Samsung Galaxy Grand Max - Reviews and detailed technical specifications. Samsung Galaxy Grand Max introduced in Korea Processor, video card and RAM

Width information - refers to the horizontal side of the device in its standard orientation during use.

Height information refers to the vertical side of the device in its standard orientation during use.

Information about the thickness of the device in different units of measurement.

Information about the weight of the device in different units of measurement.

The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with the shape of a rectangular parallelepiped.

Information about the colors in which this device is offered for sale.

GSM (Global System for Mobile Communications) is designed to replace the analogue mobile network (1G). For this reason, GSM is often called a 2G mobile network. It is improved by the addition of GPRS (General Packet Radio Services), and later EDGE (Enhanced Data rates for GSM Evolution) technologies.

UMTS is an abbreviation for Universal Mobile Telecommunications System. It is based on the GSM standard and belongs to 3G mobile networks. Developed by 3GPP and its biggest advantage is providing greater speed and spectral efficiency thanks to W-CDMA technology.

LTE (Long Term Evolution) is defined as a fourth generation (4G) technology. It is developed by 3GPP based on GSM/EDGE and UMTS/HSPA to increase the capacity and speed of wireless mobile networks. The subsequent technology development is called LTE Advanced.

A system on a chip (SoC) integrates various hardware components, such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software necessary for their operation.

Information about the technological process by which the chip is manufactured. Nanometers measure half the distance between elements in the processor.

The primary function of a mobile device's processing unit (CPU) is to interpret and execute instructions contained in software applications.

The size (in bits) of a processor is determined by the size (in bits) of the registers, address buses, and data buses. 64-bit processors have higher performance compared to 32-bit processors, which in turn are more powerful than 16-bit processors.

Instructions are commands with which the software sets/controls the operation of the processor. Information about the instruction set (ISA) that the processor can execute.

Some processors have L0 (level 0) cache, which is faster to access than L1, L2, L3, etc. The advantage of having such memory is not only higher performance, but also reduced power consumption.

Cache memory is used by the processor to reduce access time to more frequently used data and instructions. L1 (level 1) cache is small in size and works much faster than both system memory and other cache levels. If the processor does not find the requested data in L1, it continues to look for it in the L2 cache. On some processors, this search is performed simultaneously in L1 and L2.

L2 (level 2) cache is slower than L1 cache, but in return it has a higher capacity, allowing it to cache more data. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for it in the L3 cache (if available) or in RAM memory.

The processor core executes software instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to be executed in parallel.

The clock speed of a processor describes its speed in terms of cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

The Graphics Processing Unit (GPU) handles calculations for various 2D/3D graphics applications. In mobile devices, it is most often used by games, consumer interfaces, video applications, etc.

Running speed is the clock speed of the GPU, measured in megahertz (MHz) or gigahertz (GHz).

Random access memory (RAM) is used by the operating system and all installed applications. Data stored in RAM is lost after the device is turned off or restarted.

Information about the type of random access memory (RAM) used by the device.

Information about the number of RAM channels that are integrated into the SoC. More channels mean higher data rates.

The frequency of RAM determines its operating speed, more specifically, the speed of reading/writing data.

One of the main characteristics of the screen is the technology by which it is made and on which the quality of the information image directly depends.

For mobile devices, screen size is expressed by the length of its diagonal, measured in inches.

Approximate screen width

Approximate screen height

The ratio of the dimensions of the long side of the screen to its short side

Screen resolution shows the number of pixels vertically and horizontally on the screen. Higher resolution means clearer image detail.

Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be displayed on the screen with clearer detail.

Screen color depth reflects the total number of bits used for color components in one pixel. Information about the maximum number of colors that the screen can display.

Approximate percentage of screen area occupied by the screen on the front of the device.

Information about other screen features and characteristics.

The most common types of flashes in mobile device cameras are LED and xenon flashes. LED flashes produce softer light and, unlike brighter xenon flashes, are also used for video shooting.

One of the main characteristics of mobile device cameras is their resolution, which shows the number of horizontal and vertical pixels in the image.

Information about the maximum supported resolution when shooting video with the device.

Information about the maximum number of frames per second (fps) supported by the device when shooting video at the maximum resolution. Some of the main standard video shooting and playback speeds are 24p, 25p, 30p, 60p.

Information about other software and hardware features related to the main camera and improving its functionality.

Information about some of the main characteristics and standards supported by the device's browser.

A battery's capacity indicates the maximum charge it can hold, measured in milliamp-hours.

The type of battery is determined by its structure and, more precisely, the chemicals used. There are different types of batteries, with lithium-ion and lithium-ion polymer batteries being the most commonly used batteries in mobile devices.

3G talk time is the period of time during which the battery charge is completely discharged during a continuous conversation on a 3G network.

Information about some additional characteristics of the device's battery.

The SAR level indicates the maximum amount of electromagnetic radiation that the human body is exposed to when holding a mobile device close to the ear in a conversation position. In Europe, the maximum permissible SAR value for mobile devices is limited to 2 W/kg per 10 grams of human tissue. This standard has been established by CENELEC in accordance with IEC standards, subject to the guidelines of ICNIRP 1998.

The SAR level indicates the maximum amount of electromagnetic radiation to which the human body is exposed when holding a mobile device at hip level. The maximum permissible SAR value for mobile devices in Europe is 2 W/kg per 10 grams of human tissue. This standard has been established by the CENELEC Committee in compliance with the ICNIRP 1998 guidelines and IEC standards.

The SAR level indicates the maximum amount of electromagnetic radiation that the human body is exposed to when holding a mobile device near the ear. The maximum value used in the USA is 1.6 W/kg per 1 gram of human tissue. Mobile devices in the US are regulated by the CTIA, and the FCC conducts tests and sets their SAR values.

The SAR level indicates the maximum amount of electromagnetic radiation to which the human body is exposed when holding a mobile device at hip level. The highest permissible SAR value in the USA is 1.6 W/kg per 1 gram of human tissue. This value is set by the FCC, and the CTIA monitors mobile devices' compliance with this standard.