The success of its online promotion depends on the quality and uniqueness of the content that fills the site. Uniqueness is also required from educational works, such as abstracts, coursework, diplomas, original works, etc.

When it is impossible to write a completely unique text, resort to rewriting, or rewriting (from the English rewrite, rewrite). Rewriting is somewhat reminiscent of a school presentation, when the source text is retold (rewritten) in your own words. However, rewriting can also be different - sometimes it is necessary to study not one, but several sources, change the structure of the text (the so-called deep rewriting), sometimes it is enough to simply replace some words with synonyms.

The uniqueness of the text is checked using special anti-plagiarism programs and measured as a percentage. If the text is completely or partially stolen from another resource, the program will show a low percentage of uniqueness, and will also highlight non-unique passages and show their source.

Below are useful tips on how to achieve uniqueness and deceive anti-plagiarism. We hope that these tips will help you create an original text that is loyal to the customer and search engines.

How to make text unique: 4 steps

So, here is an approximate algorithm on how to bypass anti-plagiarism and achieve a unique result.

Step 1. Select a service to check

First we need to decide on a service that will check our work. There are many anti-plagiarism programs. If the customer has not specified a specific program, then it is better to check the uniqueness with 1-2 programs of your choice.

Some of them (like etxt, advego) require downloading and installation on your computer. Others, for example text.ru, are available to users online.

At the same time, you should be prepared for the fact that different services show different percentages of text uniqueness. The difference in readings can reach 50%!

The fact is that each of them has its own algorithm for counting and analyzing text material, which is inaccessible to most users.

Step 2. Save all text variations

The next step on the path to how to bypass anti-plagiarism is to save all versions of the text: both the original and all others.

The main thing is not to get confused and consistently change the structure and content, achieving the desired indicator of the anti-plagiarism program.

Step 3. Making the text unique

How to achieve this - read below. If 98-100% uniqueness is not required, it is better to play it safe and make the uniqueness 5-10% higher than necessary to pass verification on any service.

If free applications show a good indicator, then a paid one may underestimate it, and as a result, the uniqueness will not be what the customer required.

Knowledge is power! Or how to use shingle rules

A shingle is a small piece of text consisting of several words, which is used to check the uniqueness of what is written. If the shingle “3” is specified, this means that three words will be checked. Such data is set in the parameters of the program itself. It is easier to deceive the anti-plagiarist if you know this meaning.

The greater the shingle value, the easier it is to achieve original author material. But the optimal value for the customer and performer will be 4-5 words. Replace the first or last word in a phrase, and the text will immediately become original.

Step 4. Save the finished text

Once the required percentage of originality is obtained, the text must be saved and sent for verification.

All ways to bypass the anti-plagiarism program can be divided into honest (when the uniqueness of the text really increases) and dishonest (when the text remains the same, but the program perceives it as unique). Let's look at them.

How to make text unique: 6 honest ways

Below are working tools that will help make any source material unique for search engines.

Method 1. Deep processing of the source material/retelling in your own words

This is what is called rewriting, which literally means “rewriting” in English.

Method 2. Using synonyms

Do you want to know the answer to how to pass anti-plagiarism? Use synonyms. It is important to understand here: despite the fact that synonyms often make the material unique, the author is forced to constantly search for certain substitute words. As a result, he becomes fixated on this, which causes the meaning of the text to suffer.

Another interesting feature is to insert formulas and tables in the form of pictures. This technique allows you to increase the uniqueness of the text.

If the selection of synonyms goes poorly, use synonymizers. Synonymizers are special applications that allow you to quickly select words that are different in spelling, but similar in meaning to the original query. They are provided for a fee or free of charge.

They can request not only individual terms, but also entire phrases. This is convenient, but still does not make it possible to completely edit the previous material in a few seconds.

Method 3. Translating text from sources in another language

Translating text from sources in another language is a great way to fool etxt anti-plagiarism and any other program. The result is a completely unique work, because the source text for the rewrite was published in another language.

The problems are that

• you need to find material that is suitable in content, written in a foreign language. Obviously, you will have to find several sources to obtain the required content.
• you need to be able to translate it correctly.

translations themselves pay much better than rewriting. Read more in the article: “ How to make money by translating articles».

Method 4. Replacing frequently repeated words

Often these are some kind of conjunctions or words that are meaningfully related to the keys. We replace 1-2 synonyms that are close in meaning.

Method 5. Reworking the sentence from the end

Many sentences used in articles and other materials are complex. That is, they have two parts, one of which is subordinate to the other. It is enough to swap them in order to achieve not 100% uniqueness, but a good coefficient.

Again, a lot will depend on the size of the shingle. But in many cases, the meaning of a particular phrase can be conveyed to the reader in reverse order.

Method 6. Using words like “directly”

It is believed that using this or similar adverbs twice per 1000 characters will make the text more authorial, that is, original. With more frequent use, it may become noticeable. But here a certain skill is required in order to correctly and correctly enter these adverbs.

How to deceive the anti-plagiarism program: dishonest methods

In addition to honest (or relatively honest) methods, there are also dishonest methods that help to deceive the plagiarism program, forcing it to evaluate a non-unique text as unique.

• Adding automatic transfers

On the one hand, a very simple way from the field of how to cheat anti-plagiarism for free. On the other hand, not all works welcome this.

For abstracts this may be a suitable solution, but when writing articles for publication on websites, customers will not accept work with transfers, and their removal will immediately reveal the true state of affairs. Therefore, it is necessary to discuss all technical nuances in advance.

• Use of material not indexed by search engines

As a rule, search robots analyze material taken from a site and enter data about it into storage. The indexed text is thus the one that has already been checked by the search engines Google and others.

• Using Word macros

Macros are convenient for the user in that he can record the key combinations he most often needs and then access them as many times as needed in a second. This makes it possible to simplify frequently used actions or their combinations.

Working with text fragments works in a similar way, which makes it possible to increase its uniqueness.

• Visual Basic Macro Help

A method for programmers who know how to use Visual Basic, how to deceive anti-plagiarism and other programs. Everything is very simple: after each word or character, depending on the volume of text and the complexity of the task, a small dot of the 1st font is added.

It is almost impossible to see it visually. But in order to run this process for all words, you need to write a macro, and this will require knowledge of the basics of VB.

• Replacing Russian letters with Greek ones

Here's another interesting technique that not all copywriters use - many don't even know about its existence.

The fact is that systems do not yet recognize the Greek symbols micron and omega, which successfully replace the letter “o”, since they look almost the same, but for anti-plagiarism programs it is a completely different symbol. And just as replacing one letter in a passport makes you a different person, replacing one letter in each word can make the text unique to search engines and anti-plagiarism programs.

In some situations, certain uniqueness requirements are imposed on the text. This is often encountered by students who write their dissertations, because teachers check coursework for the presence of copied text. There are several ways to cheat anti-plagiarism in order to increase the percentage of text uniqueness.

How to pass anti-plagiarism

For many graduate students, university students, and freelancers, the issue of passing the uniqueness test becomes a real problem. Employees of SEO studios (copywriters, rewriters) also try to achieve maximum originality of the text. In such cases, it will be useful to know how to pass plagiarism with the required threshold according to the requirements. First you need to understand what is meant by this concept.

Plagiarism is the conscious appropriation, issuance of someone else’s work under one’s own name: music, text, discoveries, etc. In this case we are talking about abstracts, theses, scientific conclusions, texts for websites. Department staff or a supervisor use several services and programs to determine which parts of the work were written independently by the student and which were simply copied from free sources. The following options are considered the most popular:

• Content-Watch – online service;
• Anti-plagiarism – online check;
• Text.ru;
• ETXT is a program that is installed on a computer;
• Advego – program (can be downloaded for free).

The results may differ slightly when checked by different services, but their operating principle is the same. The developers carefully hide the essence of the algorithm and constantly improve it, so the method of comparison can only be guessed from general information. So far, the following points are 100% known:

1. For the system, all text is a set of sentences and words.
2. During verification with texts published on the Internet, the document under study is compared with the program databases. If the order or arrangement of characters matches, the system produces a match in the text and designates it as a non-unique part.
3. To bypass the algorithm, you need to change the words and the order of writing, this will help avoid overlaps with other works.

How to bypass anti-plagiarism

A robot checks a person’s work and compares matches of 4 and sometimes 3 words, which often leads to the determination of stable phrases as plagiarism. Methods of how to deceive the anti-plagiarism system can be useful even to those people who actually prepare texts on their own. It is believed that to cheat a program you just need to write 100% everything yourself, but in reality this advice does not always work, so you have to resort to some free tricks:

1. Try to select unpopular topics for the article. The less often this problem is covered on the Internet, the higher the chance of getting good uniqueness.
2. Try to use modern scientific works for writing rather than textbooks. More sources will help reduce the likelihood of overlap with other texts. Some of the latest articles may not even be in the anti-plagiarism software database yet, which will increase the chances of bypassing the check.
3. Process texts manually: change words to synonyms, rephrase expressions where possible without losing meaning, add new words to non-unique sentences.
4. If the assignment requires it, insert more personal conclusions, reflections, and comments.
5. Treat writing a paper like a presentation. Read the paragraph carefully, then you need to write the same thing, but in your own words. Often this method works much better than technical options to outwit Anti-Plagiarism. Moreover, this cannot even be called deception; you really write the work yourself.

How to increase the originality of text in Antiplagiarism

You can bypass anti-plagiarism in several ways - linguistic and technical. The first option is based on writing an original text by selecting synonyms of words, rearranging and adding parts of the text. The second one can more fairly be called a deception, because macros, hidden inserts, and symbols of a different alphabet are used. Below are some linguistic tips on how to bypass anti-plagiarism for free:

1. Many topics have already been discussed by foreign authors. Find a suitable text and run it through a translator (it is better to use fresh materials). Change the source so that you get a conscious Russian text, “comb” it. The likelihood of being able to bypass anti-plagiarism will greatly increase.
2. Many new books with scientific papers do not have a digital copy on the Internet. Find such a textbook on a given topic, take photographs of the necessary pieces of text. On a computer, you can recognize what is written from a photograph using ABBYY FineReader and convert it into a printed format. There is a high chance that this work is not yet in the anti-plagiarism database.

How to bypass the anti-plagiarism system using technical means

This is the second way to deceive the anti-plagiarism site when checking any article or thesis. There are options to use some tricks that will make the program “think” that the work is unique. You can do the following:

1. Areas of invisible text, also called anchors. The trick is that in parts with low uniqueness, blocks with original (but not always meaningful) text are inserted, which a person does not see, but is taken into account by the verification program.
2. Replacing characters from one language to another. It doesn't always work, but you can try. For example, it is possible to change the Russian letter “o” to the Greek omicron “o”. Keep in mind that you will be able to deceive the online service, but the inspector will open the file, and some of the words in it will be underlined in red, indicating a spelling error.
3. In some places (for example, tables), replace the symbols with a picture (screenshot). The system only works with letters, images are not taken into account.
4. You can correct uniqueness by selecting synonyms for frequently used words. After autocorrecting, be sure to proofread your work; some areas may need to be redone.

How to bypass anti-plagiarism on paid services

Above we discussed working methods on how to bypass anti-plagiarism without investing money. Some people manage to achieve the coveted percentage of uniqueness, while for others things are a little worse. For such cases, there is a paid option - order an increase in originality. There are many companies and freelancers on the Internet who are ready, for a certain amount of money, to take on increasing the uniqueness of the text and removing unoriginal parts from it. The cost may vary depending on the amount of work, the complexity of the topic and the deadline by which it must be submitted.

If you are initially not sure that you are able to fulfill all the requirements of the task, you should think about ordering a ready-made SEO article, coursework, or diploma. They can write them for you from scratch, and they guarantee that the text will pass an anti-plagiarism check. If this does not happen, additional revisions are often carried out free of charge until the work passes the test of originality. The price for services will be high, but you will be able to save a lot of time and your own nerves.

Video: how to cheat anti-plagiarism

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

Discuss

How to increase the originality of the text and bypass anti-plagiarism online

• • Check uniqueness
  • Select a bypass method
  • Save the finished version
• • Deep text processing
  • Using synonymizers
  • Using the shingle rule
  • Using Word Macros

The question “how to cheat anti-plagiarism” is perhaps the most frequently asked question on the Internet. As you might guess, information about ways to bypass the uniqueness check is primarily of concern to authors (copywriters, rewriters), as well as students, whose dissertations and term papers have been checked for several years using various plagiarism detection services.

In those half-forgotten times when the Internet worked only on cards, the problem of plagiarism was not so acute, but over the past 10-15 years the issue, as they say, has come to the fore. With students, everything is more or less clear: it is much easier to adapt someone else’s thesis found on the Internet to yourself than to write it “from scratch”, developing diagrams, drawings and an explanatory note yourself.

But why are content authors also interested in ways to pass anti-plagiarism checks? Yes, because you often have to write about things that have already been written about many times before. And how, in this case, can we increase the uniqueness of the text if we are talking about, say, scientific developments in a specific field or specific individuals?

In this article we will try to consider ways to increase the uniqueness of the text that appeared or have not lost their relevance in 2019.

Sequence of actions for unique text

Select a service to check the uniqueness of text

It should be understood that choosing a service that is obviously low-functional for checking text for plagiarism is, at a minimum, stupid - after all, after submitting the work, in 99% of cases we will be checked by a paid program with wide functionality, which means that we should initially use the most powerful resource possible.

Check uniqueness

Having copied the text to be checked into the workspace of the program or resource, we launch a uniqueness check and wait for the information to be processed. It’s strange, but different services show uniqueness in different ways - for example, the uniqueness of the same text can be rated 95% in Advego Plagiatus, but on Text.ru it can get a “pathetic” 60%.

What is the reason for such a dispersion in the results?

Different operating algorithms. For example, Advego Plagiatus can work according to the shingle rule (“a sequence of words extracted from the text”; we will look at them in more detail in one of the following paragraphs), and Text.ru can evaluate the text as a whole, using the most advanced methods.

Save original version

So, we checked the text for uniqueness, and the result of the check did not suit us (the percentage was too low).

In this case, we must first make a backup copy of our text in order to return to it in case the revision of the original turns out to be excessive and irreversible.

Select a bypass method

After the backup copy is created, we return to the original and determine which method of bypassing anti-plagiarism is best used for our specific case (we will talk more about methods of bypassing anti-plagiarism in the corresponding paragraph).

We make the uniqueness 5-10% higher than required, since the paid version underestimates the value

Having decided on the bypass method, we process the text using the chosen method, taking uniqueness as a guide, 5-10% higher than required. The fact is that paid plagiarism checking services, as a rule, underestimate the uniqueness value by approximately this amount due to “advanced” search tools.

Save the finished version

When the goal is achieved, we save the finished version, send it to the customer and wait for approval.

Now that the sequence of actions has been determined, let's take a closer look at 14 working methods on how to bypass anti-plagiarism.

14 working methods for unique text

Deep text processing

The most honest way to uniqueize text. Does the uniqueness determination service consider the uniqueness to be low? We are reworking the text in order to minimize overlaps with other similar articles posted on the Internet.

Retelling the text in your own words

Another completely honest way to uniqueize the text. We read someone else’s article and try to retell it in our own words, omitting details that we think are unnecessary and highlighting the main points. The effectiveness of the method in this case is limited by the author’s vocabulary and his ability to process information.

Using synonyms using epithets

Synonyms allow you to avoid repeating words, but the order of words in a sentence does not change from such a replacement. Therefore, it is recommended to use not only synonyms, but also various epithets - they allow you to diversify the source text and make it more vivid. But don’t overdo it - after all, we are not writing fiction, but articles.

As for tables and formulas, in their original text format they will be regarded by uniqueness checking services as duplicates from other resources, while anti-plaiator programs cannot recognize the text in a picture.

Using synonymizers

This method is identical to the previous one, but is suitable only if we need to increase uniqueness by an insignificant amount - for example, the same notorious 5-10% margin for successfully passing the test on the customer’s paid utility.

Adding automatic transfers

Adding automatic hyphens in the text also allows you to add uniqueness to the text, although very slightly.

Using the shingle rule

A shingle is a sequence of words extracted from the text (usually three or four, although variations are possible). Many uniqueness checking programs are based on the shingle rule. It should be taken into account that each subsequent shingle “captures” a word from the previous one, forming a kind of “chain” of “link” phrases.

To use this method “against” the creators of plagiarism checking programs, we must replace the first and last words in each link with synonyms. Such actions can still significantly increase the level of uniqueness of our text, despite the fact that in the latest versions of plagiarism checking programs, developers have significantly complicated the way they evaluate the text.

Translation of text from sources in another language

Anti-plagiarism services, as a rule, look for matches in the Russian-language segment of the Internet; accordingly, to increase the uniqueness of the text, we can use translated fragments from foreign resources.

Use of materials not indexed in search engines

When working, anti-plagiarists use search engines to find sentences and phrases copied from other resources. It is logical to assume that those sites that are not indexed in search engines can be reproduced in your texts without the risk of being caught in plagiarism. Another thing is that you can only find valuable information that was not indexed by search engines on closed forums... where you will either not be allowed in initially, or will no longer be allowed in after you publish classified information in your article.

Using Word Macros

If you want to learn how to cheat anti-plagiarism using Microsoft Word macros, we recommend watching the following video:

Replacing Russian letters with Greek ones

Modern plagiarism detection systems have learned to find letters of the Latin alphabet, but developers have not yet reached the Greek alphabet. The logic is simple: if you replace some letters in words that are interpreted by the program as plagiarism, the percentage of uniqueness will increase. Although it should be borne in mind that developers also do not stand still, and it is quite possible that the next time you try to increase uniqueness in this way, anti-plagiarism services will already adapt to such a “trick” and recognize the deception.

Replacing frequently repeated words

The more often specific words or phrases are repeated, the lower the percentage of text uniqueness will be. Avoid repetition, do not forget about synonyms and pronouns.

A method for Visual Basic programmers

Using the Visual Basic software environment, you can create macros yourself (similar to the method described in the video, you can replace the letters of the document with Greek ones throughout the document)

Rewriting a sentence from the end

We are, of course, not talking about any sentences, but about complex sentences in which the second part is subordinate to the first. If you can intelligently swap them, the uniqueness of your text will increase slightly. Of course, one should not do this if the meaning of the paragraph is completely or partially lost: what is the use of uniqueness if the text becomes unreadable?

Use of the word “directly” and others

There is an opinion that the use of additional adverbs (in particular, the word “directly”, which can directly use in almost any sentence) allows you to significantly diversify the text and, accordingly, increase its uniqueness. However, you should insert adverbs no more often than 2-3 times per 1000 characters, otherwise customers will probably accuse you of too much “water”.

Let’s finish this story about methods that increase the uniqueness of a text and talk about methods that are only considered effective, but in fact will not help you in any way in the difficult task of deceiving anti-plagiarism.

Methods that will NOT help to uniqueize text

Rearranging words and phrases

If you try to cheat anti-plagiarism by simply moving a phrase from the beginning of a sentence to the end, you will not achieve an increase in the uniqueness of the text. The Russian language is, of course, flexible and not as strict in constructing sentences as English, but developers of uniqueness checking resources have long adapted to this.

Rearranging sentences and paragraphs

Here everything is even more transparent: the program does not care which sentence comes first and which comes second, the main thing is that within the sentence all the “connections” remain in the same places.

There’s no point in trying with paragraphs – you’ll just waste your time.

Latin letters instead of Russian

As mentioned above, developers of anti-plagiarism services learned to detect Latin letters in Russian texts a long time ago - through a banal spell check, followed by autocorrection and a second “run”.

Breaking or merging sentences

It doesn’t matter at all whether you operate with simple sentences or complex sentences consisting of these simple ones. A comma placed instead of a period, or a period appearing where there was a comma in the original, unfortunately, will not increase the uniqueness of the text in any way.

Replacing periods with commas and vice versa, periods instead of spaces, and so on

Trying to confuse the uniqueness checker with punctuation marks, we repeat, will lead nowhere.

And the customer, presumably, will not be delighted when he finds dots instead of spaces in the text: if you are lucky, you will be asked to simply eliminate this defect; if not, they will refuse your services forever.

Painting the text background white

Repainting the text white is another idea that is immediately doomed to failure, because when you insert an anti-plagiarism program into the work area, all the text will lose its original formatting - and the same will happen with your employer, especially if he also prefers to check the text by “ copy-paste."

Hidden text out of sight

Similar to the previous point - all hidden text will definitely come to light at the first detailed check.

Using programs to increase uniqueness

If there is demand, there will be supply. Apparently, the creators of various programs that supposedly “increase the uniqueness of the text” were guided by this simple law of the market. In fact, this is at best a useless trinket, at worst a Trojan, for which you will also pay your hard-earned money.

Details Created: 03/21/2017 11:01 Updated: 11/26/2019 13:53 Published: 03/21/2017 11:01

How to increase the uniqueness of text for free in anti-plagiarism: tips and secrets

“Everything new is well forgotten old.” So it was, is and will be. All the works of the world are mostly non-unique and repetitive. But evil teachers (or customers) force you to submit your work with a 100% result. To do this, special anti-plagiarism checking programs are used, which, fortunately, can be bypassed. But, you must admit, you don’t always have the time or desire to retell someone else’s thoughts; this will not benefit anyone. And on the Internet there are a lot of ways to increase the uniqueness of the text, and they will be discussed in the article.

In what cases may it be necessary to increase anti-plagiarism:

• It is necessary to increase the uniqueness of the abstract;
• It is necessary to increase the uniqueness of the coursework;
• It is necessary to increase the originality of the diploma;
• Increase the uniqueness of your own text for delivery to the customer;
• Increase uniqueness in Word documents in formats: docx, doc, rtf or pdf.

Of course, there are other options when you need to increase uniqueness, but these are the most basic.

Basic anti-plagiarism and uniqueness checking programs

The most popular copywriting service in RuNet. It has its own verification module, more stringent than all the others, which quite strongly notices rewriting (we’ll talk about it below). The text is considered unique if it is 100% accurate on this service.

Advego Plagiatus

The most stringent anti-plagiarism program. It's quite difficult to get around it. The program is downloaded to your computer and checks every sentence of text on the Internet. The antivirus often complains about it. The uniqueness of the text is considered high with more than 90% anti-plagiarism.

Antiplagiat.ru - a service that allows you to check for free

The main program for checking for anti-plagiarism in universities. It is on it that all coursework and dissertations will be checked. It has the ability to connect all scientific works from the Elibrary.ru library. Finds many similarities and therefore a percentage greater than 70% is considered good.

Etxt - Anti-plagiarism

The principle of action is similar to Advego Plagiatus. However, it has a more improved interface and an expanded set of functions that improve checks. The uniqueness of the text is considered high when it reaches 100%.

Ways to increase the originality of the text

Today, there are the following ways to increase the uniqueness of online text:

• Rewriting;
• Special programs that increase anti-plagiarism;
• Specialized sites;
• Own retelling of the work so that the file has a high percentage.

These are all the methods for now, but in the future, most likely, new ones will appear.

Rewriting - as an effective method of increasing the originality of the text

For some, this is a form of earning money on the Internet, while for others it is a great opportunity to increase the uniqueness of the text. The essence of this work is that the performer rewrites fragments of the text, replacing words with synonyms and similar meanings. Of course, this service is not free. The average price for one thousand characters is 25-40 rubles, depending on the professionalism of the performer. You can find performers on the popular RuNet exchanges Text.ru, Etxt and Advego.

+ Unique article, document;

+ Fully preserved meaning;

+ Quite low pay.

- There is still payment;

- Approximate order completion time is 2 days.

Programs specializing in increasing the uniqueness of text

There are options for both programs that allow you to increase the uniqueness of the text for free, and paid versions that work a little better. The essence of these programs is to replace words with synonyms, add words to sentences, replace Russian characters with English ones, thereby trying to increase the percentage of originality of the document. All this affects the increase and increases originality, however, some programs notice the substitution of letters. When downloading such programs, you need to be as careful as possible; you can easily catch a virus.

However, their job is to use special online algorithms that are easily found by the program and it is no longer possible to deceive anti-plagiarism. Therefore, it will not be possible to increase the uniqueness of the text online; their use is best suited for weak anti-plagiarists, and not for such powerful sharks of this business, which are presented above.

The two most common programs for increasing anti-plagiarism are:

Antiplagiarism Killer

Pros and cons of this option for increasing anti-plagiarism:

+ The cheapest option of all;

+ Fast operation, everything happens online;

- Their work is easy to detect by anti-plagiarists;

- There is a possibility of picking up viruses

Websites that will help increase originality

There are also sites on the Internet that specialize in increasing the uniqueness of online text. There are a sufficient number of such sites, make sure that it is not created by scammers. Usually they take money and don't do the work. Use only proven services and understand how to increase your uniqueness.

There are usually two algorithms for website operation:

• Using programs that increase text originality;
• Rewrite.

The programs of such sites differ from those that are publicly available. They use their own special algorithms in programs that the verification program usually cannot find, and they can easily help increase originality.

Sites that use rewriting are somewhat similar to exchanges. They usually have their own staff of rewriters who rework the uniqueness of the text and can increase the originality by 100%.

The most popular and reliable online service that will help:

Of course, you can find a bunch of other services that increase originality in a search engine, but this one, time-tested and user-tested, you can check your work on it and immediately send it to increase uniqueness, if necessary. Often, scammers make easy money from naive people. Don't fall for the tricks.

These sites provide the opportunity to increase the uniqueness of text online for free, but only for the first trial. Typically the first use is limited to 2000 characters. Afterwards you will have to pay money. Approximate price – 150 rubles. per document. In addition, large sites fulfill orders quite quickly, in a day at most. This can be convenient when deadlines are pressing.

Pros and cons of this method:

+ High originality;

+ Speed ​​of work;

- Not for free;

- It is possible to stumble upon scammers.

Self-increasing originality

Typically, teachers want you to improve the originality of the text and revise several sources. This should help you learn the material, expand your knowledge, etc. Well, if you have free time, you can do it yourself. This way you will learn, save money, and maybe enjoy your work. The tips below will help you increase your originality.

Shingle Rule

Are you ready to receive a unique text in 30 minutes?

Continuing to consider questions about ways increasing the originality of the text, let’s focus on the second group of such methods, which we designated as “technical” (the first group – “honest” ways to increase the originality of the text is described here).

All technical ways to bypass the Anti-Plagiarism system can be divided into 2 groups. The first includes deception of the text checking system itself, and the second is deception of the script that transmits the text for verification.

Let's look at these methods in more detail.

1. 1. Probably the very first way to bypass the Anti-Plagiarism system is to replace Russian (Cyrillic) letters with other letters (Latin) that are similar in spelling. The most common letters for replacement were: a, o, m, p, k, x, i, s. The author in Word chose to replace characters throughout the document and received text that, although not readable in the normal sense, “looked” quite acceptable. An important feature was the need to disable spell checking in the entire document, since the text contained a lot of errors for a text editor. About 2 years after the start of the Anti-Plagiarism system, the developers corrected this feature. Although it is worth noting that some services for checking the uniqueness of text are still possible get around Thus.
2. 2. The second stage in the development of technical methods was the search and replacement of Russian letters with Greek and others similar in spelling. For example, the spelling of the letter “O” in the Cyrillic alphabet and “Omega” in the Greek alphabet are very similar. For some time this method also worked.
3. 3. In addition to replacing letters, methods related to the insertion of special characters invisible to the Anti-Plagiarism system, ranging from a space to various hieroglyphs in other number systems, were often used.
4. 4. After the main website for checking student work, Antiplagiat - www.Antiplagiat.ru, introduced a system for checking spelling and highlighting all words containing errors, as well as marking the entire document with a red exclamation mark, this method, in principle, ceased to be relevant. Although the presence of an exclamation mark does not indicate the use of technical methods to bypass anti-plagiarism, it only recommends that the teacher read the report in more detail, since in many scientific fields such a mark is possible. For example, these are foreign languages, computer science, mathematics, etc.
5. 5. The simplest and at the same time, the most accessible method that is currently used is the method adding original text to a document. And so that this text is not visible, it is hidden in the “Inscriptions”, taken out of the visibility of the screen, made white, and set the size to 1 point. Most services on the Internet operate this way. Of course, all teachers know about this method and try to identify text in the report that does not correspond to the content of the work. It is much more promising to insert into the work not just any text, but blocks from the same work that are original and it will be much more difficult for the teacher to see the catch.
6. 6. Another technical way bypass the Anti-plagiarism system is the substitution of the content of the text that is visible on the screen and is not sent correctly for verification. The simplest illustration of this method is inserting pictures instead of letters - everything is visible normally in Word, but when checking for originality, these letters (numbers) disappear. Replacing individual letters will not have any effect, since this will significantly worsen the spelling of the text. It makes sense to change entire words and bring them into a form that is not perceived by the Anti-Plagiarism service. For example, you can replace some character that is lost when checking for a word, and make changes to the document font itself so that it understands this character as a whole word. Identifying this method of technically increasing originality is not so difficult - you just need to copy the document into any text editor, preferably into a notepad, and see if the symbols, letters, words, etc. are missing. It is necessary to verify the identity of the text being checked and the text contained in the work, since this will still be visible in the extended report of the Anti-Plagiarism-VUZ system.

Of course, there are other technical methods increasing the originality of the text, but the best way is, of course, copyright, or, as a last resort, rewriting.