What are console commands for?
Primarily to get things.
Or just have fun.
Main list of cheat codes.
To open the console, press [~] (tilde) and enter the following cheat codes:
tgm - invulnerability mode
tcl - walk through walls
tmm 1 - open the world map (all points on the map)
killall - kill everyone (friends/enemies) in sight
psb - get all spells, dragon shouts and talents
qqq - exit the game
advlevel - raise the level. Does not add ability points.
tfc - "free" camera mode
tdetect - theft without consequences. Disable NPC's vision. (added by Robin)
tcai - disables and enables artificial intelligence. After casting, everyone stops fighting. (added by Robin)
set timescale to 0 - stop time. Default: 20. If you enter 10000 instead of 0, then one day will pass in a few seconds.
SexChange - change gender to the opposite. The face will not change :)
Showracemenu - open the character creation window, where you can change: the race, gender, appearance and name of the character. After changing your race, in early versions of the game, your character's level will become 1. This will also reset all your upgraded skills. In game version 1.3.10.0, after changing the race, the character level remains the same. Be sure to save your game before using this command command. (added by Robin)
player.setav invisibility 1 - enable invisibility. After this, neither enemies nor friends will notice you. To disable invisibility, enter 0 instead of 1.
player.modav carryweight X - increase the character's maximum carrying capacity by X units
player.setav speedmult X - set the movement speed to X%. Used after running with the key held down. Default: 100%.
player.setscale X - increase the height of your character, where X: 1 - 100%, 2 -200%, etc.
setgs fJumpHeightMin 100 - jump height 100% (default).
player.setav Stamina X - set max. amount of strength reserve in X units. If you set the value to a high value, the character will not get tired while running.
player.setav attackdamagemult N - increase weapon damage N times (added by Avenger)
player.setav leftweaponspeedmult N - increase the attack speed of a weapon in your left hand by N times
player.setav weaponspeedmult N - increase the attack speed of weapons in the right hand and two-handed weapons by N times
player.setav LeftitemCharge N - charge the weapon in your left hand by N units.
player.setav RightitemCharge N - charge the weapon in the right hand by N units.
Notes:
All two-handed weapons are considered off-handed;
a fully loaded weapon has a charge level of about 3000;
Each attack consumes about 30 units. weapon charge;
The charge level can be set to more than 3000.
player.additem 0000000F N - get N gold
player.additem 0000000A N - get N master keys
player.placeatme 0010BF90 - Summon the Spectral Horse. Can be used indoors. (added by Sam)
player.setcrimegold 0 - cancel the bounty on your head
player.addspell 00092C48 - Lycanthropy. Skill for turning into a wolf/werewolf. Appears in the "Talents" section. To activate, use the [Z] key. The skill cannot be cancelled. The transformation back into a human will occur automatically, after a certain period of time.
Vampirism.
Player.addspell 000B8780 - vampirism. Adds the disease "Sanguinare Vampiris". 3 days after infection, you have a 10% chance of becoming a vampire. If, 3 days after using this code, “Vulnerability to Fire” appears in the “Magic” -- “Active Effects” section, you are a vampire. And if nothing works, use the command player.removespell 000B8780, and then again player.addspell 000B8780.
player.removespell 000B8780 - will be cured of vampirism, the disease “Sanguinare Vampiris”, which appears at the first stage of transformation (after the bite). This code has no effect after turning into a vampire.
setstage 000EAFD5 10 - cure from vampirism. Always heals, but only works 1 time, since the healing occurs after completing the quest (this code ends the quest). (added 216623)
If you become a vampire for the second time and the setstage code does not cure:
Save the game (new save, not quick save);
enter resetquest 000EAFD5
create another new save and load it;
enter setstage 000EAFD5 10
Teleportation.
Player.moveto (without brackets) - teleport to the specified object (character)
coc qasmoke - will move to the test location. Here you will find all the game items and tools for making any items. (added by Robin)
coc riverwood - leave the test location, move to “Riverwood”. If you enter another name instead of “riverwood”, a teleport will occur to the specified location. Read below to find out the names of teleportation locations. (added by Robin)
player.setpos [axis] [number] (without brackets) - move your character to the specified coordinates. Instead of axis, you must specify x,y or z. And instead of a number - the offset along the selected axis.
Notes for player.setpos [axis] [number] (no parentheses)
To find out your current location, type player.getpos [axis] (without parentheses). This command must be executed 3 times and instead of axis, write x, y and z in turn. Then write down/remember all three numbers received.
If you know the exact coordinates to move, obtained previously using the player.getpos [axis] command (without parentheses), then use the player.setpos [axis] [number] command (without parentheses) to move to the specified coordinates.
Do not close the console until you have used the command player.setpos [axis] [number] (without parentheses) 3 times for each of the coordinates (x,y,z).
Moving occurs only after closing the console
How to find out the names of locations for the coc command.
There are a lot of different locations in the game and I won’t post the exact commands for teleportation, but I’ll tell you how to find them out. And so, what needs to be done to find out the very names of the locations for the coc command:
Open the console
enter help part_of_name_in_English 0 When entering the name of the location, there should be no spaces, and if there are, enter only the first word.
using the console scroll keys and find the following lines (there are many of them):
CELL: location_name (location id) (all this can be entered for the coc command)
now that we already know the exact name for teleportation to the required location, enter coc location_name
player.removeallitems - clear inventory. Removes ALL items in your inventory.
prid (without brackets) - select an object by its ID. I do something similar to the following: open the console - click on the object. After this command, the console should display the message “” (object ID). After which you can apply all the cheats written below without selecting the object. Using this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of your inventory
Skyrim codes (cheats) for selected objects.
In order for the following codes to work, you must approach the creature (animal or character) or the required object from the front, open the console and click on it with the mouse, and the inscription “” (object_ID) should appear in the console. Then enter these cheats:
Stopcombat - stop combat with the specified friendly character.
Before using this command apply player.setcrimegold 0
If there are several enemy NPCs near you, then to stop the battle you need to apply this cheat for all of them at once, without closing the console.
If at least one NPC attacks you (you did not apply this code to him), then all the others will begin to attack.
If all else fails, take the attackers out of the city (it is recommended to turn on the tgm invulnerability mode before doing this) - use the tcai command (so that everyone freezes and has nowhere to move) - take a comfortable position (so that everyone is in sight) - without closing the console Apply the stopcombat command to everyone in turn. After the commands have been applied to all characters, enter tcai and tgm again (if these modes were enabled).
All characters hostile to you are shown as red dots on the compass at the top, and until these dots disappear they will attack you.
This command does not work on permanent enemies (monsters and story NPCs), those who always attack you.
kill - kill the selected character/animal
resurrect 1 - resurrect
resetai - restore default dialogues - erase the memory of the selected NPC. This command should only be used if you have killed someone, resurrected them, and after that they refuse to talk to you.
openactorcontainer 1 - open the inventory of the selected creature. You can exchange items.
removeallitems - clears the specified character's inventory.
equipitem Item ID - equip the selected character with the specified item (see item IDs below). With this cheat you can dress any character, give him a weapon and put armor on him.
inv - show the inventory contents (list) of the selected object.
duplicateallitems player - copy all items from the inventory of the specified NPC or object to your inventory.
resetinventory - reset inventory contents. Dress the selected character in the default, initial equipment.
setownership - obtain ownership rights to a specified item. (added by Robin)
unlock - open the lock of the specified object.
disable - hide the specified object.
Notes:
If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time; it is enough to select it only once (the selection is saved).
All object IDs you created using the player.placeatme command start with FF...
Controlling other NPCs.
With these cheats you can gain control over any monster or character. Do everything strictly in the specified sequence.
Switch to “third person view” [F] (it won’t work any other way);
we approach the required character or monster;
open the console, click on it with the mouse and enter the following code;
TFC
player.TC
TC
TFC
close the console.
To return to the normal game and gain control of your main character, enter in the console: TC and player.TC
Notes:
After gaining control of an NPC, you will only be able to move with it and will not be able to attack.
If you press attack, your main character will attack, and not the one you control.
How to force NPCs to attack is unknown. If you find a solution to this problem, write in the comments.
Companions (partners).
In Skyrim, almost any character can be made your partner or companion. To do this, do the following:
Approach the required character;
open the console and click on it (highlight);
enter setrelationshiprank player 3
enter addfac 0005C84D 1
After which this character will have a dialogue: “Follow me. I need your help."
set playerfollowercount to 0 - adds dialogue for taking new partners. After entering this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, no companions, then this command is useless. The maximum number of partners is 1. There is no point in entering something else instead of 0 - it will not give any effect.
Strengthening skills.
All of the codes below enhance a particular skill by (base value * N%). That is, if your base weapon damage is 15 units, and you entered 200 as the value, then the base damage will be (15 + 15 * 2) = 45 units. To disable the modifier, enter 0 as a value. The exact same formula is used to calculate the duration of spells.
Example: player.setav DestructionPowerMod 100 - increase the damage from all spells of the school of destruction by 100%
OneHandedPowerMod - one-handed weapon
TwoHandedPowerMod - two-handed weapon
MarksmanPowerMod - bows
BlockPowerMod - shield
SmithingPowerMod - blacksmithing
HeavyArmorPowerMod - heavy armor
LightArmorPowerMod - light armor
PickPocketPowerMod - pickpocket
LockpickingPowerMod - hack
SneakPowerMod - stealth
AlchemyPowerMod - alchemy
SpeechcraftPowerMod - eloquence
AlterationPowerMod - change
ConjurationPowerMod - witchcraft
DestructionPowerMod - destruction
IllusionPowerMod - illusion
RestorationPowerMod - restoration
EnchantingPowerMod - enchantment
Note. Changes to these modifiers are reflected in the descriptions of spells and weapons.
Remove squares when entering cheat codes.
Go to the game folder and find the following file: Skyrim\Data\Interface\fontconfig.txt. Replace the following line:
map "$ConsoleFont" = "Arial" Normal
map "$ConsoleFont" = "FuturaTCYLigCon" Normal
Note 1: If after this the fontconfig.txt file does not want to be saved or suggests saving a copy of this file, then do the following:
In the properties of this file, look to see if the “Read Only” checkbox is checked;
if it is, remove it, change the file, save it and put this checkbox back.
Note 2. If for some reason you are unable to remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. However, before entering the codes, it is imperative to change the language in the console to English (instructions below).
Set the language to English in the console.
Method 1 - setting English as the default language in the OS (instructions).
Method 2 - Changing Game Files
Go to C:\Users\<имя_пользователя>\Documents\My Games\Skyrim and open the Skyrim.ini file. After the lines:
sLanguage=RUSSIAN
add (not replace) the following line
During the game, press the + key combination. Right-click on your nickname, click change language and select EN.
This method will only work if you have the Steam version of the game.
After these steps, the language in the Skyrim console will be English instead of Russian.
Note 1. To set the English language in the console, you must follow the instructions described in one of the three methods presented.
Note 2: To set the English language in the console, use “Method 1”, as it works for 90% of all players with the original version of the game. If you do not have the original version of the game or the first method did not change the language in the console, provided that you did everything correctly, try the other methods described here.
I repeat once again, “Method 1” almost always works if everything is in order with the game itself. If it does not work and you do not own the original version of the game, then you should think about finding another image with the game or purchasing the original version.
Upgrading all skills and perks.
Using these cheat codes for Skyrim, you can quickly upgrade all your skills and get all the perks. To do this we will need the following cheats:
Advskill N X - increase skill N by X experience points. The main team for leveling up all skills and perks.
player.setav N X - set X skill level N. This cheat does not add “ability points”, but is necessary when your skill level reaches 100.
player.setlevel N - set character level N (1-255). Can be used to lower a character's level after using the advskill cheat.
List of names of all skills for advskill and player.setav commands
Usage example:
advskill Destruction 100 - raise “Destruction” by 100 experience (not levels)
player.setav Block 50 - set the Block skill level to 50
Alchemy - alchemy
Alteration - change
Conjuration - witchcraft
Destruction - destruction
Enchanting - enchantment
Illusion - illusion
Restoration - restoration
Marksman - shooting
Block - block
HeavyArmor - heavy armor
LightArmor - light armor
Lockpicking - hack
Onehanded - one-handed weapon
Twohanded - two-handed weapon
Pickpocket - pick pocketing
Smithing - blacksmithing
Sneak - stealth
Speechcraft - eloquence
To upgrade all the perks of all skills, do the following (added by dova):
Using the advskill cheat (description above) we raise any skill to level 100.
Then we use the code player.setav [skill name] 0 (without brackets) - set the level of the specified skill to 0.
Repeat points 1 and 2 until you have upgraded all the perks.
If after this you still don’t understand how to add “ability points” to level up perks, then enter this several times (one at a time):
advskill Destruction 999999
player.setav Destruction 0
After these manipulations, you will receive the required number of “ability points” and can spend them on upgrading all the perks available in Skyrim.
Quickly upgrade all perks in Skyrim and raise all skills to 100.
To raise the level of your main character, enter: player.setlevel 50 - set the level of the main character to 50. Instead of 50, you can enter any number.
To change the amount of magic, lives and stamina, use the following cheats:
Player.setav Health X - set max. number of lives in X units
player.setav Magicka X - set max. amount of magic in X units
player.setav Stamina X - set max. quantity of stock in X units.
Armor sets (sets).
To get the required armor set, enter the cheat codes as follows:
player.additem [armor_code] [quantity] (without parentheses).
Example: player.additem 00013938 1 - get 1 glass boots
0001396B - armor
0001396A - boots
000D7A8C - fire suppression boots - +50% fire resistance.
000D7A8B - boots of silence - Silent movement.
000D7A8A - mammoth boots - +50 units. load capacity.
0001396D - helmet
0001396C - gloves
0001396E - shield
000D7AF9 - grounding shield - +70% electrical resistance.
000D7AF6 - heat shield - +70% cold resistance.
0010DFA3 - denial shield - +22% magic resistance.
Dragon Shell Armor Set
00013965 - boots
00013966 - armor
00013967 - gloves
00013969 - helmet
00013968 - shield
Dragonscale Armor Set
0001393D - boots
0001393E - armor
0001393F - gloves
00013940 - helmet
00013941 - shield
0007C932 - “Archmage’s Robe” (armor) - +100% to the speed of magic recovery; all spells cost 15% less magicka
000F9904 - “Scientist's Diadem” (helmet) - All spells consume less magic.
000FC5BF - “Tarch of Bloodlust” (shield) - A blow with a shield deals 3 units. damage over 5 sec.
000E41D8 - “Shield of Ysgramor” - +20% magic resistance; +20 units health.
000295F3 - “Ingol’s Helmet” - +30% cold resistance.
Accessories with bonuses
000С8911 - “Akatosh’s Amulet” - +25% to the speed of magic recovery
0002D773 - “Amulet of Gauldur” - +30 units. magic, health and stamina. (added by FANTOM)
00100E65 - “Necklace of immunity and disease” - 100% immunity to disease (added by nikitadrakon)
000C891B - “Amulet of Mara” - Restoration spells consume 10% less magic. Essential for a wedding.
Masks (helmets) with bonuses
00061CB9 - “Krosis” - +20% to hacking, archery and alchemy skills
00061C8B - “Morokey” - +100% magic recovery speed
00061CA5 - “Nakrin” - spells from the school of destruction and restoration consume 20% less mana; +50 mana
00061CC9 - “Vokun” - spells from the school of illusion, change and witchcraft spend 20% less mana
00061CC2 - “Flock” - resistance to fire, electricity and cold increases
00061CC0 - “Ragot” - +70 stamina
00061CAB - “Volsung” - 20% discount on all products; breathing underwater; +70 load capacity
00061CC1 - “Hevnorak” - immunity to diseases and poisons
00061CCA - “Wooden mask” (added by dova)
00061CD6 - “Konarik” - When health is low, it gives a chance to heal the wearer and cause damage to nearby enemies. (added by dova)
Weapon sets.
To get the necessary weapons, enter cheat codes in the following form:
player.additem [weapon_code] [quantity] (without parentheses).
Example: player.additem 000139A8 1 - get 1 glass bow
000139B4 - ax
0001DDFB - inferno ax - +30 units. fire damage; sets the target on fire.
0001DFCB - thunderstorm ax - +30 units. electrical damage; takes away 15 units. of magic.
000139B5 - bow
0001DFEF - petrification bow - Chance to paralyze the target for 6 sec.
0001DFE6 - inferno bow - +30 units. fire damage; sets the target on fire.
0001DFE9 - winter bow - +30 units. cold damage; takes away 30 units. reserve of strength.
0001DFF2 - bow of thunder - +30 units. electrical damage; takes away 15 units. of magic.
0001DFFC - Sacred Bow - Undead level 40 and below flee for 30 sec.
000139B6 - dagger
000139B7 - two-handed sword
000139B8 - mace
000139B9 - sword
000139B3 - battle ax
000139BA - war hammer
000F1AC1 - “Dragon Scourge” - +40 units. damage to dragons and +10 units. Electric damage against everyone. (added by zalex2004)
000F5D2D - “Pale Blade” - +25 units. cold damage; subtract 50 stamina from the target; weaker creatures and people take flight for 30 seconds.
000956B5 - "Wuthrad" - Especially deadly against elves.
000B3DFA - "Chalk's Eye" - Fiery explosion deals 40 damage. damage within a 4.5 m radius and sets targets on fire.
000A4DCE - “Bloody Spike” - Fills the soul stone if the enemy dies within 3 sec.
00053379 - “Fierce” - +15 units. cold damage; takes away 15 units. the enemy's reserve of strength.
000F8317 - “Cooler” - +30 units. cold damage; Chance to paralyze the target for 2 seconds.
0001C4E6 - “Axe of Sorrow” - Takes away 20 units. the enemy's reserve of strength.
00035369 - “Staff of Magnus” - Absorbs 20 units. magic per second, if the enemy has no magic, it absorbs his health.
0010076D - “Staff of Hevnorak” - For 30 sec. deals 50 damage. damage per second from lightning. Apply to the surface.
000AB704 - “Holdir’s Staff” - Calms weak enemies for 60 sec. or captures their souls if they die.
000E5F43 - “Staff of Yurik Goldurson” - deals 25 damage. damage and takes away 50 units. of magic.
00094A2B - “Phantom Blade” - +3 units. additional damage, ignoring armor.
000AB703 - “Curse of the Red Eagle” - Sets undead level 13 and below on fire and causes them to flee for 30 sec.
0009FD50 - “Red Eagle’s Fury” - +5 units. fire damage and sets the target on fire.
000B994E - “Valdar’s Lucky Dagger” - +25% critical strike chance.
0006A093 - “Staff of Tandil” (staff) - Creatures and people of level 12 and below do not fight for 60 sec. (added by Robin)
Notes:
Additional damage from weapons was indicated for a first level character without upgraded skills.
All descriptions and names were taken from the game. "Yurik Goldurson's Staff" is what it is called in the game, not "Yurika". Perhaps this is a localization error.
Only the latest (most powerful) versions of weapons were added.
Daedric artifacts.
The Daedric Artifact IDs below must be used in the cheat code as follows:
Example: player.additem 000240D2 1 - get 1 dagger “Mehrunes’ Razor”
000240D2 - “Razor of Mehrunes” (dagger) - Chance to kill the enemy when dealing damage.
000233E3 - “Mace of Molag Bala” (mace) - Takes away 25 units. reserve of strength and magic. Fills a soul gem if an enemy dies within 3 seconds.
0004E4EE - “Radiance of Dawn” (sword) - +10 units. damage When killing undead, there is a chance of a fiery explosion that drives away or destroys nearby undead.
000EA29C - “Ebony Blade” (two-handed sword) - The target does not perceive a weapon attack as an attack.
0001C4E6 - “Axe of Sorrow” (two-handed axe) - Takes away 20 units. the enemy's reserve of strength.
0002ACD2 - “Volendrung” (two-handed hammer) - Takes away 50 units. reserve of strength.
0002AC6F - "Wabbajack" (staff) - Random effect with each use.
0001CB36 - “Rose of Sanguine” (staff) - Summons Dremora for 60 sec.
00035066 - “Skull of Corruption” (staff) - +20 units. damage Dreams collected from sleeping people increase damage to 50 units.
0002AC61 - “Skin of the Savior” (light armor) - +50% resistance to poisons and +15% magic.
00052794 - "Ebony Chainmail" (heavy armor) - You move more quietly, and enemies who get too close take 5 points of poison damage per second.
000D2846 - “Mask of Clavicus Vile” (heavy helmet) - +10 to eloquence. Magicka recovery speed +5%. Favorable prices +20%.
00045F96 - “Spell Breaker” (shield) - After blocking, absorbs up to 50 units. spell damage.
0002C37B - “Ring of Namira” - +50 units. reserve of strength. By devouring corpses, you increase your health level and recovery rate.
0002AC60 - “Ring of Hircine” - Additional transformation for werewolves.
0001A332 - “Ogma Infinum” (book) - After reading, you can get +5 to the following skills (only 1 of 3 lines is randomly selected):
Smithing, Blocking, Shooting, One-Handed, Two-Handed, Heavy Armor;
Lockpicking, Light Armor, Stealth, Pickpocketing, Speech, Alchemy;
Illusion, Conjuration, Destruction, Restoration, Enchantment, Alteration.
00063B27 - “Star of Azura” - Infinite soul stone.
00063B29 - “Black Star” - Soul Stone.
0003A070 - “Skeleton Key” - Infinite master key. A bug was discovered in early versions of the game. If the version of Skyrim is lower than 1.3.10.0, then to use the Skeleton Key you must have at least 1 regular master key in your inventory. After the first unsuccessful attempt to open the lock, all ordinary master keys disappear, but after that, to open a lock, you do not need ordinary master keys. This bug has been fixed in the latest version of the game.
Dragon screams are the most powerful spells in Skyrim.
Using the psb cheat code “get all spells, dragon cries and talents” or add only the necessary cries using the cheat:
player.teachword - learn a shout (list of all shout IDs below)
Example: player.teachword 20e17 - learn the first word of the Fire Breath shout
To learn word 3 of the dragon's cry, you must first learn 1 and 2, it won't work any other way. To study “Ice Form” level 3, you must enter the following:
player.teachword 602A3 - first word
player.teachword 602A4 - second
player.teachword 602A5 - third
Dragon shout IDs for player.teachword code (without parentheses)
first word / second / third - name of the cry (use only 1 of 3)
46B89 / 46B8A / 46B8B - Call of the Dragon
13E22 / 13E23 / 13E24 - Ruthless Force
602A3 / 602A4 / 602A5 - Ice form
6029A / 6029B / 6029C - Storm Call
20E17 / 20E18 / 20E19 - Fire Breath
48ACA / 48ACB / 48ACC - Time dilation
2F7BB / 2F7BC / 2F7BD - Swift Charge
60291 / 60292 / 60293 - Friendship with animals
3291D / 3291E / 3291F - Elemental Fury
32917 / 32918 / 32919 - Ethereality
5D16C / 5D16D / 5D16E - Frost Breath
602A0 / 602A1 / 602A2 - Voice cast
5FB95 / 5FB96 / 5FB97 - Disarmament
3CD31 / 3DC32 / 3CD33 - Clear Sky
51960 / 51961 / 51962 - Call of Valor
44251 / 44252 / 44253 - Dragon Slayer
60297 / 60298 / 60299 - Death sentence
60294 / 60295 / 60296 - Whisper of aura
6029D / 6029E / 6029F - Kin World
3291A / 3291B / 3291C - Fright
Dawnguard DLC Shouts.
02008A65 / 02008A64 / 02008A63 - Drain life
020030D4 / 020030D6 / 020030D7 - Calling Durnevir
02007CB7 / 02007CB8 / 02007CB9 - Soul Rip
0201A162 / 0201A163 / 0201A164 - Call from the Cairn of Souls
Screams DLC Dragonborn.
040200E4 / 040200E5 / 040200E6 - Battle Fury
040179D9 / 040179DA / 040179DB - Submission of the will
040200C2 / 040200C3 / 040200C4 - Cyclone
0401DF93 / 0401DF94 / 0401DF95 - Dragon Incarnate
To use dragon screams, you first need to activate them using the Souls of Dragons. That is, kill the dragon or add the required amount using the cheat:
player.modav dragonsouls N - get N dragon souls. This cheat sets the total number of dragon souls absorbed, rather than adding N pieces.
To activate dragon screams, press -- Magic -- Shouts -- select the required scream that you want to activate -- press [R] -- Ok. Now you can use this shout.
player.setav shoutrecoverymult 0 - dragon shouts have no cooldown or cooldown for reuse. If you entered this code after using a shout, you will need to wait until it is restored, after which you can use this shout all the time without waiting for it to be restored.
Ingredients, Soul Stones, Potions, Arrows.
To get the required item, the IDs of which are below, you must use the cheat code in the following form:
player.additem [amount] (without parentheses).
Example: player.additem 00039BE5 10 - get 10 potions of full health restoration
00039BE5 - fully restores health
00039BE7 - fully restores magic
00039CF3 - fully restores strength
00073F34 - “Deadly poison” - 65 units. poison damage
00039D12 - "Enchanter's Elixir"
00039967 - “Blacksmith’s Elixir”
Soul stones
0002E4F4 - large (empty)
0002E4FB - big (Large)
0002E4FC - great (empty)
0002E4FF - great (Great)
0002E500 - black (blank)
0002E504 - black (Great)
00063B27 - Star of Azura (empty)
00063B29 - Azura's Black Star (empty)
00038341 - Falmer
00034182 - ancient Nordic
000236DD - dart (can only be obtained after completing the main storyline)
00020F02 - rusty iron
00020DDF - iron
000139C0 - Daedric
000139BF - ebonite
000139BE - glass
000139BD - elven
000139BC - Dwemer
000139BB - orcish
0001397F - steel
Treasure chests.
Each chest contains all the items of its class. For example, a chest with staves contains ALL staves, and a chest with ingredients contains ALL ingredients. To get these treasure chests use the following cheat codes for Skyrim:
player.placeatme (no parentheses)
Example: player.placeatme 000C2CDE - get a chest with all the staves
000C2CDF - enchanted weapon
000C2CD7 - enchanted armor, jewelry, clothing for a mage and robber
000C2CE0 - standard weapon
000C2CD6 - standard armor
000C2CDE - staves
000C2CD8 - armor and jewelry, clothing for a mage and robber
0010D9FF - skill books
000C2CD9 - spell books
000C2D3B - regular books
000C2CD4 - arrows
000C2CDA - ingredients
000C2CDB - keys
000C2CE1 - scrolls with spells
000C2CE2 - potions, elixirs and tinctures
Notes:
After opening some chests (with enchanted weapons and armor), Skyrim freezes for 30-60 seconds. (depending on the power of your CPU). Wait a while and everything will be fine.
If, after opening a chest with enchanted weapons/armor, you press [R] instead of just one item (take all), then the duration of the freeze will be reduced several times.
Chests contain all the things of their class - there are a lot of things.
Each chest contains only 1 copy of each item. If you want to make a lot of such items (ingredients), find out the ID of the item (read how to do this below) and create the required amount of these things using the cheat player.additem ID quantity
Passing quests.
To complete quests in Skyrim we will need the following cheat codes:
Showquesttargets - shows the ID of the active quest
getstage (without parentheses) - shows the stage of completion of the specified quest (the resulting number is not % completed).
setstage [stage] (without brackets) - set the execution stage
movetoqt (without parentheses) - teleportation to the key point (the last unfinished stage) of the specified task. (added by Robin)
sqs (without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in the setstage cheat.
resetquest (without parentheses) - reset all stages of the quest, after which it can be completed again. In order for this quest to be deleted from the Quest Log, you must save and load the game.
player.completequest (without parentheses) - complete the quest. This command is not recommended, as you will not be able to receive the next quest if it is a quest chain. Use only if you want to complete the quest without the possibility of further progress.
And so, we already know all the necessary console commands to successfully complete quests in Skyrim, but we don’t know what to enter and why. Since we will perform all actions in the console, I would like to remind you that to scroll text in the console you must use the and keys. The method written below describes how to move from one stage of the quest to another.
Save your game and do not overwrite this save until you complete the quest.
Open your quest list ([J] key)
Select the required quest that you want to complete and make it active - click .
Open the console and enter showquesttargets - we get the quest ID.
In the resulting list, look for Current quest: Quest ID - remember/write down this ID.
Now we enter movetoqt quest ID and try to complete the quest in the usual way, without the console, and if nothing works, read on.
We enter the quest ID in the getstage console. After that, the stage of this quest will appear in the console in the following form: GetStage >> [number].00 -- remember/write down this number. Now we need to find out which stage of the quest comes after this, obtained using the getstage command .
We enter sqs (without parentheses) in the console - we get a list of all stages of the specified quest (they are different for each quest) in the following form Stage [stage]: 1 (or 0). 1 - indicates that this stage has already been completed, and 0 - not yet.
In the resulting list, we look for our quest stage, obtained using the getstage command, and look at which stage comes after it - remember / write down the number. For example, if using getstage you received GetStage >> 400.00, and in the list obtained using the sqs code, after the line Stage 400: 1 there is a line Stage 450: 0 - remember/write down the number 450.
Enter setstage [stage] (without brackets) in the console - set the stage of the quest. As a stage, enter the number obtained in the previous paragraph (for us it is 450), and as the quest ID - the ID obtained using the showquesttargets cheat.
Enter movetoqt (without parentheses) - teleportation to the target of the active task.
We continue to go through the next stage of the quest.
Notes:
If nothing worked the first time, repeat steps 9 and 10 several times, but change the stage - enter the next one in the list obtained using the sqs command (without parentheses).
If you repeat steps 9 and 10, while changing the quest stage (all in turn) from the one received using the sqs command (without brackets) to the last one in the sqs list (without brackets), then you will complete all stages of this quest and will move from one key points to another. Movement will not always occur. This is how you can complete any quest 100%.
It is not necessary to move on to the next stage of the quest, you can go straight to the last one, but in this case you may not get the next quest, since you will not have an active quest or a point for teleportation with the movetoqt command - you will not know where to get it ( next quest).
If you go straight to the last stage, you may not receive all the rewards for this quest (not tested).
You cannot activate the previous stage of the quest (I didn’t succeed).
How to find out the name of a quest by its ID.
Method 1 is the fastest, but may not work if you have any mods or unofficial add-ons installed.
Go to this page and enter the name of the quest in the appropriate search form.
Method 2 is slow, but it always works with any version of the game.
If, after entering the showquesttargets command, you receive several lines Current quest: Quest ID and you do not know which of these IDs corresponds to a particular quest, do the following:
Enter help in the console quest ID 4
in the resulting list, look for the line QUST: Quest_ID (some ID) "Quest name"
repeat steps 1 and 2 until you find the quest you need by its name.
Quest IDs, after introducing showquesttargets, are located in exactly the same sequence as in the “Quest Log”. That is, if in the “Quest Log” at the very top of the list you have the quest “Skyrim is restless”, and after it comes “Cleaning”, then they will be in exactly the same sequence after entering the showquesttargets command. This will help make searching through all quest IDs even faster, since you will approximately know which ID to start searching for the task you need.
How to find out the item ID.
If you have some unique item and you want to make a lot of such items (clone) or want to “send” this item to your friend, but don’t know how to do it. To do this, we need to know the ID of this item.
Method 1
In the console we enter: player.showinventory
Note. This method always works, but if you have too many items in your inventory, you may have difficulty finding the item you need. In such cases, use the second method.
Method 2 (added by Avenger)
Place the item whose ID you need to find out in an empty box (barrel, chest, bag or something else). We come as close as possible to the box (it is advisable to sit down) - open the console - click on the box (in which our item lies) and enter the command inv.
Notes:
This method may not always work, since when you click on a box with an item, the box itself is not always highlighted; very often something unclear is highlighted.
If you cannot find out the item ID using this method, use the first method.
Using this method, you can see a list of all the items of another character. To do this, instead of clicking on the box, click on the required character.
After this, a list of all items in your inventory or box (if you entered the inv command) will appear in the following form:
quantity - name (item ID)
To scroll through text in the console, if there is a lot of it, use the and keys.
We look for the required item by name and look at the item ID
Now, to make a lot of such items (clone), enter the following code:
player.additem [amount] (without parentheses)
Housing.
Many of you have your own home or a place where you like to spend time, but when you need to create some thing (armor, weapons), improve something or create a new elixir, you have to look for a special device to create it, since without no way. Using these codes for Skyrim, you can create your own workplace, install all the devices you need, anywhere and anytime. To install all these crafting stations, use the following code for Skyrim:
player.placeatme (without brackets) - place item
Example: player.placeatme 000BBCF1 - install the sky forge
000BAD0D - pentagram of souls (large)
000D5501 - pentagram of souls (small)
000BAD0C - alchemical laboratory (large)
000D54FF - alchemical laboratory (small)
000727A1 - tanning machine for leather processing
0006E9C2 - whetstone
000BF9E1 - forge (large)
000BBCF1 - sky forge (very large)
0001A2AD - anvil
0009C6CE - smelter
000D932F - workbench
Furniture for home
00089A85 - mannequin
Single door: CC16A, CC163
CC164 - double door
Decorative items
B2456 - dragon head
3FA65 - moose antlers
D9285 - crab
D9276 - goat head
3858F - fish
moose head: DD9E0, DD9E1, CF264
big cat head: D928F, D928D
wolf head: D9289, D9288
head of some beast: D9287, D927D
bear head: D8282, D9281, D927F
Carpets (square): 93D39, 93D3B, 93D3D, 93D3F, 93D41, 93D43, 93D45, 93D47, B7E3E, B7E40, BF9CF, BF9D1, BF9D3, BF9D5
carpets (round): 95498, 954A3, 954A4, 954A5
animal skins: 5C015, 5C016, 5C017
7EA42 - wall burning candles
1F24A - table candle
5AD5B - ceiling lamp
77761 - light source (invisible, cannot be selected/moved/deleted after installation) for illuminating dark rooms. To install multiple light sources at the same time, use player.placeatme 77761 N - install N light sources. Instead of N, write any number from 1 to 10. If you write more than 10, nothing will happen.
blue light source: FFF46, FFF48
Notes:
When created, all items appear in front of you.
To set the item “straight”, before introducing the cheat, center your gaze so that your character is looking straight, and not down or up.
activate (without brackets) - activate the specified item. Analogous to the [E] key. Applies to mannequins (dress) and bookshelves (close/open).
For the following commands to work, you must first select the object - open the console and click on the object. After this, the inscription “” (object ID) should appear in the middle of the console screen. All objects you create have an ID starting with FF000..., so be careful what you select.
Codes for mannequin
Tai - enable/disable artificial intelligence of the selected character (mannequin). The character (mannequin) will freeze and will not move.
OpenActorContainer 1 - open the mannequin's inventory.
ResetReference - clear the inventory (delete all items) of the mannequin/NPC and set the initial stance. It is recommended that you apply tai to this object before using this command.
Cheats for all objects in Skyrim
Getpos [axis] (without brackets) - get the current coordinates of the selected object. Instead of [axis], you must specify x,y or z.
Setpos [axis] [number] (without brackets) - set coordinates for an object.
Getangle [axis] (without brackets) - get the rotation angle relative to the specified coordinate axis.
Setangle [axis] [number] (without brackets) - set the rotation angle for the specified object
Setscale [number] (without brackets) - set the scale of the specified object. 1- 100%, 2- 200%, etc. Default: 1 - 100%.
moveto player - move an object towards you.
Disable - hide the specified objects.
enable - show an object that was hidden using the disable cheat.
markfordelete - delete the selected object or character. Attention! Using this code, you can delete not only a chest, but also invisible objects that can be selected with the mouse and that are necessary for the normal functioning of the game. Be careful when using this command. Objects you create are deleted immediately, while others are deleted after saving and loading the game. There is no reverse command. It is not recommended to use this command as you may remove a wall, a floor, or an entire building. To remove items, it is recommended to use the disable command, as it only hides the item and does not delete the object.
Notes:
To apply several commands to the same object, you do not need to select it again each time; the selection is saved.
Using the Setpos and Getangle commands, you can move and rotate an object only visually; physically it remains in the place where it was originally created, that is, after entering the placeatme command. If an item is moved too far from its original location, you will be able to walk through it and will not be able to interact with it.
To set an object exactly, level it, enter:
Setangle x 0
Setangle y 0
To rotate an object, use Setangle z [number] (without brackets).
To ensure that these changes are applied after the commands for moving (Setpos) and rotating an object (Setangle), enter Setscale 1. When moving and rotating, some objects have this bug.
So that after the rotation (Setangle) and movement (Setpos) commands, the object moves not only visually, but also physically, enter disable and enable in the console. After this, the selected object will move physically and it will not be possible to pass through it.
Enchanting (improving) weapons and armor.
Using these cheat codes for Skyrim, you can enchant (improve) any weapon, armor or jewelry. Before you begin the improvement process, you need to know the following:
You can only improve an item that does not have any improvements;
each item can have no more than 2 enchantments;
the quality (power) of enchantment depends on the Enchantment skill;
before enchanting, it is recommended to level up the “Enchantment” skill to 100 along with its perks (read how to do this in the section “Upgrading all skills and perks”);
after entering the code for enchantment (improvement), the specified item will appear in your inventory, that is, a new item will be added, and the item in the inventory will not be improved;
after enchanting (improving) a weapon, it will have a very small charge (170-350);
To increase the charge, equip the necessary weapon, the charge of which you want to increase, and apply the following cheat codes:
player.setav LeftitemCharge N - charge the weapon in your left hand with N charges
player.setav RightitemCharge N - charge the weapon in the right hand with N charges
You can find a list of IDs of all items here.
PlayerEnchantObject Item ID ID_enchant_1 ID_enchant_2 - receive an item with the specified enchantments (improvements). The ID of the second enchantment is not required.
Example: PlayerEnchantObject 000136D5 000493AA 0007A0F8 - get “Imperial armor” (000136D5) with enchantments to increase the number of lives (000493AA) and the speed of their regeneration (0007A0F8).
Skill Enhancement
0008B65C - alchemy
0007A0FE - shooting
0007A104 - trade
0007A0F3 - block
0007A0F9 - heavy armor
0007A0FB - light armor
0007A0FC - hack
0007A0FF - one-handed weapon
0007A106 - two-handed weapon
0007A100 - pickpocketing
0007A102 - blacksmithing
0007A103 - stealth
Promotion
00049504 - magic
000493AA - health
00049507 - reserve of strength
Regeneration
0007A0FD - mana
0007A0F8 - health
0007A105 - power reserve
Resistance
00048C8B - fire
00048F45 - cold
00100E60 - diseases
000B7A35 - all magic
000FF15E - poisons
00049295 - electricity
Reducing school magic consumption
00109634 - recovery
00109633 - illusions
00109631 - destruction
0010962F - witchcraft
0010962E - changes
Other
0007A0F4 - portable weight
000424E2 - damage without weapons
00092A57 - silent movement
00092A48 - underwater breathing
0010E809 - all spells cost 3% less magicka
0008850D - Screams cooldown reduced by 20%
000F82FF - additional transformation into a werewolf
00017120 - increase armor class
000FF15C - 2x damage for sneak attacks with one-handed weapons
Damage
0004605A - fire
0004605B - cold
0004605C - electricity
0010582E - Nords
00105831 - animals
000FEFBC - “Light of Meridia” - Burns the target for N units, and when killing undead, it gives a chance of a fiery explosion that destroys or drives away undead nearby.
Absorption
000AA155 - health
000AA156 - magic
000AA157 - reserve of strength
Takes away
0005B44F - magic
0005B450 - reserve of strength
Other
0003B0B1 - “Silent Moon” (additional damage at night)
000ACBB5 - expulsion of the Daedra
0001EA77 - fear
0005B46B - scaring away the undead
0001EA6E - paralysis
0004DBA3 - Soul Capture
001019D6 - increases Smithing and deals electrical damage
0002C593 - “Elemental Fury” - increases attack speed
Legendary weapons and armor.
Many people have probably heard about legendary armor and weapons, but not everyone knows how to get it. In fact, everything is quite simple and getting these items in Skyrim is not difficult, but first you need to tell us what they are. Legendary weapons and armor are still the same items, but with significantly improved performance. The percentage of improvement directly depends on the level of the Blacksmithing skill and the higher it is, the better characteristics the legendary armor or legendary weapon will have after improvement. You can improve weapons and armor at any level of blacksmithing, but in order for this item to be marked “Legendary” after improvement, you must raise your blacksmithing level to 91 or higher. So, what is needed to upgrade weapons and armor to legendary quality:
Regular armor or weapons;
ingredients for improvement (different for all things);
Blacksmithing level 91+
Workbench.
All of these things in Skyrim can be obtained in the usual way, but it will take a long time. Let's move on to creating improved weapons and armor using cheat codes and a game console:
Open the console;
player.setav Smithing 100 - pump up “Blacksmithing” to level 100;
player.placeatme 000D932F - create a workbench;
go to this page, look for the armor or weapon you are interested in and add it to your inventory using the command player.additem ID quantity;
We approach the workbench in the game and look at what ingredients are needed for improvement;
go to this page, look for the ingredient necessary for improvement and add it to your inventory using the command player.additem ID quantity;
We improve the item on the workbench.
That's all. You now have legendary quality armor or weapons.
Notes:
There is no single cheat code for obtaining armor and weapons of legendary quality in Skyrim - this is the fastest method;
if you level up “Blacksmithing” above 100, you will get even more powerful things;
all enhancement ingredients in the link above are in the "ingredients" or "other" group.
Conclusion.
Codes (cheats) for the game Skyrim work, 90% of players think so.
Good luck;)
| T.G.M. | Enable character immortality, infinite weapon charges, infinite carry weight |
| TCL | Enable the ability to walk through walls |
| TMM 1 | Open all locations on the global map |
| Player.SetAV Invisibility 1 | Turn on invisibility. Neither enemies nor allies will notice you. (To disable invisibility, enter 0 instead of 1) |
| Player.SetAV SpeedMult [#] | Set running speed as a percentage. (default: 100%) |
| SetGS fJumpHeightMin [#] | Set jumping height (default: 100%) |
| Player.SetAV AttackDamageMult [#] | Increase weapon damage by # times |
| Player.SetAV LeftWeaponSpeedMult [#] | Increase the attack speed of your off-hand weapon by # times |
| Player.SetAV WeaponSpeedMult [#] | Increase the attack speed of off-hand weapons and two-handed weapons by # times (all two-handed weapons count as off-hand weapons) |
| P.S.B. | Get all spells, abilities, shouts of power (Attention! leads to game instability, not recommended for use) |
Skyrim codes
1.2. Main characteristics of the hero
| ShowRaceMenu | Change the character's race. Allows you to go back to the character customization menu (Attention! After entering this code, the character's skills may be reset) |
| Player.AdvLevel | Raise character level |
| Player.SetLevel [#] | Set the required character level |
| Player.SetAV Health [#] | Set max. number of lives in # units |
| Player.SetAV Magicka [#] | Set max. amount of magic in # units |
| Player.SetAV Stamina [#] | Set max. amount of reserve strength in # units. If you set the value to a high value, the character will not get tired while running |
| Player.ModAV CarryWeight [#] | Increase character's maximum carrying capacity by # units |
| Player.SetScale [#] | Increase your character's height, where #: 1 - 100%, 1.1 - 110%, 0.9 - 90%, etc. |
Codes in the game Skyrim
1.3. Character Skills
Increased Experience in Skills: | AdvSkill Onehanded 999999 | develop the “one-handed weapon” skill to 999999 experience |
| AdvSkill Twohanded 999999 | Two-handed weapon |
| AdvSkill Marksman 999999 | shooting |
| AdvSkill Block 999999 | block |
| AdvSkill Smithing 999999 | blacksmith craft |
| AdvSkill HeavyArmor 999999 | heavy armor |
| AdvSkill LightArmor 999999 | light armor |
| AdvSkill Pickpocket 999999 | pickpocketing |
| AdvSkill Lockpicking 999999 | breaking |
| AdvSkill Sneak 999999 | secrecy |
| AdvSkill Alchemy 999999 | alchemy |
| AdvSkill Speechcraft 999999 | eloquence |
| AdvSkill Alteration 999999 | change |
| AdvSkill Conjuration 999999 | witchcraft |
| AdvSkill Destruction 999999 | destruction |
| AdvSkill Illusion 999999 | illusion |
| AdvSkill Restoration 999999 | recovery |
| AdvSkill Enchanting 999999 | enchantment |
Setting the skill level:
| Player.SetAV Onehanded 100 | raise "one-handed weapon" to level 100 |
| Player.SetAV Twohanded 100 | Two-handed weapon |
| Player.SetAV Marksman 100 | shooting |
| Player.SetAV Block 100 | block |
| Player.SetAV Smithing 100 | blacksmith craft |
| Player.SetAV HeavyArmor 100 | heavy armor |
| Player.SetAV LightArmor 100 | light armor |
| Player.SetAV Pickpocket 100 | pickpocketing |
| Player.SetAV Lockpicking 100 | breaking |
| Player.SetAV Sneak 100 | secrecy |
| Player.SetAV Alchemy 100 | alchemy |
| Player.SetAV Speechcraft 100 | eloquence |
| Player.SetAV Alteration 100 | change |
| Player.SetAV Conjuration 100 | witchcraft |
| Player.SetAV Destruction 100 | destruction |
| Player.SetAV Illusion 100 | illusion |
| Player.SetAV Restoration 100 | recovery |
| Player.SetAV Enchanting 100 | enchantment |
Codes in the game Skyrim
1.4. Character Perks
Using these cheat codes for Skyrim, you can quickly upgrade all your skills and get all the perks. To do this we will need the following cheats:
To pump up all the perks, do the following:
1. Using the AdvSkill [X] cheat, we raise any skill to level 100:
Example: AdvSkill Destruction 999999.
2. Apply the code Player.SetAV [N] 0 - set the skill level to 0.
Example: Player.SetAV Destruction 100.
3. After this, you can again add new experience to this skill. We repeat points 1 and 2 to earn more ability points. From time to time we lower the character's level to the previous value.
4. We spend the points we earn, which are several times more than usual, on purchasing all available perks in Skyrim.
All perks and spells can be added manually if you know their exact name.
| Player.AddPerk [name] | Add ability |
| Player.RemovePerk [name] | Remove ability. Ability Points will not be refunded |
| Player.AddSpell [name] | Add a magical ability to the player character |
| Player.RemoveSpell [name] | Remove ability |
Skirim codes
1.5. Increased damage from weapons, spells
These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all attacks and spells of this type.
Example: Player.SetAV DestructionPowerMod 100
This code will increase the damage from destruction spells by 100%, that is, twice.
| Player.SetAV OneHandedPowerMod [#] | increase damage from one-handed weapons by # percent |
| Player.SetAV TwoHandedPowerMod [#] | Two-handed weapon |
| Player.SetAV MarksmanPowerMod [#] | shooting |
| Player.SetAV BlockPowerMod [#] | block |
| Player.SetAV SmithingPowerMod [#] | blacksmith craft |
| Player.SetAV HeavyArmorPowerMod [#] | heavy armor |
| Player.SetAV LightArmorPowerMod [#] | light armor |
| Player.SetAV PickPocketPowerMod [#] | pickpocketing |
| Player.SetAV LockpickingPowerMod [#] | breaking |
| Player.SetAV SneakPowerMod [#] | secrecy |
| Player.SetAV AlchemyPowerMod [#] | alchemy |
| Player.SetAV SpeechcraftPowerMod [#] | eloquence |
| Player.SetAV AlterationPowerMod [#] | change |
| Player.SetAV ConjurationPowerMod [#] | witchcraft |
| Player.SetAV DestructionPowerMod [#] | destruction |
| Player.SetAV IllusionPowerMod [#] | illusion |
| Player.SetAV RestorationPowerMod [#] | recovery |
| Player.SetAV EnchantingPowerMod [#] | enchantment |
Codes from Skyrim
1.6. Screams of Dragons
Each line of the table contains three codes. You can only enter one of the three.
| Player.TeachWord [shout code] | Learn the word of power |
| Player.TeachWord 46B89 Player.TeachWord 46B8A Player.TeachWord 46B8B | Call of the Dragon |
| Player.TeachWord 13E22 Player.TeachWord 13E23 Player.TeachWord 13E24 | Ruthless force |
| Player.TeachWord 602A3 Player.TeachWord 602A4 Player.TeachWord 602A5 | Ice form |
| Player.TeachWord 6029A Player.TeachWord 6029B Player.TeachWord 6029C | Storm Call |
| Player.TeachWord 20E17 Player.TeachWord 20E18 Player.TeachWord 20E19 | Fire Breath |
| Player.TeachWord 48ACA Player.TeachWord 48ACB Player.TeachWord 48ACC | Time dilation |
| Player.TeachWord 2F7BB Player.TeachWord 2F7BC Player.TeachWord 2F7BD | Swift Dash |
| Player.TeachWord 60291 Player.TeachWord 60292 Player.TeachWord 60293 | Friendship with animals |
| Player.TeachWord 3291D Player.TeachWord 3291E Player.TeachWord 3291F | Elemental Fury |
| Player.TeachWord 32917 Player.TeachWord 32918 Player.TeachWord 32919 | Ethereality |
| Player.TeachWord 5D16C Player.TeachWord 5D16D Player.TeachWord 5D16E | Frost Breath |
| Player.TeachWord 602A0 Player.TeachWord 602A1 Player.TeachWord 602A2 | Disarmament |
| Player.TeachWord 3CD31 Player.TeachWord 3DC32 Player.TeachWord 3CD33 | Clear sky |
| Player.TeachWord 51960 Player.TeachWord 51961 Player.TeachWord 51962 | Call of Valor |
| Player.TeachWord 44251 Player.TeachWord 44252 Player.TeachWord 44253 | Dragon Slayer |
| Player.TeachWord 60297 Player.TeachWord 60298 Player.TeachWord 60299 | Death Sentence |
| Player.TeachWord 60294 Player.TeachWord 60295 Player.TeachWord 60296 | Whisper of aura |
| Player.TeachWord 6029D Player.TeachWord 6029E Player.TeachWord 6029F | World of kin |
| Player.TeachWord 3291A Player.TeachWord 3291B Player.TeachWord 3291C | Fright |
Screams from the Skyrim: Dawnguard DLC
| Player.TeachWord 02008A65 Player.TeachWord 02008A64 Player.TeachWord 02008A63 | Life Drain |
| Player.TeachWord 020030D4 Player.TeachWord 020030D6 Player.TeachWord 020030D7 | Summoning Durnevir |
| Player.TeachWord 02007CB7 Player.TeachWord 02007CB8 Player.TeachWord 02007CB9 | Soul Rip |
| Player.TeachWord 0201A162 Player.TeachWord 0201A163 Player.TeachWord 0201A164 | Call from the Cairn of Souls |
Skyrim: Dragonborn DLC Shouts
Open Dragon Shouts must be activated with Dragon Souls before use. In the game, Souls are given only for killing dragons. Using codes you can add the necessary Souls to your inventory:
To activate dragon screams, press: “Tab” – “Magic” – “Screams”, select a scream, press “R” – “Ok”. After this, the selected shout can be used.
TES 5: Skyrim codes
1.7. Cure from diseases
| Player.AddSpell 00092C48 | Lycanthropy- a spell to transform into a werewolf. Appears in the "Talents" section. To activate use the "Z" key. This talent cannot be removed. The transformation back into a human will occur automatically, after a certain period of time. |
| Player.AddSpell 000B8780 | Vampirism– the disease “Sanguinare Vampiris” appears. 3 days after infection, you have a 10% chance of becoming a vampire. If, 3 days after using this code, “Vulnerability to Fire” appears in the “Magic” - “Active Effects” section, you are a vampire. If nothing works, use the command Player.RemoveSpell 000B8780, and then again Player.AddSpell 000B8780 |
| Player.RemoveSpell 000B8780 | Cure from vampirism - the disease “Sanguinare Vampiris”. Acts only at the first stage of transformation (after the bite). After a complete transformation into a vampire, this code does not work! |
| SetStage 000EAFD5 10 ResetQuest 000EAFD5 | Cure from vampirism. Can cure any stage of the disease. The cure occurs by completing the quest, so to apply the code a second time, you must first reset the quest with the command “ResetQuest 000EAFD5”, then type “SetStage 000EAFD5 10” again. (Save before resetting quests) |
2. Codes for receiving items
TES V: Skyrim codes
2.1. Standard Inventory Management Commands
Skyrim 5 codes
2.2. Codes for gold
The Elder Scrolls V codes
2.3. Armor sets (sets)
Daedric Armor Set
Dragon Shell Armor Set
Dragonscale Armor Set
Unique armor with bonuses
| Player.AddItem 0007C932 1 | "Archmage's Robe" (armor) +100% to magicka recovery speed; all spells cost 15% less magicka |
| Player.AddItem 000F9904 1 | "Scholar's Diadem" (helmet) All spells cost less magicka |
| Player.AddItem 000FC5BF 1 | "Tarch of Bloodthirst" (shield) A shield hit deals 3 damage. damage over 5 sec. |
| Player.AddItem 000E41D8 1 | "Shield of Ysgramor" +20% magic resistance; +20 units health |
| Player.AddItem 000295F3 1 | "Ingol's Helm" +30% cold resistance |
| Player.AddItem 0002AC61 1 | "Skin of the Savior" (light armor) +50% poison resistance and +15% magic |
| Player.AddItem 00052794 1 | "Ebony Chainmail" (heavy armor) +You move more quietly and enemies who get too close take 5 poison damage per second |
| Player.AddItem 00045F96 1 | "Spell Breaker" (shield) +After blocking, absorbs up to 50 units. spell damage |
Masks (helmets) with bonuses
| Player.AddItem 00061CB9 1 | "Krosis" +20% to hacking, archery and alchemy skills |
| Player.AddItem 00061C8B 1 | "Morokey" +100% magicka recovery speed |
| Player.AddItem 00061CA5 1 | "Nakrin" +spells from the school of destruction and restoration spend 20% less mana; +50 mana |
| Player.AddItem 00061CC9 1 | "Vokun" +spells from the school of illusion, alteration and witchcraft cost 20% less mana |
| Player.AddItem 00061CC2 1 | "Otar" +resistance to fire, electricity and cold increases |
| Player.AddItem 00061CC0 1 | "Ragot" +70 stamina |
| Player.AddItem 00061CAB 1 | "Volsung" +20% discount on all products; breathing underwater; +70 load capacity |
| Player.AddItem 00061CC1 1 | "Hevnorak" +immunity to diseases and poisons |
| Player.AddItem 00061CCA 1 | "Wooden mask" |
| Player.AddItem 00061CD6 1 | "Konarik" +At low health, gives a chance to heal the wearer and damage nearby enemies |
| Player.AddItem 000D2846 1 | "Mask of Clavicus Vile" (heavy helmet) +10 to eloquence. Magicka recovery speed +5%. Favorable prices +20% |
The Elder Scrolls 5 codes
2.4. Weapon sets
Maces, poleaxes, axes
| Player.AddItem 00035369 1 | "Staff of Magnus" +Absorbs 20 units. magic per second, if the enemy has no magic - absorbs health |
| Player.AddItem 0010076D 1 | "Staff of Hevnorak" +Within 30 sec. deals 50 damage. damage per second from lightning. Apply to surface |
| Player.AddItem 000AB704 1 | "Haldir's Staff" +Calms weak enemies for 60 sec. or captures their souls if they die |
| Player.AddItem 000E5F43 1 | "The Staff of Yurik Goldurson" deals 25 damage. damage and takes away 50 units. of magic |
| Player.AddItem 0006A093 1 | "Tandil's Staff" +Creatures and people up to level 12 do not fight for 60 seconds |
| Player.AddItem 0002AC6F 1 | "Wabbajack" + Random effect every time you use it |
| Player.AddItem 0001CB36 1 | "Rose of Sanguine" + Summons Dremora for 60 sec |
| Player.AddItem 00035066 1 | "Skull of Corruption" +20 units damage Dreams collected from sleeping people increase damage to 50 units |
Unique weapons with bonuses
| Player.AddItem 000F1AC1 1 | "Dragon Scourge" +40 units damage to dragons and +10 units. Electric damage against all |
| Player.AddItem 000F5D2D 1 | "Pale Blade" +25 units cold damage; subtract 50 stamina from the target; weaker creatures and people take flight for 30 seconds |
| Player.AddItem 000956B5 1 | "Wuthrad" +Especially deadly against elves |
| Player.AddItem 000B3DFA 1 | "Chalk's Eye" +Fiery explosion deals 40 damage. damage in a radius of 4.5 m and sets targets on fire |
| Player.AddItem 000A4DCE 1 | "Bloody Thorn" +Fills the soul stone if the enemy dies within 3 seconds |
| Player.AddItem 00053379 1 | "Fierce" +15 units cold damage; takes away 15 units. the enemy's reserves of strength |
| Player.AddItem 000F8317 1 | "Cooler" +30 units cold damage; Chance to paralyze target for 2 seconds |
| Player.AddItem 00094A2B 1 | "Phantom Blade" +3 units extra damage, ignoring armor |
| Player.AddItem 000AB703 1 | "Curse of the Red Eagle" +Sets undead level 13 and below on fire and causes them to flee for 30 sec |
| Player.AddItem 0009FD50 1 | "Red Eagle's Fury" +5 units fire damage and sets the target on fire |
| Player.AddItem 000B994E 1 | "Valdar's Lucky Dagger" +25% critical strike chance |
Cheats for the game Skyrim
2.5. Accessories
Cheats Skyrim
2.6. Consumables: Ingredients, Soul Gems, Potions, Arrows
Soul stones
Books
Cheats from the game Skyrim 5
2.7. Treasure Chests
The game itself provides special cheat chests that contain all items of a certain type. For example, one chest contains all types of staves, and another chest contains all types of arrows.
Notes:
After opening cheat chests, the game may freeze a lot. In this case, you just need to wait no more than 1 minute.
If, after opening such a chest, you do not look at the objects, but immediately take all the contents (the “R” key), then the game can freeze.
| Player.PlaceAtMe | Create a new chest right in front of the hero |
| Player.PlaceAtMe 000C2CDF | Enchanted Weapon Pack |
| Player.PlaceAtMe 000C2CD7 | A set of enchanted armor, jewelry, clothing for a mage and a robber |
| Player.PlaceAtMe 000C2CE0 | Set of standard weapons |
| Player.PlaceAtMe 000C2CD6 | Standard armor set |
| Player.PlaceAtMe 000C2CDE | Set of staves |
| Player.PlaceAtMe 000C2CD8 | A set of armor and jewelry, clothes for a mage and a robber |
| Player.PlaceAtMe 0010D9FF | Skill Book Set |
| Player.PlaceAtMe 000C2CD9 | Spell Book Set |
| Player.PlaceAtMe 000C2D3B | Set of regular books |
| Player.PlaceAtMe 000C2CD4 | Set of arrows |
| Player.PlaceAtMe 000C2CDA | Set of ingredients |
| Player.PlaceAtMe 000C2CDB | A set of keys |
| Player.PlaceAtMe 000C2CE1 | Set of scrolls with spells |
| Player.PlaceAtMe 000C2CE2 | Set of potions, elixirs and tinctures |
Skyrim cheat codes
2.8. Enchanting (improving) weapons and armor
Enchanting is a skill with which you can independently add magical properties to ordinary objects.
Rules for creating enchanted items:
You can only improve the base item, without other enchantments;
Each item can have no more than 2 enchantments;
The quality of enchantment depends on the Enchanting skill;
1) upgrade the “Enchantment” skill to level 100 – Player.SetAV Enchanting 100.
2) open all enchantment perks (a way to upgrade perks).
There is a cheat code for adding a ready-made enchanted item to your inventory. To do this, you need to know the code of the base item and the enchantment code:
After enchanting, the item will have a very small charge (170-350). To increase the charge of a weapon, you need to pick it up and enter the following code:
Skyrim cheat codes
2.9. Legendary weapons and armor
Legendary weapons and armor are standard items, but with significantly improved stats. These items are created by professional blacksmiths (skill level 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item.
What is needed to upgrade weapons and armor to legendary quality:
1) blacksmithing level 91+;
2) workbench;
3) ordinary armor or weapons;
4) ingredients for improvement (different for all things).
All these things in Skyrim can be obtained in the usual way, but it will take a lot of time. With the help of cheat codes this process can be significantly speeded up. Enter the following codes:
1) Player.SetAV Smithing 100– pump up “Blacksmithing” to level 100;
2) Player.PlaceAtMe 000D932F– create a workbench right in front of you;
3) Player.AddItem [quantity]– add a blank item to your inventory (item codes can be found here).
4) In the game, we approach the workbench, see what ingredients are needed to improve the selected item;
5) Player.AddItem [quantity]– add the necessary ingredients to your inventory (item codes can be found here);
6) We approach the workbench and upgrade the item to legendary quality.
TES V: Skyrim codes
2.10. How to find out item ID
You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have a unique item and you want to create several more copies of this item, you can determine the item code:
1) Enter the code in the console: Player.ShowInventory
Note. This method always works, but if you have too many items in your inventory, you may have difficulty finding the item you need. In this case, use the second method.
1) Place the item whose ID you need to find out in an empty box (barrel, chest, bag or something else).
2) We come as close to the box as possible (it is advisable to sit down).
3) Open the console, click on the box in which our item lies, enter the command INV.
4) We look for the required item by name and look at the item ID.
Having found out the item code, we use it in the standard cheat for adding an item:
3. Codes for placing objects
Skyrim cheats and codes
3.1. Defining an object code
These commands only work when a specific object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, a message with the object code (object ID) will appear in the console.
To scroll through text in the console, if there is a lot of it, use the “Page Up” and “Page Down” keys.
If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time; it is enough to select it only once (the selection is saved).
There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly selected instead of the required item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.
Objects located outside of screen visibility can only be selected in the console by their game ID code. This is done using the PRID [item code] command.
Skyrim console commands
3.2. Placing objects
For the following commands to work, you must first select the object - open the console and click on the object. After this, the inscription (object ID) should appear in the middle of the console screen.
(All objects you create have an ID starting with FF000...)
Notes:
To apply several commands to the same object, you do not need to select it again each time; the selection is saved.
Sometimes, after using the Setpos and GetAngle commands, an object moves only visually, physically it remains in the same place (the texture moves, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable And Enable. You can also enter the command Setscale 1 to update the physical model of an item.
To align an incorrectly placed object, enter:
SetAngle x 0, SetAngle y 0, SetAngle z [any number].
Object Management
Cheats from Skyrim
3.3. Home objects
Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary workplaces: alchemy tables, forges, workbenches.
These cheat codes allow you to install workstations anywhere:
Furniture for home
When created, all items appear in front of you in the direction you are looking. To set the item level, before introducing the cheat, center your gaze so that the character is looking straight ahead, and not down or up.
| Player.PlaceAtMe 00089A85 1 | dummy |
| Player.PlaceAtMe CC16A 1 Player.PlaceAtMe CC163 1 | single door |
| Player.PlaceAtMe CC164 1 | double door |
| Player.PlaceAtMe B2456 1 | dragon head |
| Player.PlaceAtMe 3FA65 1 | moose antlers |
| Player.PlaceAtMe DD9E0 1 Player.PlaceAtMe DD9E1 1 Player.PlaceAtMe CF264 1 | moose head |
| Player.PlaceAtMe D9285 1 | crab |
| Player.PlaceAtMe D9276 1 | goat head |
| Player.PlaceAtMe 3858F 1 | fish |
| Player.PlaceAtMe D928F 1 Player.PlaceAtMe D928D 1 | big cat head |
| Player.PlaceAtMe D9289 1 Player.PlaceAtMe D9288 1 | wolf head |
| Player.PlaceAtMe D9287 1 Player.PlaceAtMe D927D 1 | beast head |
| Player.PlaceAtMe D8282 1 Player.PlaceAtMe D9281 1 Player.PlaceAtMe D927F 1 | bear head |
| Player.PlaceAtMe 93D39 1 Player.PlaceAtMe 93D3B 1 Player.PlaceAtMe 93D3D 1 Player.PlaceAtMe 93D3F 1 Player.PlaceAtMe 93D41 1 Player.PlaceAtMe 93D43 1 Player.PlaceAtMe 93D45 1 Player.PlaceAtMe 93D47 1 Player.PlaceAtMe B7E3E 1 Player.PlaceAtMe B7E40 1 Player.PlaceAtMe BF9CF 1 Player.PlaceAtMe BF9D1 1 Player.PlaceAtMe BF9D3 1 Player.PlaceAtMe BF9D5 1 | carpets (square) |
| Player.PlaceAtMe 95498 1 Player.PlaceAtMe 954A3 1 Player.PlaceAtMe 954A4 1 Player.PlaceAtMe 954A5 1 | carpets (round) |
| Player.PlaceAtMe 5C015 1 Player.PlaceAtMe 5C016 1 Player.PlaceAtMe 5C017 1 | animal skins |
| Player.PlaceAtMe 7EA42 1 | wall burning candles |
| Player.PlaceAtMe 1F24A 1 | table candle |
| Player.PlaceAtMe 5AD5B 1 | ceiling lamp |
| Player.PlaceAtMe 77761 1 | light source for illuminating dark rooms (invisible, cannot be selected/moved/deleted after installation) |
| Player.PlaceAtMe FFF46 1 Player.PlaceAtMe FFF48 1 | blue light source |
Codes for mannequin:
4. Codes for fast movement
| Help [part of title] 0 | To find out the exact names of the locations, enter the command. (The location name should not contain spaces, and if there are, enter only the first word). In the list that appears, using the “PageUp” and “PageDown” console scroll keys, we find the following lines: CELL: location_name (location id). Find out the full name or id of the location. |
| COC [location_name] | Teleport to a specified location |
| COC Qasmoke | Teleportation to test location. Here you will find all the game items and tools for making any items. |
| Player.MoveTo [object code] | Teleport to the specified object (character) |
| Player.GetPos x Player.GetPos y Player.GetPos z | Find out your current location in coordinates. (You need to enter 3 commands one by one and write down the coordinates shown. After that, you can teleport to this point using the following code) |
| Player.SetPos x [#] Player.SetPos y [#] Player.SetPos z [#] | Move your character to the specified coordinates. (Do not close the console until you use the command 3 times for each of the coordinates. Moving occurs only after closing the console). |
| TMM [#] | Enable/disable markers on the world map - remove everything. - show all. - show everything, but without the ability to quickly move |
5. Codes for friendly characters (NPCs)
Skyrim codes
5.1. Stop a fight with an NPC
1) We stand so that all the characters who attacked us are immediately visible on the screen.
2) Turn on the console, select each NPC in turn, enter the codes for them:
3) Player.SetCrimeGold 0– turn off the reward for our head;
4) StopCombat– disable the character’s aggressive behavior.
5) Only after we turn off the bounty on our head for all enemies, can we close the console. (If at least one NPC is not assigned a code, he will start attacking us again, and after him, all other NPCs will again become aggressive. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must apply the code to everyone) .
These commands do not work on our constant enemies (monsters and some story characters), who are always attacking us.
Skyrim cheat codes
5.2. NPC customization
Setting physical properties of NPCs:
| GetPos [axis] | Returns position along the (x,y,z) axis |
| SetPos [axis] [#] | Returns rotation along the (x,y,z) axis |
| SetAngle [axis] [#] | Rotates an object along the (x,y,z) axis |
| MoveTo Player | Move a non-player character to the player character. Using Player.PlaceAtMe will create a clone of the NPC |
| Disable | “Turn off” an object. It will remain in the game, but will not display or function. For complete removal see markfordelete |
| Enable | "Enable" object |
| Kill | Kill the selected target |
| Resurrect 1 | Revives the selected target |
| ResetAI | Restore default dialogues - erase the memory of the selected NPC. This command should only be used if you killed someone, resurrected them, and after that they refuse to talk to you |
| SetEssential [#] | Makes an NPC mortal (0) or immortal (1) |
| MarkForDelete | Delete the selected object or character. Important: using this code you can delete not only a chest, but also invisible objects that can be selected by clicking on them and which are necessary for the normal functioning of the game. Be careful when using this command. Objects created by console commands are deleted immediately, and those initially present in the game are deleted after saving and loading the game. There is no reverse command. To remove objects from the game, it is recommended to use this command rather than disable, since the latter only hides the item and does not delete it, as a result of which saves become bloated with unused objects. |
Customize NPC personality, characteristics, skills:
| SetRace | Changes the character's race. There are also the meanings of ElderRace and ElderRaceVampire - these races are something like the elders (for example, Esbern is an Elder, but he is also a Nord. Greybeards are also included here). Also, if you add Vampire at the end, then the object will become a vampire (example: OrcRaceVampire). Race names: ArgonianRace- Argonian, BretonRace- Breton, DarkElfRace- Dark Elf, ElderRace- Forest Elf, HighElfRace- High Elf, ImperialRace- Imperial, KhajiitRace- Khajiit, NordRace- Nord, OrcRace- Orc, RedguardRace- Redguard. |
| SetLevel ,,, | Sets the level of the non-player character. Enter SetLevel 1000,0,1,81 so that the character develops along with the player character from level 1 to 81. 1) [% ? 10] Percentage of level to the main character (1000 = 100.0%). 2) How much higher or lower than the level. 3) [entry level] The most initial level of a non-player character. 4) [level cap] The maximum level of a non-player character to which he can develop |
| GetAV [characteristics] | Gets the current value of each variable |
| ModAV [characteristics] [#] | Adds the specified amount to a value |
| ForceAV [characteristics] [#] | Sets the value to # quantity |
| SetAV [characteristics] [#] | Sets the specified quantity to the specified value. Unlike modav, it does not add to the value, but sets it |
| HasPerk | Checks whether the character has this ability |
Customizing NPC equipment:
| INV | Display the entire inventory of an object/NPC |
| SBM | Displays the trading menu with a character or creature even if he is not a merchant |
| OpenActorContainer 1 | open the selected creature's inventory. You can exchange items |
| DuplicateAllitems Player | copy all items from the inventory of a specified NPC or object to your inventory |
| AddItem [#] | Adds an item to an NPC's inventory. Note: It is useful to add gold to traders |
| Equipment [#] | Equips a particular item to the selected character |
| RemoveAllItems | Removes all items from an object |
| ResetInventory | Dress the selected character in his original equipment |
Setting up movements, NPC relationships:
| SetRelationshipRank [#] | Changes the relationship between two NPCs. [#] Possible values #: -4 - bitter opponents, -3 - enemies, -2 - enemies, -1 - rivals, 0 - acquaintances, 1 - friends, 2 - confidants, 3 - allies, 4 - lovers. All other values are set to 0 (familiar) Note: This code will also work on the player if you enter: player.SetRelationshipRank [#] |
| TDetect | Disable NPC's vision. Theft without consequences. Doesn't work on pickpockets |
| TCAI | Enable/disable aggressive actions on the part of characters and creatures. After casting, everyone stops fighting |
| TAI | Enable/disable the intelligence of characters and creatures. All the way to movement |
| Player.SetCrimeGold [#] | Sets a bounty on the head of a player character in a specific faction. |
| Player.SetCrimeGold 0 | Cancel the bounty on your head |
| StopCombat | Stop combat with the selected friendly character |
Skyrim V codes
5.3. NPC Control
With these cheats you can gain control over any monster or character. Do everything strictly in the specified sequence:
1) Switch to third-person view (key “F”).
2) We approach the desired character or monster whom we want to inhabit.
3) Open the console, select a monster by clicking the mouse, enter the codes:
5) Player.TC– Control the main character
6) TC– Control a non-player character or creature
8) Close the console.
Notes:
After gaining control of an NPC, you will only be able to move with it and will not be able to attack.
If you press attack, your main character will attack, and not the one you control. How to force NPCs to attack is unknown.
To return to normal play and gain control of your main character, enter in the console:
Cheats in the game Skyrim
5.4. NPC companions
In Skyrim, almost any character can be made your partner, so that he can follow us and help in battles. To do this we do the following:
1) We approach the required character, open the console, click on the character. Let's start entering codes:
2) SetRelationshipRank Player 3– transfer the character to a group of possible allies.
3) AddFac 0005C84D 1– add the necessary dialogue.
4) Close the console and continue the game. We talk to the character, select the dialogue that appears: “Follow me. I need your help".
| SetRelationshipRank Player 3 | Transfer a character to a group of possible allies |
| AddFac 0005C84D 1 | Add NPC dialogue to add him to your partners |
| Set PlayerFollowerCount to 0 | Adds dialogue for taking on new partners. After entering this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, no companions, then this command is useless. The maximum number of partners is 1. There is no point in entering something else instead of 0 - it will not give any effect. |
| Set PlayerFollowerCount to [#] | Set the number of partners. By setting “0”, you can refuse all companions at once |
6. Codes for completing quests
Skyrim has a lot of side quests that can take months to complete. Quests are a chain of several tasks (quest stages). Using codes, you can quickly complete both individual stages of quests and entire quests.
View codes from Skyrim
6.1. Search for quest
How to move to the quest goal:
ShowQuestTargets- we get the quest ID code. (Quest IDs, after introducing ShowQuestTargets, are located in exactly the same sequence as in the “Quest Log”).
4) In the resulting list, look for Current quest:, remember this ID. (To scroll the text in the console, press the “PageUp” and “PageDown” keys).
5) Now enter MoveToQt to teleport to the quest goal.
What are the codes in Skyrim?
6.2. Passing the quest
| StartQuest | Start quest |
| CompleteQuest | Complete the quest (This command is not recommended, as you will not be able to get the next quest if it is a quest chain. Use only if you want to complete the quest without being able to go further). |
| ResetQuest | Reset all stages of the quest, after which it can be completed again. (For this quest to be deleted from the Quest Log, you must save and load the game). |
| CompleteAllObjectives | Mark all quest tasks as completed |
| SetObjectiveCompleted [stage] [state] | Set all quest stage objectives to either completed (1) or failed (0) |
| SetObjectiveDisplayed [stage] [state] | Set the state of the quest stage tasks (0 - disabled, 1 - enabled) |
| SAQ | Start all quests in the game (may crash the game!) |
| CAQS | Complete all quests in the game (may crash the game!) |
Complete the quest step using the code:
1) Save the game and do not overwrite this save until we complete the quest.
2) Open your list of tasks (key “J”). Select the quest we want to complete and press “Enter”.
3) Open the console and enter ShowQuestTargets- we get the quest ID code.
4) Enter GetStage. The stage of this quest will appear in the console as follows: GetStage >> [number].00. We remember the number of the current stage of the quest.
5) Enter SQS- we get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 means that the stage has been completed, 0 means the stage has not yet been completed. In the resulting list we look for our remembered stage of the quest. Remember the number of the next stage.
6) Enter SetStage [stage]- set the stage of the quest. As a stage, enter the number of the next stage.
7) Enter MoveToQt- teleportation to the target of the selected task.
We begin to go through the next stage of the quest on our own.
Complete the entire quest using the code:
If you complete a quest using the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. At the same time, you will not receive any reward for completing the quest in this way.
To receive all the rewards for the quest, you must complete all its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages of the quest are completed. This is how you can complete any quest 100%.
7. Other codes
RPG Skyrim codes
7.1. Graphics and animation settings
| TFC | Enable/disable free camera |
| TM | Enable\disable interface |
| TG | Enable/disable grass |
| FOV[#] | Change first person camera view (default: 60-90) |
| Set TimeScale to [#] | Set the speed of the game time (20 - default, 1 - real day, 0 - stop the time of day) |
| Set KillMoveRandom to [#] | Set the probability of finishing animation (50 - default, 100 - maximum, 0 - off) |
| Set DecapitationChance to [#] | Set the probability of decapitation (40 - default, 100 - maximum, 0 - off) |
| S.W. | Changes the weather |
| FW | Changes the weather to another random one |
Skyrim codes
7.2. Game Settings
8. Solving problems with entering codes
Skyrim codes
8.1. Removing squares when entering cheat codes
It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because letters of the Russian alphabet are entered, but they are not supported in the game console. There are several methods to solve this problem.
Method 1. Switch the font in the game
Press the “Scroll Lock” key to switch the alphabet right in the game. (Doesn't always work!).
Method 2. Changing the font
1) Go to the game folder, find the file: Skyrim\Data\Interface\fontconfig.txt.
2) In the properties of this file, uncheck the “Read only” checkbox.
3) Open the file, replace the following line:
Map "$ConsoleFont" = "Arial" Normal
on
map "$ConsoleFont" = "FuturaTCYLigCon" Normal
Method 3. Set the English language in the console
If for some reason you are unable to remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before this, it is imperative to change the language in the console to English:
1) Go to C:\Users\[username]\Documents\My Games\Skyrim
2) Open the Skyrim.ini file.
3) In the text of the Skyrim.ini file after the lines:
sLanguage=RUSSIAN
add (not replace) the following line:
SConsole=ENGLISH
Method 4 - Set the English language in the Steam client
During the game, press the key combination "Shift" + "Tab". Right-click on your nickname in Steam, click change language, select “EN”.
If none of the methods work, and you do not own the original version of the game, then you should think about finding another image with the game or purchasing the original version.
Method 5. Set English as the default language in the OS
If you cannot change the input language using sConsole=ENGLISH, then you need to set the default English language in the computer operating system.
1) “Start” menu, line “Run...”
2) Enter the text: control international
3) Go to the “Languages” tab, “More details...”
1) Go to “Start”, line “Control Panel”
2) In the panel, select “Language and Regional Standards”, “Languages and Keyboards” tab
3) Select “Change keyboard...”
4) Find “Default input language” and select “English (USA)”, “Ok”.
1) In the lower right corner of the desktop screen, click on the inscription “RUS”.
2) In the “Language Settings” menu, select “English. Keyboard layout: US."
3) Move the selected line to the very top - press the “Up” button.
After this, the codes in Skyrim should be displayed normally.
|
Achievement "Honorary Reader Site" Did you like the article? In gratitude, you can like it through any social network. For you this is one click, for us it is another step up in the ranking of gaming sites. |
|
|
Achievement "Honorary Sponsor Site" For those who are especially generous, there is the opportunity to transfer money to the site’s account. In this case, you can influence the choice of a new topic for an article or walkthrough. money.yandex.ru/to/410011922382680 |
| + Add a comment |
The special edition allows you to use cheat commands to the same extent as in the original version of the game.
There is nothing wrong with using cheat commands in single-player mode. While playing the original or special edition of Skyrim, you have the opportunity to enter any cheat commands to your taste in the console. Use them to become invulnerable, gain the ability to fly, walk through walls, change your appearance or skills, place different objects on the map, and even complete a level. Here are instructions for activating these commands:
To open the console, click on the (tilde) button and enter the appropriate codes listed below. You can activate several commands at once. This way you will simultaneously acquire the skill of teleport, flight and invisibility.
Some commands require additional codes, of which we have compiled a list. We have selected the required number of non-player characters from Skyrim.
Be careful! Using some commands can lead to glitches, problems and crashes. You should definitely save before using these codes. You wouldn't want to mess up the passage and have to start all over again, right?
Console commands
tgm– The good old god mode, in which you are completely invulnerable and look like a real god.
tcl- No obstacles will stop you now. Walk through walls, ceilings and mountains like a ghost. Use the code again to return to normal state.
unlock– Can’t find the right key? Is your hacking skill too low? Open the console, click on the door or chest you want to open and write “unlock” in the line. If only it were like this in real life!
psb– You now master every spell in the game. Feel like a magic school graduate in just one click.
player.advlevel– Automatic passage of the level.
caqs– Automatically completes all stages of your main quest. Suitable for those who don’t like to bother playing games.
showracemenu– Don’t like the way the Bosmer looks? Now you can correct the appearance of your character, just like at the beginning of the game. But there is one thing: this command will restart the level and reset the skills.
player.modav skill X– Where “skill” is the skill that you want to upgrade, and X is the level of upgrade. The names of skills are entered into the line without spaces, with the exception of the “archer” skill, for which there is a special command - “Marksman”. The situation is similar with the eloquence skill, in this case you need to enter this name “Speechcraft”.
player.additem ITEM ###– Every item in the game has its own code, which is similar to the Argos store catalog. You will find all these codes in our list of things. Replace the word "ITEM" with the item code and ### with the desired quantity. Now the dream of having 47 servings of cabbage soup with you will become a reality.
player.additem 0000000f ###– An easy way to get gold in the game. Any number between 1 and 999 will do.
player.additem 0000000a “###”- Are you out of master keys? Enter the quantity you need and voila! They will magically appear to you.
addshout– Use in combination with codes from the Skyrim Wikia page to get your favorite screams in the game.
tm– Remove all game menus. Good for those who want to take a couple of screenshots to convince their grandparents that Skyrim is the only place you visited during the holidays. Don't forget that this command removes the console. So you will have to enter this command again, without the console.
tmm-Values of 0 and 1 disable and enable markers on the map, respectively.
tfc– Unfortunately, this is not Team Fortress Classic. However, you will have access to a “flying camera”, which will allow you to leave your character’s body and fly upward. A good thing for those who like to take screenshots.
tai– Non-player characters cannot interact with main characters.
tcai– Dragons become obedient creatures, like kittens.
tdetect– This command makes a scoundrel out of you: now you can steal, kill and go to the forest to relieve yourself without hindrance. But you will still be persecuted if you try to steal something from the pockets of passers-by.
player.setcrimegold ###– Adjust your wanted level with this useful command. Set the value to '0' and you will no longer be wanted.
player.setlevel ##– Set your difficulty level.
player.setav speedmult ###– Do you want to run like Flash? Set the value to more than 100 to speed up in-game movements.
movetoqt– This command directs you straight to a given goal.
kill- Look at the subject you want to kill. Go to the console, click on the target and enter the command. All enemies will fall before you.
help– This command lists all console commands. We decided to remember it here for you to read the article.
resurrect– Point your sight at the creature you want to resurrect, and it will rise before you more alive than all the living.
player.modav carryweight #– Are you tired of being tired? Upgrade your inventory and you will be able to carry more goods and things. The tgm command also allows you to move as many things as you like.
player.setav health #– Improves health.
coc qasmoke– Bethesda cleverly placed a special room in the game with all the game things. Write this command to find yourself in this room. It will take some time to load, there are too many things in this room. Type "coc Riverwood" to return to the game.
qqq– Exit the game without the help of any annoying menus.
removeallitems– Select a target and write this command. You will receive all the things of this character, even his clothes. Warning: Doesn't work in real life.
sexchange– Change the gender of your character.
set timescale to #– The default value is 20. Increase this value and get Skyrim in slow motion.
placeatme– Use this command to place NPCs and monsters near you. Simply select a code from our list of NPCs and monsters. This is the command we used to place an army of dragons around the city of Whiterun. Know that the team prefers adding new creatures to the map rather than old ones. If you use the command on NPCs, you will simply create clones of them.
moveto– Moves the player to an NPC. Useful for Karjo and nomadic Khajiit, who can be hard to find as they follow caravans throughout the province of Skyrim. In this case, you simply replace the words ''actor ID'' with a reference to the character. This command is the opposite of the placeatme command. You can find character IDs in the list we compiled.
setrelationshiprank– Choose two NPCs and establish a relationship between them. The value ranges from 4 (lover) to -4 (main enemy). At the same time, these characters will fight or do completely different things... unnatural.
addtofaction– Click on a non-player character and use this command to place him in one of the factions. This applies not only to the Stormcloaks faction and the Imperials. Code 0005C84D will add the character to a friendly faction. He will have new phrases that will allow him to join you. Code 00019809 will add the character to the faction of potential wives that you can marry. However, this does not work on NPCs with unique voices. So you won't be able to marry Esbern or General Tullius anytime soon.
disable– Command in the style of “I have no mouth, but I must scream.” Activating this command puts NPCs into a strange state. They are invisible, cannot be encountered, and cannot interact with the main character, but technically they still exist. Terrible, isn't it?
enable– Cancels the effect of the disable command. Using these commands returns your fellow players to the map, giving you the opportunity to verify their ability to fight.
setessential“It must be fun to play god mode and be immortal.” But don't you feel sad at the thought that all the characters you love will eventually die? I think it's sad. Fortunately, there is a solution: use a command with a value of 1 to give each character significance. Simply put, they will fall down from a lot of damage and get up again. Setting the value to "0" will make all characters mortal. Be careful with this team, it's not for nothing that Bethesda made all the characters immortal.
setownership– This command makes you the owner of the chosen item and removes all those “stolen” tags from your ill-gotten wealth.
setstage– Allows you to move to the initial or next level of the task. A useful command, especially when you fail a mission by killing the wrong character. There is a list of mission and level codes on the Skyrim Wiki page.
setscale– Changes the size of the main or non-player character. Standard value - 1. Small size - 0. You can increase the character to the maximum value - 10.
unequipitem– Select a character and enter a command. This will force the previously selected character to remove the item they are holding. It's especially useful when that character has a sword that you like.
fov– Sets boundaries for your field of vision.
tfow– Removes fog on the map.
player.Drop– Forces the character to throw away things, even those that are important to the quest. Type "drop" to drop everything from your current inventory.
dispelallspells– Removes all spells from non-player characters. Does not work on werewolves, as after transformation they become completely new NPCs.
MarkForDelete– Selects an item and deletes it so that it never appears on the map again. The next time you load this item will no longer be there. Helps get rid of annoying things like piles of ash that never go away.
setgs fJumpHeightMin– This command sets the jump height. A high value will send you straight to the moon.
player.moveto (without parentheses)- teleport to the specified object (character)
coc qasmoke- will move to the test location. Here you will find all the game items and tools for making any items.
coc riverwood- leave the test location and move to “Riverwood”. If you enter another name instead of “riverwood”, a teleport will occur to the specified location.
player.setpos [axis] [number] (without parentheses)- move your character to the specified coordinates. Instead of axis, you must specify x,y or z. And instead of a number - the offset along the selected axis.
Notes for player.setpos [axis] [number] (no parentheses)
To find out your current location, type player.getpos [axis] (without parentheses). This command must be executed 3 times and instead of axis, write x, y and z in turn. Then write down/remember all three numbers received.
If you know the exact coordinates to move, obtained previously using the player.getpos [axis] command (without parentheses), then use the player.setpos [axis] [number] command (without parentheses) to move to the specified coordinates.
Do not close the console until you have used the command player.setpos [axis] [number] (without parentheses) 3 times for each of the coordinates (x,y,z).
Moving occurs only after closing the console.
player.removeallitems- clear inventory. Removes ALL items in your inventory.
prid (without brackets) - select an object by its ID. I do something similar to the following: open the console - click on the object. After this command, the message “(object ID) should appear in the console. After which you can apply all the cheats written below without selecting the object. Using this cheat code, you can select a very distant object and apply the necessary action to it. For example, resurrect someone or view the contents of your inventory.
TheEldersScrolls:Skyrim is a big game with a wide range of possibilities. In the game, you can open the console and enter any code that will significantly simplify the gameplay or open up new options for the player. In addition, you can customize any setting according to your preferences.
How to enter codes correctly so that they work in the game:
- To activate the game console we must press the “~” (tilde) key.
- In the window that appears, we enter the required code (you can find all available and useful commands in our article).
- After pressing the Enter key, the code is activated in the game.
- The console closes after pressing "Esc".
Correct entry of cheat codes
When entering any code, the user must remember that all commands are absolutely case insensitive, so it does not matter whether the code is written in capital or small letters. You may notice the presence of square brackets in some commands. This means that instead of them the player needs to enter any necessary value. There is no need to write the staples themselves, just the number.
Basic codes:
- tcl – you can pass through any obstacles, even walls.
- tgm – complete immortality.
- tmm 1 – all locations on the map become available for fast travel.
- psb – the player receives all spells, dragon shouts and talents.
- killall - kill all non-player characters around the hero.
- qqq – exits the game to the desktop.
- advlevel - gain a level, but only without additional abilities.
- tfc – free camera mode.
- tdetect – you can steal freely: NPCs will not react to the player.
- tcai - disables the AI of opponents and friendly creatures.
- set timescale to 0 – time freezing. By setting your value, you can control time, speeding it up or slowing it down.
- sexchange – change the character's gender.
- showracemenu – opens the character customization menu, where the player can change the race, gender, name, and appearance of the hero.
- setlevel X - change the character's level by setting your own value.
- setav invisibility 1 – NPCs do not see the player.
- setav invisibility 0 – NPCs see the player.
- modav carryweight X - add a certain value to the carrying capacity.
- setav speedmult X – adjusts the player’s movement speed.
- setscale X - change the character's height, where X: 1 - 100%, 2 -200%, etc.
- setgs fJumpHeightMin 100 – setting the jump height.
- setav Health X - change the maximum number of lives.
- setav Magicka X - change the maximum amount of magic.
- setav Stamina X - change the maximum amount of stamina.
- setav attackdamagemult X - change weapon damage.
- setav leftweaponspeedmult X - change the attack speed of one-handed weapons.
- setav weaponspeedmult X - change the attack speed of secondary and two-handed weapons.
- setav LeftitemCharge X - charge the main weapon, the allowed value is no more than 3000.
- setav RightitemCharge X - charge an additional or two-handed weapon, the allowed value is no more than 3000.
- additem 0000000F X - add X gold coins.
- additem 0000000A X - add X master keys.
- placeatme 0010BF90 - Summon a spectral horse.
- setcrimegold 0 - cancel the bounty on the character's head.
- addspell 00092C48 — add the “Lycanthropy” skill to transform into a wolf/werewolf.
- addspell 000B8780 — add the skill “Sanguinare Vampiris” to transform into a vampire.
- moveto - move to an object or creature.
- coc qasmoke - teleport to a location to test game mechanics.
- coc riverwood - will move back from the test location to Riverwood (the location can be changed at will to any of the existing ones).
- setpos [coordinates] [number] – moves the character to the coordinates specified by the player
- getpos [coordinates] – the player can find out his coordinates (they will be displayed immediately after entering the code).
- removeallitems – completely clears your inventory of items and useful loot.
Controlling other characters in the game
There is a list of commands that allows the user to gain full control over any creature, be it an enemy or a friendly character. For the codes to work, you must do everything in the sequence described below:
- Switch to third-person view ("F" key on the keyboard).
- Standing in front of the living creature we need, we open the console.
- We click on the character with the mouse (this is easy to do, since the console is translucent and we can clearly see the objects around us).
- Enter the code TFC.
- Code Player.TC – allows you to control the main character.
- TC Code - allows you to fully control a non-player character or creature.
- Enter the code TFC.
- Close the console.
After gaining the ability to control a non-player character, the user will be able to move, but will not be able to attack with it. If you press the attack button, the main character will perform the actions, and not the one you selected through the console. A way to attack while controlling an NPC has not yet been found and most likely it will not be possible to do this through the console.
Cheats for quests
Skyrim has a large number of additional quests and optional story missions. Some quest chains can take several days or even weeks to complete (depending on how much time the player spends in Skyrim). If you have already seen certain quests and you have no desire to complete them, or if the task is bugged and does not allow you to progress further in the plot, then you can use the codes and solve the problem.
- SQT ShowQuestTargets – displays the ID code of the selected quest in the console, which allows further manipulation with it.
- SQS - displays all stages of the quest.
- GetStage – shows the number of the quest that the player is currently completing.
- SetStage [stage] – starts the selected stage of the quest in accordance with the entered ID code.
- MoveToQt – teleports to the quest mark (current task).
Moving to the quest goal:
- We save the game and do not overwrite this separate save again until all stages of the quest are completely completed.
- Use the J key to open the list of tasks. After we have selected the quest we need, press Enter
- Next, in the console window that opens, enter “ShowQuestTargets” and get the code for the required quest. They are placed in the console in exactly the same order as they are located in the task log.
- After receiving the quest, we enter MoveToQt and the player is instantly transported to the main goal of the selected quest.
Command “stop the fight with NPCs”
Before entering the command, you need to make sure that all the characters with whom the battle is currently taking place are in front of the screen. Next we proceed in the following sequence:
- Turn on the console and select each enemy character in turn. Then we enter the corresponding codes for them.
- SetCrimeGold 0 – disable the reward announced for our murder.
- StopCombat – disables aggression of enemy NPCs towards the player
IMPORTANT! After entering a code that disables the issuance of a reward for the death of our hero, you can close the console. If one of the attackers was not registered in the console (his ID code), then he will start attacking our character again. After a second, all the partners standing with him will also begin to attack. In order not to miss anyone, you should carefully look at the minimap.
All enemies are marked with red dots on it. This way we can call out all the enemies in front of you. Commands may not work for permanent enemies (those who are initially our enemies in the game), as well as some quest characters. They will always attack our GG.
Codes for manipulating objects
There are many items in Skyrim that in one way or another affect the character or are the goal of some task. Sometimes bugs occur that change the characteristics of an item or simply prevent you from receiving a reward for a quest.
- prid — select an object by its own code (you can find it out through the console by simply pointing at it with the cursor).
- stopcombat - stop fighting an enemy NPC.
- kill - kill the selected creature or character.
- resurrect 1 – resurrect the GG or NPC.
- resetai - Clears all dialogue and interactions for the selected NPC as if you had not spoken to them.
- openactorcontainer 1 - open the selected character's inventory.
- removeallitems - Clears the specified creature's inventory.
- equipitem - add the required item to the selected character.
- inv — open the inventory of the selected object.
- duplicateallitems player - Copies all items from the selected NPC's inventory into your backpack.
- resetinventory - return inventory contents to standard content.
- setownership - obtain ownership rights to a certain item (it will not be considered stolen).
- unlock - open the lock.
- disable – hide the required item.
- enable - show an object hidden from the player.
- markfordelete - delete the selected item or NPC.
Cheats for partners and NPCs
In Skyrim, any character can be made your partner. They often give the player an advantage and bonuses. This is help in battle, and an additional backpack for carrying cargo, and help in the battle with dragons. To make any NPC your partner, you should enter cheats in a certain sequence:
- The player must stand next to the selected character and open the console.
- Click on the character in the console and get the code.
- SetRelationshipRank Player 3 – the character is sent to a group of NPCs who can become the player’s partners.
- AddFac 0005C84D 1 – add a partner dialogue for the NPC.
- Close the console and continue the game.
- We start talking to the character and an option will be available in the dialogues that will make him our partner.
List of cheats for a partner:
- SetRelationshipRank Player 3 – sends the character to a group of partners.
- AddFac 0005C84D 1 – adds the “Follow me” dialog to the selected NPC.
- Set PlayerFollowerCount to 0 – After activating this code, which adds the appropriate items to the dialogue for taking NPCs as partners, you need to get rid of old companions (if necessary). Even after entering the code and receiving a new companion, old partners continue to follow the player. If you don't have a satellite, this command won't work. The maximum number of partners in the game is 1. Entering another value instead of 0 makes no sense, the cheat code simply will not work.
- Set PlayerFollowerCount to [#] – set it to zero and discard all companions who are currently following you.
Bottom line
If you know how to open the console and enter cheats, then this article will be very useful for you. Console commands open up new possibilities for the player, which he can use in any way he wants. Increase the size of your squad, skip uninteresting quests and work around any bugs found in the game.
