera mode, with which you can endlessly explore the game world
tdetect	The cheat code disables AI-controlled characters from noticing your theft of items
tcai	Completely disables artificial intelligence for all computer characters
set timescale to [value]	Allows you to control the passage of time, the more, the faster. Using zero will cause gameplay to stop completely
sexchange	Instantly changes the gender of your hero in Skyrim to the opposite
showracemenu	The cheat code enables the character editor, just like at the start of the game. This allows you to edit your appearance at any time, which is usually impossible
player.setlevel [value]	Sets your hero's current level. The number must be in the range from 1 to 255
player.setav invisibility 1 or 0	Enables or disables, respectively, the invisibility mode of the main character of Skyrim
player.modav carryweight [value]	Instantly increases your maximum carry weight by the specified amount.
player.setav speedmult [value]	Cheat code instantly changes your character's movement speed
player.setscale [value]	Allows you to change the height of the main character. One equals 100%: if you enter, for example, the number 3, you will become three times higher
setgs fJumpHeightMin [value]	Sets the jumping height for your character in Skyrim
player.setav [parameter] [value]	Makes the selected main character's stat equal to the specified number. Available parameter options: health (health), magicka (mana), stamina (stamina)
player.setav attackdamagemult [value]	Cheat code changes the damage of all your weapons by a selected number of times
player.setav leftweaponspeedmult [value]	Changes the attack speed of the weapon in the hero's left hand by the specified number of times
player.setav weaponspeedmult [value]	Changes the attack speed of the weapon in the character's right hand by the selected number of times
player.additem 0000000F [value]	Allows you to get a specified amount of gold in Skyrim
player.additem 0000000A [value]	The cheat code gives your character the selected number of lockpicks
player.setcrimegold 0	Allows you to reset the bounty on your head, if there is one.
player.moveto	Instantly teleports you to the selected in-game character
coc qasmoke	Moves your character to a location in Skyrim intended for testing
coc	Cheat code for teleporting to a specified location. For example, coc riverwood will take you to Riverwood
player.setpos	Teleport to a specific point in the Skyrim game world corresponding to the specified coordinates
player.getpos [coordinates]	Allows you to get the coordinates of the position where your character is currently located
player.removeallitems	Completely clears your inventory, removing all items in it.
kill	Cheat code for instant death of the character or creature currently selected by the cursor
resurrect	Allows you to resurrect an NPC whose corpse is hovered over
resetai	Clears the memory of the character currently selected by the cursor in Skyrim. will make him forget everything you talked to him about before
openactorcontainer	Shows the inventory of the target the cursor is hovering over
removeallitems	The cheat code will completely clear the inverter of the target you specified.
equipitem	Allows you to give the character the cursor is hovering over any item
duplicate allitems player	Your character's inventory in Skyrim will become a complete copy of the selected target's inventory
resetinventory	Resets the selected NPC's property to its original state
setownership	The cheat code will make the item you selected with your cursor your property
unlock	Allows you to open any lock without master keys or anything else. Select with the cursor
markfordelete	Instantly deletes the selected item, character or creature in Skyrim
showquesttargets	Displays the ID of the job you are currently running
getstage	The cheat code shows what stage the player is at in the specified task
sqs	Displays information about the selected task, including all its stages
setstage [stage]	Moves to the specified stage of the selected task
movetoqt	Instantly transports you to the quest completion point in Skyrim
resetquest	The cheat code resets the specified task, so you can complete it again
player.modav dragonsouls [value]	Adds the specified number of dragon souls to your character in Skyrim
player.setav shoutrecoverymult [value]	Sets a cooldown for screams. Use a value of 0 to completely remove cooldown

Other cheat codes for The Elder Scrolls 5: Skyrim

The possibilities for cheating in this game are not limited to the above list of commands. We bring to your attention several more sets of cheat codes and other options for gaining advantages in the game Skyrim.

Character Skills and Dragon Shouts

Do you want to improve your hero's handling of weapons, wearing armor, and similar skills? The game has special cheat codes for this. In addition to skills, you can also unlock any dragon screams. .

Cheat codes for weapons, armor and items

Skyrim offers its players an incredible number of unique sets and individual weapons, armor, artifacts, various potions and more. All this can be easily obtained with cheat codes. .

Enchanting to get bonuses

If regular weapons and armor are no longer enough for you, you can give them additional effects. Cheat codes allow you to get both a buff to a character’s skills and direct harm to the enemy, such as damage and control. .

Summoning objects near the character

Among other things, Skyrim has many different gadgets, chests, bags, safes and other things that can be useful. They can be summoned next to the hero using cheat codes. .

More information about the game Skyrim

The Elder Scrolls series is one of the most ancient and significant in the history of the role-playing genre. In 2011, Bethesda Softworks released the fifth part of the series, called Skyrim, which won many awards and received high praise from critics. This is a natural role-playing game that can be hacked in every possible way with cheat codes. There are plenty of opportunities to play a role here: you can live like a hero, saving the universe from mortal danger, or engage in theft and murder, or you can buy a house and set up your own farm.

The developers managed to revive Skyrim so much that you begin to believe in the reality of what is happening after just a couple of hours, until you start using cheat codes on it. The components of such success are high-quality graphics, mesmerizing sound, Scandinavian flavor combined with a huge, detailed world, as well as a carefully written story, interesting tasks and complete freedom, including in the use of cheat codes.

Plot and freedom

Events take place 200 years after the history of Oblivion, in the northern province of Tamriel - Skyrim. Over the years, a lot has happened in the Empire: the Elven War, the loss of power, and, as a consequence, the refusal of the provinces to obey, for which it is time to punish them with cheat codes. In Skyrim, not only is there a planned rebellion of the northern tribes and a civil war is in full swing, but dragons have also appeared. The main character will have to kill the all-destructive Alduin, which can be done with cheat codes to stop the return of dragons to our world.

Skyrim lives without your intervention: townspeople skillfully imitate life, fortresses are attacked, dragons terrorize the area. The game's location is not very large, although it can surpass almost all modern RPGs in detail, and it is more than interesting to cause chaos here with cheat codes. It does not have the same type of territories or copied dungeons, so wandering through the expanses of Skyrim in search of the next cave and admiring the breathtakingly beautiful nature is pleasant and interesting.

While running away from a giant that you didn’t want to kill with cheat codes, and getting into the wilderness, you can accidentally overhear local residents talking about their problem and take on the solution. Skyrim uses the Radiant Quest system, which will help you adjust the storyline or generate new tasks. The abundance of guilds and variety of assignments keep the player busy for dozens of hours, let alone cheat codes.

Graphics and sound

The game is powered by the Creation Engine, which delivers immersive visuals without requiring a high-end system. After the release of the re-release of Skyrim Special Edition, the picture looks attractive even today, if you suddenly want to return to the game with cheat codes at the ready. Suffice it to say about the soundtracks of The Elder Scrolls series that they are great to listen to on their own.

Role-playing and combat system

First, as usual in the TES series, in Skyrim you need to create a character, customize your appearance and select initial attributes. If something happens, with the help of cheat codes the unsuccessful choice can be corrected in the future. The role-playing component migrated from previous games in the series (skills are upgraded as you use them), improved by adding perks. Now, in addition to increasing parameters, in Skyrim you can obtain certain skills, both honestly and with cheat codes.

The combat has undergone positive changes, in contrast to the terrible combat systems of previous projects. In Skyrim, it has become possible to use both hands during combat, spells and weapons can be assigned and changed as you please, especially if you get a larger arsenal with cheat codes. Here you can take a good sword in one hand, equip the other with healing magic, and rush into a bunch of enemies. Thanks to this, battles in Skyrim are fast and spectacular, and the use of a bow or magic no longer causes hellish torment and suffering for the player. Dragon cries and assistants also appeared, also obtained through cheat codes, which introduced a certain tactical element.

The authors recreated in Skyrim everything that they previously loved Morrowind for. I want to return here despite the inhospitable climate and rude settlers, not the best animations and not very user-friendly interface, fortunately there are plenty of cheat codes. The enchanting atmosphere coupled with wonderful melodies, some of which were transferred from TES III, is what Bethesda truly captivated the players. Fans of the genre and ordinary gamers are not recommended to skip the game.