Home Other Red stone (repeater). What does a repeater do in minecraft

Other

Red stone (repeater). What does a repeater do in minecraft

You need to start making a reddish repeater with the fact that in your own arsenal the player should have such details as a reddish torch and dust, as well as a stone. Using these parts you can, perhaps not the first time, but still, make a reddish repeater, which is a type of hard block.

Repeater implementation

After you have succeeded in making a repeater in Minecraft, consider how you will need it in the game, because this element can be used for several purposes. Namely, the repeater has the property of updating the acquired signal and its upcoming transmission. Let us remind you that the signal can be transmitted for less than Fifteen blocks. With the help of a repeater, you can transmit a signal through wires to 30 blocks, in other words, it expands your signal transmission player to another Fifteen blocks.

The repeater can also be used as a diode, or as an insulated wire. The signal can only be received by the repeater from the unit located at the rear. The repeater can transmit a signal only to the block located in front of it. These characteristics of the element can be used to create an obstacle that will not allow the signal to pass through the wire in the opposite direction.

Many experienced players who learned how to make a repeater in Minecraft immediately after it appeared in the game use this element as an insulated version of an ordinary wire. In principle, when building small-sized circuits, you can successfully use this repeater function, because it does not have parameters for interacting with adjacent blocks of a different type, regardless of their origin.

Techniques for use

If certain objects are placed at the repeater input, they can activate it. Such elements of the Minecraft game include another repeater, whose front panel faces the element that requires activation. The activator can be a reddish torch and any of the switches offered in the game, a section of wire and a block that must be previously powered by any method.

Please note that after you have succeeded in making a repeater in Minecraft, you can use it to activate many parts of the game that must previously be placed at its entrance. With the help of a repeater, a section of wire made of reddish dust and any mechanism controlled by a reddish stone are activated. The activator is a repeater for another repeater facing its input, any block that conducts electricity.

The repeater can be used as a delay element, so you need to press on its RMB. The delay value varies on a spectrum from 0.1 to 0.4 seconds. If a longer delay is needed, then use several repeaters installed in a close sequence, one to one.

A repeater (or repeater) is a special, “three-element” block of red stone structures. If a regular red dust line requires a delay, signal boost, or "relay" function, then players use it in the design.

Crafting such an element is simple - you need to get three blocks of stone (with an enchanted pickaxe or by firing cobblestones in a stove), place them in the bottom row of the crafting window of the workbench, and place a red torch in the two outer cells of the middle row. The middle of this row will be complemented by a particle of red dust.

The repeater is installed on the blocks in a piston-like pattern - the lower (back) side faces the player. This is convenient when the line is drawn directly under the player’s feet. A repeater is primarily used as a “signal extender.” A normal signal is not transmitted over a bare cable to more than 15 blocks. Installing a repeater increases the length by another 15 blocks - the function of a red torch is performed. Secondly, the delay that many players make, for example, on short circuits in farms, is also often used. The repeater positions can be changed with the right mouse button, increasing the delay by 0.1 s. Placing several repeaters in a row sums up their delays into one. Thirdly, a repeater can also act as an insulated wire - an active signal supplied from the side will not pass through the repeater, so small circuits are often built only from repeaters - in order to be able to run lines on two adjacent blocks without shorting.

Video guide:

For a beginner starting to master MyCraft, it is unlikely that a repeater will be needed. It is necessary for those who create circuits from redstone and know about the functions that the repeater performs.

The repeater is a multifunctional device. One of the elementary functions is the repetition of redstone signals. On its own, it only transmits a signal for 15 blocks. And if there is a need to create a large trap for mobs or a long automatic farm, then what to do in such situations? In such cases, you cannot do without a repeater, just as it is difficult to do without a good skin in Minecraft - you can easily find the best skins on the website skinscraft.com.

The indicator also functions as a diode. This function is useful for creating complex circuits. Redstone tracks can be laid in parallel and they will not interact with each other. This property will save resources and space when organizing circuits.

Among other things, the repeater delays the signal. The delay can be set between 0.1 and 0.4 seconds. If there is a need to increase the signal delay, then you need to place several repeaters at the same time.

Now about the main thing, to create a repeater you need to burn three cobblestones in the stove, so we will get a stone block. Next, you need to find three units of redstone, from 2 red torches, and place them on the workbench so that there is a stone at the bottom, a red torch in the middle cells on the right and left, and the remaining redstone in the center.

Question: I will have a very extensive question for you, and I hope I will have a detailed answer to it. I am glad that I found professionals like you. I would like to know what is the point?, and what is the principle of operation of these things in Minecraft, truly magical things: redstone (red dust), repeater, comparator, red torch, piston, red stone. 6 unusual things in minecraft - how do they work? 6 things, 3 questions for each, quite extensive, isn’t it?! The main thing for me is the correct and clear answers, THANK YOU IN ADVANCE. I want to learn Minecraft with all its secrets, I want to create hiding places, secret passages, sliding doors in my house. Come up with my own traps, all this requires this knowledge. Help me please...

Answer: I must admit that the question is indeed very voluminous, however, let's try to figure everything out in order.

Piston:

This element is quite interesting and has its own specifics - it is the one that can influence other blocks, i.e. move them both horizontally and vertically, and the piston power is enough to move as many as 11 blocks. This feature is precisely used to create traps (all kinds of failures) or sliding doors and gates of various heights, only in this case sticky pistons are most often used. Why sticky - because it is he who is able to move the block and return it back, i.e. in fact, 1 block will stick to its moving part.

It is the moving part that moves the block (it can be identified by its board-like texture), while the stone base remains in the place where it was installed. It is activated by a redstone signal, or you can place a lever, pressure plate, button, etc. directly next to it. When a signal is sent to it, the piston pushes out the moving part; as soon as the signal stops coming, the piston pushes the moving part in.

With its moving part, the piston can shut off liquids, which can be used as a controlled supply of both water and lava, and taking into account the fact that it does not burn in lava, this property can be used precisely as a trap element.

Red Dust:

Red dust is an element that falls out when red ore is destroyed, and taking into account the fact that red ore is generated in fairly decent quantities, if desired, there should be no problems with the extraction of this element.

It is from red dust that you can assemble circuits - in order to make a conducting path, you need to take it in your hand, point the cursor at the top edge of the block and press the right mouse button. The first red dust will look like a dot on the block, whereas if you place the second one next to it, a straight line will appear. It is precisely along this straight line that the redstone signal is transmitted, however, this line can only be 15 blocks long, since the signal simply will not be transmitted further, however, repeaters are used precisely for these purposes.

So, with the help of redstone you can activate, for example, a piston located at a distance of about 14-15 blocks from you (this does not take into account repeaters), and in order for the transmission of the redstone signal to begin, you need to activate the circuit, and this can be done using all the same levers, buttons, pressure plates, red torches, blocks of red stone.

Also, using a chain of red dust, you can activate a TNT charge, i.e. to actually create a remote-controlled minefield.

Repeater:

This element is also quite useful and lies in the fact that it can actually “repeat” the redstone signal, i.e. If an ordinary red dust circuit transmits a signal to 15 blocks, then with the help of a repeater this option can be doubled.

Its characteristic feature is that it transmits a signal with a slight delay, which is adjusted by right-clicking on it (4 positions with a delay of 0.1 - 0.4 sec).

Also, the repeater is a “diode”, i.e. actually passes the signal in only one direction - it perceives the signal from one side (closer to which there is a lever that cannot be moved) and releases it from the opposite side, whereas if a signal approaches it from the side, then in this case it will not receive it at all perceive. This property can be used in complex circuits in which intersections of redstone circuits are possible.

Red torch:

The red torch can be used as a source of a redstone signal or as an activator of various mechanisms, while it serves as a constant source of signal, i.e. Unlike a lever, button, or pressure plate, which function only when pressed or switched in the “on” state, it always produces a signal to operate, however, if you connect a switched-on red dust circuit to it, it will turn off.

Redstone block:

It is a stable and constant source of redstone signal. It has almost the same properties as the red torch, however, its stability lies in the fact that if an active red dust circuit is connected to it, it will not turn off.

Comparator:

This element can be called something like a “triode”, since in fact it has two inputs and one output. Its peculiarity lies in the fact that it perceives signal A at the rear, signal B at the side, while the output part emits only one signal - from the front.

Moreover, this element has two operating modes; you can switch them by right-clicking on it.

The first option is that the comparator compares the suitable signal powers. If A is more powerful than B, then from the front part the comparator will pass a signal of magnitude A, while if A is less than B, then the output power will be 0.

Option two outputs from the front part the difference between the incoming signals A-B.

This property can be used by creating very complex circuits and using characteristics that can turn off or send a signal at the required time. However, in practice, rarely does anyone “bother” so much and use mostly repeaters exclusively, although with this option it is possible to assemble circuits that will have several variants of the result.

I tried to explain in more detail everything about these elements and I hope that this article will be useful to you. If as a result of the answer something remains unclear, then contact us again, more specifically describing what turned out to be incomprehensible.

At first glance, Minecraft seems like a rather primitive and not particularly impressive game. The eight-bit graphics and the lack of a plot, a specific goal that other games have taught the player to strive for, are misleading. But in fact, such graphics give the game some zest, and the absence of a plot and campaign, on the contrary, gives more opportunities and more time to implement the plan. Without being distracted by plot twists, you can learn the most interesting aspects of the game much faster. For example, in Minecraft you can even transmit electricity through wires, which seems virtually unreal. But at the same time, it is transmitted only for fifteen blocks, so many players may think that this function is useless. But this is not so, because there is a special unit - a repeater, which allows you to extend the effect of electricity. How to make a repeater? This is the main question for those who want to use electricity, but cannot do so due to existing restrictions.

Functioning of electricity

Electricity in Minecraft runs through wires in the same way as in real life, but it is worth noting that in the game it can only travel a limited distance before it stops functioning. This distance was already indicated earlier - fifteen blocks, and it was also said that a repeater would solve the problem. But how to make a repeater? How to make it work? Many beginners cannot find the answer to this question, so they prefer to play without using this aspect. But it opens up new facets of the game! Therefore, everyone should know how to make a repeater to get maximum enjoyment from the gameplay.

Gathering resources

Like any other item, for a repeater you will have to collect a certain amount of resources, which will then be used for crafting. So, if you want to figure out how to make a repeater, first you will have to stock up on three blocks of stone, which you will later place in the bottom row of the workbench. In the central cell you need to place red dust, which can be the most difficult to find. On either side of it you will need to place two torches, which were previously used as a primitive repeater. But with one of the game's updates, the old technology was abolished, and the new one became publicly available. You can still use torches instead of a repeater, but this design will be much more cumbersome, although less resource-intensive. In any case, now you know how to make a repeater in Mine, so it’s worth moving on to the process of using it.

Electronic Signal Extension

Electricity runs through the wires no further than fifteen blocks. That is, you need to place the energy-consuming device at a distance of fifteen blocks from the energy source or use a repeater. You already know how to do it, so take a ready-made item and place it where your wire ends. And on the other side of the repeater, you can lay the next wire, which can transmit the signal to another fifteen blocks. The secret lies in the name of this device - the repeater repeats the cycle, zeroing out the distance traveled by the electricity before hitting the block. That's the whole secret of electrical communication in Minecraft. How to make a repeater, you know how it functions and why it is needed - too. But you can use it for other purposes as well.

Additional ways to use a repeater

The repeater in Minecraft can play a variety of roles, and you don't have to improve or simplify it - it's good as is from the very beginning. Most often it is used as an isolated diode. This becomes possible due to the fact that the repeater has only one direction, and if the current enters it from one side, it can only exit from the opposite side. Careful placement of repeaters on your network can allow you to interrupt the flow of electricity where you need it and control it as flexibly as possible.

Repeater clock

If the presence of a repeater in various circuits and electrical networks does not surprise anyone, even if it is not used there for its original purpose, then there are ways to use this item that may surprise. For example, people make watches out of it, because everyone knows that the repeater has four delay modes - from one tenth to four tenths of a second. If you put together two repeaters configured in the fourth mode and one in the second mode, you get a delay of one second. This is a rather creative and unusual approach to something related to a completely different topic - that’s what’s so wonderful about Minecraft.

A repeater is most likely an unnecessary item for a new Minecraft player.

However, avid conquerors of this world need to know what it is and what it is eaten with.

A repeater is a fairly multifunctional device.

It has three functions. Namely:

Repeats redstone signal. As you know, redstone can transmit a signal to no more than 15 blocks. But this is not enough to create a huge mob trap or farm. In this case, the repeater will become a reliable assistant. It can extend the signal for another fifteen blocks.
Serves as a diode. The repeater is capable of catching signals from one of the 4 sides, and transmitting it only in the opposite direction from the reception. This is very helpful when you need to create a complex circuit in which you need to isolate redstone tracks from each other.
Delays the signal. A switch is installed for the delay. The delay ranges from 0.1-0.4 seconds. If you need to increase the delay period, you can place additional repeaters. The delay is necessary to catch mobs. You can also use the delay to create lighting for your own home.

Creating a repeater

You need three cobblestones, which should be burned in the oven. They will make a stone block. Next, you need to craft red torches from two pieces of redstone and place them on the right and left of the workbench. The cobblestone is located below. And a piece of redstone is placed in the center. That's all for crafting a repeater!

To start making a red repeater, it is necessary to have in your arsenal the player should have such parts as a red torch and dust, as well as a stone. With the help of these elements you will be able, perhaps not the first time, but still, to make a red repeater, which is a type of solid block.

Using a Repeater

Once you have succeeded in making a repeater in Minecraft, consider how it will be useful to you in the game, since this element can be used for several purposes. In particular, the repeater has the property of updating the received signal and transmitting it further. Let us remind you that the signal can be transmitted over no more than 15 blocks. With the help of a repeater, you can transmit a signal through wires to 30 blocks, that is, it expands your signal transmission capabilities as a player by another 15 blocks.

The repeater can also be used as a diode, and also as an insulated wire. The signal can only be received by the repeater from the unit located at the rear. The repeater can transmit the signal exclusively to the block located in front of it. These properties of the element can be used to create an obstacle that will not allow a signal to pass through the wire in the opposite direction.

Many experienced players who learned how to make a repeater in Minecraft immediately after it appeared in the game use this element as an insulated version of a regular wire. In principle, when building compact circuits, you can successfully use this repeater function, since it does not have the ability to interact with neighboring blocks of a different type, regardless of their origin.

Techniques for use

If you place certain objects at the repeater input, they can activate it. Such elements of the Minecraft game include another repeater, whose front panel faces the element that requires activation. The activator can be a red torch and any of the switches offered in the game, a section of wire and a block that must first be powered in any way.

Please note that after you have succeeded in making a repeater in Minecraft, you can use it to activate many game elements that must first be placed at its entrance. Using a repeater, a section of wire made of red dust and any mechanism controlled by a red stone are activated. The activator is a repeater for another repeater facing its input, any block that conducts electricity.

The repeater can be used as a delay element, for which you need to click on its RMB. The delay value varies from 0.1 to 0.4 seconds. If a longer delay is required, then several repeaters are used, installed in strict sequence, one to one.

In today's lesson we will study the innovation of Beta 1.3, which I briefly mentioned last time. This time we will not slide past it, but will look at it from all sides.

Part zero. Repetition is the mother of learning.

Last time we amplified the signal with a clever design of two inverters. However, I honestly made a reservation that it was a retro device. In Beta 1.3, Notch gave us a new element of Red Logic, which can be used to amplify the signal. It is called by three names - Repeater / Diode / Delay.

Let's figure out how it works.

Part one. Diode.

Despite the fact that the Amplifier was written in the first mode, to understand the operation of the element, it is necessary to consider the principles of its operation from the Diode mode.