Today we will talk about how to make a quarry in Minecraft. Digging holes in the ground to find minerals often takes a long time. A quarry can greatly facilitate this task. Such a device will independently search for obsidian, and at this time we will be freed up for other matters.
Instructions
Now we will take a closer look at how to build a quarry in Minecraft. First of all, you should collect the necessary components. We will need: red dust, a diamond pickaxe, as well as different types of gears (two gold and diamond and 3 iron). After the appropriate arrangement of all components on the workbench, we create a quarry. You can start using it immediately. If you have the GregTech add-on, the recipe will be different. In this case, we replace the diamond pickaxe with a similar drill, and an improved electrical circuit will replace the red dust. Next, the process follows the instructions described above. We place all the elements on the workbench and get a quarry.
How does the design work?
We have figured out Minecraft, now we should discuss its main capabilities. The device digs up a selected area of land, thus gradually reaching bedrock or lava. The quarry can be started again. First, we process the resulting lava into obsidian. Once this is done, the device will go looking for minerals again. Before creating a quarry, we will take care of energy, because the device will need it. The device requires power ranging from 9 to 48 MJ/cycle. The device must be powered by an engine. The speed of direct work depends on the number and type of such elements.
Components
To solve the question of how to make a quarry in Minecraft, among other things, you need a diamond pickaxe. This is an extremely important tool in this virtual reality. Moreover, its diamond version is recognized as the best. First of all, we extract wood by hand. To do this, we split the tree. The resulting elements allow you to create boards. We use up to 10 blocks of wood, this will be enough. After this, we horizontally assemble a pair of boards on the workbench and get sticks. This element is useful for any type of pickaxe. The diamond version we need is created from sticks and three matching gems. We also need red dust to achieve success. We will get 4-5 units of this element by destroying a block of the corresponding ore. Now we know how to make a quarry in Minecraft and what is needed for this.
There are often cases when a crafter has a desire to dig a huge pit in Minecraft, a kind of quarry. Trying to do this manually can only be done by someone who doesn’t mind the time, because removing a huge layer of material is very labor-intensive. The BuildCraft mod and the mechanism it adds, which is also called a “quarry,” can come to the rescue.
How to make a quarry in Minecraft
To make the mechanism, you will need gold, iron and diamond gears, a diamond pickaxe and red dust. All this stuff should be located the same way as in the screenshot.
If you use the GregTech add-on for Minecraft, the recipe will be slightly different. The gears remain in place, and a diamond drill bit and an improved electrical circuit take the place of the remaining components.
The result will be a device capable of digging a default area of 9x9, or, if you use special tags, a zone defined by the crafter, up to 64x64. The mechanism will go deeper until it reaches bedrock or lava.
BuildCraft is a high-tech mod that imitates reality, so the quarry will not work in Minecraft without energy. The minimum consumed by it is 2 MJ/cycle, the maximum is 48 MJ. The minimum required for continuous digging is 9 MJ/cycle. Operating at maximum ensures that the device moves a distance of 5.2 blocks per clock cycle. Any engine can power the mechanism. The speed depends on the number and type of motors. You can use, for example, a steam engine from the RailCraft modification. It is capable of delivering 8 MJ. In general, which energy generator to connect is at your discretion.
How to dig a quarry in Minecraft
Having dealt with the “shovel”, you can start digging. It is best to use the already mentioned tags in Minecraft. You can make them using a red torch and ultramarine.
Having everything you need, repeat after us.
- Place a pole that will serve as a mounting location for one of the tags. After that, attach one marker to the post and place one next to it.
- Next, use the remaining marks to mark the outline of the Minecraft quarry to create a rectangle.
- Right-click on the mark at the base of the pillar. The outline will immediately highlight in red.
- We have reached the point where the quarry itself is required. Place it near the foundation mark. As a result, all markers will fall out, and the outline in Minecraft will turn yellow and black.
- Connect the motor to the mechanism and install the lever.
- By turning on the quarry, a device will appear above the outline that will build an orange frame.
- As a result, after the construction of the frame is completed, a drill will appear, which will dig a pit in Minecraft.
We talked about a quick way to build this wonderful device. There are options that require so-called BuildCraft pipes, but this is a little more difficult to do. Perhaps more complicated options have advantages in speed, but construction takes more time. If you wish, you can later build such a quarry in Minecraft.
It takes a Minecraft player a lot of time to dig holes in the ground in search of the necessary minerals. But you can make your work easier by thinking about how to make a quarry in Minecraft. This device will find precious obsidian without the help of others, and the player will be able to do more useful things.
How to make a quarry in Minecraft
Like any item in the game, crafting a quarry will require certain components. If you don't have them, you'll have to set off to get them. So, if you do not have the GregTech add-on installed, then to craft a quarry you will need the following items:
- reddish dust;
- 2 golden gears;
- 3 steel gears;
- Diamond pickaxe;
- 2 diamond gears.
You need to place the above components on the workbench, and in a few seconds you will get a quarry. You can start using it immediately.
If you installed the GregTech add-on, the recipe will be slightly different. The reddish dust needs to be replaced with an improved electrical circuit, and the diamond pickaxe with a diamond drill. After all the components are laid out on the crafting bench, you will receive a quarry.
How does the quarry work?
A quarry digs up a piece of land and evenly reaches the lava or bedrock. Once you turn the lava into obsidian, you can start the device again. It will again go in search of the necessary minerals, destroying one block after another.
Before you make a quarry in Minecraft, it is important to take care of the energy that it will need for work. He will need a little power of Nine MJ per cycle, a lot - 40 eight MJ per cycle. It is also necessary to know that the quarry must be fueled by an engine; The speed of the device depends on the type and number of engines.
Hello. Today I will talk about an interesting addition to the game. More precisely, I will tell you how to make a quarry in minecraft.
Craft and Application
In order to start the craft itself, we will need to download the Industrial Craft 2 mod. It is in it that we will find the quarry itself.
It looks like a regular block. Crafting it is quite expensive. I won’t talk in detail about crafting, because we have it on our forum. I'll only tell you what we need. The following items will be present in crafting: gears (we will need a lot of them), diamond pickaxe, redstone (red dust).
After creation, we can run to the place where the quarry itself will be installed. It works like this: We set up the territory that will be dug. After this, we turn on our device. He begins to drill a mine in the area you have chosen. Anything it drips will go into your chest.
If you have any other questions, I advise you to visit our portal. Here you can find a bunch of articles on different topics. You can also ask a question and our editors will be happy to answer it.
Also, don’t forget to come to our store, because there are a lot of products at very low prices!
Knowing how to extract oil and make fuel, use pipes and engines, and mark out territory, you can begin to use the most powerful machines in Buildcraft. Today we will engage in resource extraction, namely, we will talk about a drilling rig and a quarry.
Let's start with the drilling rig. This machine is not as expensive or useful compared to the quarry, but perhaps you will find a use for it. The recipe for the drilling rig was in previous articles, but I will still repeat it.
The machine must be placed on the ground and supplied with energy. It is also advisable to attach a pipe or chest, otherwise the dug up resources will fly to the ground. The drilling rig digs a vertical tunnel one block wide to the very bottom of the map. At the same time, some semblance of a pipe is lowered. See the picture below for what it looks like. If you need to make a vertical tunnel, use it. 
Career
The quarry in Buildcraft is the calling card of the mod, along with the pipes. It allows you to dig up resources in huge quantities in a relatively short time, freeing you from this tedious task. You can see the quarry recipe in the picture below. 
Crafting is quite expensive, it uses 11 diamonds, but they will quickly pay for themselves. Before installing the quarry, you can mark the area with blue markers, as described in the previous article. If you do not do this, the machine will use its standard contour for excavation. I marked out a small rectangle for the quarry, and this is what came out of it. 
For power you will need at least 2 internal combustion engines. The quarry will work with a small amount of energy, but it will be very slow. It is also worth connecting a pipe and attaching several chests to it. When you start supplying energy, a small flying square robot will appear, which will laser clear the area inside the circuit of foreign blocks and begin to build an orange fence. 
Having built it, the robot will disappear and the quarry will begin to dig. It is worth remembering that if the quarry finds lava, it will stop, although it digs perfectly in water. You can fill the hole with water, then the lava will turn into obsidian, which will be dug out. Once the quarry reaches bedrock, it will stop. Be careful, the hole will be very deep, don't fall. Well, or you can push your friends there. 
Conclusion
The quarry is, of course, much more powerful than the drilling rig, but it is used in other recipes. In addition, it costs much less and will help you make vertical tunnels. Well, the quarry will allow you to quickly extract resources. You can place it underground, for example right above the diamond level, so you don't have to wait for it to dig up all the stone. Then production will be even faster. Next time, we'll talk about terraforming. You will learn how to use the placeholder and what patterns it uses.
