Setting up graphics in WOT. Ways to increase FPS in World of Tanks (WoT) Why 0 FPS in wot what to do

Let's consider a pressing issue for many gamers - optimizing the world of tanks and increasing FPS for weak computers.
Many people know that World of tanks uses only part of the power of your computer. Almost everything depends on the power of the processor. But what should owners of weak computers and laptops do? That's right, optimize the game using mods and programs. In this article we will look at the operation of all mods and programs and install them. If you have a weak computer, then thanks to these instructions you can significantly increase the number of frames per second (FPS) and will be quite comfortable playing. Optimization consists of several stages.

To start install wot tweaker. This is a very useful program for disabling unnecessary effects. To install the program, move it to the game folder. Then run the WOT RES UNPACK file.

After it finishes its work, run the WOT TWEAKER file.

This program is the most important part of optimizing the WOT client. These textures are the hardest to count. We recommend turning off all effects except the movement of trees and cloud reflections, because they do not greatly affect FPS and do not provide any extra load.

It's time to install compressed textures, which are ideal for players who do not have powerful video cards. Compressed textures will make the game less beautiful, but you need to understand that beauty requires sacrifice. In our case, this is a sacrifice in the form of good graphics. We recommend installing the 25 percent version. It has the best ratio of quality reduction and FPS increase. Installation may take some time, sometimes quite long.
After the textures we will install mod that removes fog. As a result of this mod, the fog in the game will disappear and, when aiming at long distances, you will see the enemy more clearly. And when you switch to sniper mode, the freezes that most players complain about will disappear.
The next step is to install minimalistic version of the hangar, which was made for only one purpose - to maximize the optimization of the game. It's not very pretty, but it's very optimized.
Let's move on to the settings of the game itself. We leave only the visibility range at maximum. We set the remaining parameters to a minimum or turn them off altogether.

After all these steps, it is recommended to defragment the hard drive.

Many people are interested in how to increase fps in World of Tanks. Performance directly depends on this parameter, because even the most skilled player will hardly be able to accurately shoot at jumping and disappearing enemies. In this article you will see a personal example of increasing FPS in World of Tanks on an average non-gaming laptop.

What is FPS in tanks

Before directly considering the question of how to increase FPS in World of Tanks, let’s look at what this indicator is responsible for and what factors influence it.

FPS is the number of frames reproduced by the system per second. The optimal indicator is kept at 60-80 frames. You can play comfortably at 40 fps, but at lower rates lags and freezes begin. Let's look at exactly what factors influence productivity.

• Hardware power. RAM and video card are especially important.
• System load. Number of simultaneously open programs.
• In-game settings. The way the game itself is set up.

Now that we “know the enemy by sight,” let’s look at how to increase FPS in World of Tanks.

How to set up your computer

Step one. Disable all unnecessary programs

The first step is to clear the RAM. To do this, just close all active tabs. Usually this is a browser and Skype, you can disable the antivirus, playing tanks it is impossible to pick up malware, but it will free up a lot of memory.

You can also disable background processes in Task Manager. It is called by simultaneously pressing the ctrl+alt+delete keys. In it you can close everything that does not have a Windows mark next to it.

Step two. Update video card drivers.

One of the reasons for low FPS in World of Tanks is outdated software. You can update drivers directly through Windows; this is done in two steps:

1. Launch Device Manager and select "Video Adapters"

1. Open the action menu by right-clicking on the video card. Click "Update Drivers".

The system itself will find the necessary data on the Internet.

Step three. In-game settings.

Increasing FPS in World of Tanks is also available in the game client. The fact is that the game does not quite correctly assess the capabilities of the system, which is why performance drops significantly. Here's a good example:

This is the graphics the system recommends to me.

First you need to change the screen resolution. The main thing is to maintain the aspect ratio (in my case 16:9)

Then you need to go to advanced settings and change a number of settings.

The render resolution cannot be changed. The picture quality deteriorates to an almost unplayable state.

Let's check how much working with the settings helped.

It can be seen that, although the quality of the graphics has dropped, the method for increasing FPS in WoT works with a bang.

Even on the weakest computers, this method will significantly increase the number of frames per second. True, there are also extreme ways to improve performance.

Programs and mods to increase FPS

Game optimization software started coming out in early versions. At first, individual small improvements were released. For example . After noticing the demand for such a function, programmers united into one team and announced WoT Tweaker. WoT Tweaker is a program for increasing FPS in World of Tanks. It allows you to comprehensively disable visual effects. You can download () for free and without registration on our website. There is also a universal program Leatrix Latency Fix.

An alternative way is to install a modpack with optimized tank textures. The modpack is called . The fact that it is dedicated to an anime series does not matter, but what is important is that the author of the modpack reworked wargaming textures and optimized them. There are a lot of modpacks, but the game can be run even on video cards with 128 MB of RAM. Try it!

How to increase fps in World of Tanks using WoT Tweaker

1. from our website.
2. Launch the mod and disable the effects. Multi-core processing is marked in red. A feature that has not yet been fully developed. It provides increased performance, but is not always stable.

Do you know alternative ways to increase FPS in WoT? Did you find a solution to the problem on the site? Leave your reviews and share your impressions in the comments.

This issue worries many players and they are all looking for a solution to this problem. There are several ways to increase FPS and now we will study them.

A large load from the game falls on the video card and in order to optimize the load as much as possible. You can install several programs that will significantly help increase FPS.

First, install a very good wot tweaker program. This program disables all unnecessary special effects.

Once you install the program, you can disable the following special effects:

• smoke from the exhaust pipe
• smoke from destroyed tanks
• smoke and flames when fired
• projectile explosion effects
• effect of hitting a tank
• tank destruction effect
• effect of hitting objects
• object destruction effects
• tree movement effect
• cloud display

This program is the most important in optimizing the game client.

The game may lose a little beauty, but you don't have to choose.

Installing compressed textures can take anywhere from a few minutes to a few hours, but it's worth it.

After that, we’ll also install a mod that removes the fog. After installing this mod, the fog will disappear from the maps, which will increase visibility over long distances and there will be no stutters in sniper mode.

Another important step will be installation.

These hangars are not very beautiful, but the hangar loads faster.

We will also make settings in the game itself.

In the settings, we’ll leave only the maximum visibility range at maximum, and set everything else to minimum.

Millions play, and their numbers increase every year. Not everyone has a powerful computer for comfortable gaming at maximum graphics settings. What to do? How to increase FPS in World of Tanks? There is a solution.

If low FPS on a weak PC or laptop forces you to play with wild lags, then this article is for you. Our detailed instructions will help you remove lags and increase FPS in tanks to optimal values. But first, the materiel.

What is FPS

FPS is an English abbreviation that stands for Frames Per Second. It means number of frames per second. The more, the smoother and more realistic the picture on the screen looks. Modern computers are capable of delivering hundreds and thousands of FPS even at maximum settings. But owners of older PC models are doomed to constantly struggle with lags.

What does FPS WOT depend on?

The performance of games, including World of Tanks, directly depends on the power of the computer. Each part is responsible for performing its own range of tasks. To understand how to increase FPS in World of Tanks, it is worth finding out what resources the system lacks for normal operation.

RAM (random access memory)

RAM stores data from all running programs, including the operating system itself. Its volume indicates how much information the device can work with simultaneously. For example, a weak laptop usually has 2 GB of RAM. Part is reserved for system needs, so in reality only 1.7 GB is available. At the same time, about 1 GB is taken away by Windows 10 processes. 700 MB remains. To play World of Tanks with a normal framerate on minimum settings, you need at least 2 GB free random access memory. This is due to the fact that the game has huge maps and a lot of 3D objects, the data about which needs to be stored somewhere.

CPU (processor)

The processor is responsible for processing information right now, in real time. It transports data between RAM and the motherboard, the main part of the computer. How quickly he does this is called processor frequency and is measured in Gigahertz (GHz or GHz). For example, the Inter Core i5 processor has 4 cores, each with a frequency of 3.2 GHz. This is enough for a comfortable game in WOT with 30-60 FPS.

The problem of a weak processor is most relevant when dynamics begin on the screen: shots, explosions, destruction of objects, fast movement, and the like. At such moments, you can notice a serious drop in FPS due to the inability of a weak CPU to cope with a colossal amount of data overnight. The minimum processor parameters with which World of Tanks can be launched are: 2 cores 2 GHz each .

GPU (video card)

The video card is responsible for everything related to graphics: 3D rendering of the scene (maps), detailing of game models, a particle system (effects of explosions and shots), drawing water and shadows, lighting, drawing vegetation (in particular trees, bushes and their foliage), transparency of objects, etc. The video card has its own GPU , cooler (fan for cooling) and video memory . It works the same way as a CPU with RAM: the processor transfers data between video memory and the motherboard, and the cooler monitors the temperature so that the GPU does not burn out from overheating.

The greatest load on the video card is created by:

• Shadows, especially dynamic (moving) ones
• mirror surfaces,
• Glare and lighting effects,
• High resolution textures,
• Shaders (grass movement, water physics, footprints in the sand, etc.),
• Vertical sync and triple buffering (stabilizes but reduces frame rate).

By disabling all this in the settings, you can force the PC to produce 30-50 FPS more, unless, of course, the problem is with the video card. The minimum amount of video memory for playing WOT is 512 MB.

Important! When choosing a video card for WOT, you should give preference to Nvidia models. For the most part, they are more productive than AMD products, as well as more flexible in configuration and more affordable.

What FPS should be in WOT

Normal FPS in WOT is 30 and above. At this number of frames per second, you can play quite normally. With a high FPS (60-120 or more), tank battles become especially enjoyable, but such pleasure is not available to everyone. If FPS drops below 30, you should prepare for periodic freezes, freezes, picture jerks and other annoying consequences. Sound familiar?

Why FPS sags in World of Tanks

First of all, FPS depends on the power of the device, on which the game is running. We have already found out that it is influenced by:

• Number of processor cores and their frequency,
• The amount of RAM and the speed of working with it,
• Amount of video memory and video card speed,
• Hard drive speed and amount of occupied space,
• Temperature of components
• General state of the system,
• Much more.

Based on this, the first thing you need to do is check whether your PC meets the World of Tanks system requirements.

Minimum (~30 FPS)

• Processor: 2 cores x 2 GHz or better
• RAM: 1.5 GB
• Video card: 256 MB
• Free disk space: ~25 GB

• Processor: 4 cores at 3 GHz
• RAM: from 4 GB
• Video card: 2 GB or higher
• Free disk space: ~36 GB

If a computer or laptop is so weak that it doesn’t even reach the minimum settings, then it’s unlikely that you’ll be able to squeeze more than 10-20 FPS out of it. It’s better not to force your calculator and pay attention to others, including. Are the minimum requirements met, but FPS is bottom? Go ahead.

Setting up World of Tanks to increase FPS

First of all, if FPS is low, you need to lower the graphics settings in the game itself. The lion's share of system resources is taken away by unnecessary special effects, shadows, ultra-realistic textures, etc. If you are here, then all this is clearly not for your bucket. Feel free to turn it off!

Open the World of Tanks settings window.

• Enable full screen mode. In windowed mode in WOT, FPS often fluctuates.
• Reduce screen resolution. The smaller it is, the easier it will be for the computer to output information. A resolution of 1366x768 is quite enough for comfortable gaming, but this is not the limit.
• Turn off shadows. Shadows put a lot of load on the video card. If you have a weak PC, you will get almost a 2x performance boost simply by disabling them.
• Disable Vsync. Vertical synchronization makes the picture smooth, eliminating stutters and stutters, but reduces FPS. Disable it and get +5-10 fps.
• Disable triple buffering. This option only makes sense when Vsync is enabled. Make sure it is disabled in the game settings.
• Disable antialiasing. Anti-aliasing improves the visual component of World of Tanks, but greatly reduces FPS on weak devices.
• Disable all special effects. Get rid of all particle effects (steam, smoke, fire, etc.) that can affect FPS.
• Reduce landscape and vegetation quality. All this is a waste of system resources, which is only acceptable on powerful PCs.
• Disable grass in sniper mode. It affects not only FPS, but also gameplay, from time to time creating interference when shooting.
• Lower graphics settings to minimum. Set texture resolution to minimum. This will reduce the load on the video card.
• Lower the resolution of your 3D render. The parameter affects the depth of the 3D scene and changes the resolution of its objects. The smaller it is, the greater the performance increase you will get.
• Reduce draw distance. The smaller the visibility area, the faster the computer will process data, which means the FPS will be significantly higher.

Disable everything you can and check the framerate. Of course, after performing all these steps, the picture on the screen will be the same... But what can you do? This is the price for performance. Go ahead.

How to increase FPS in World of Tanks: setting up and cleaning your computer

A small increase in performance in World of Tanks can be obtained by optimizing your computer. Let's see what can be done to slightly increase or stabilize the FPS.

Clean your PC from junk files

This is a basic measure that should be done regularly, whether you play games or not. A special utility will help you with this CCleaner, which can be downloaded for free on the official website here.

1. Launch CCleaner
2. Go to the "Cleaning" section
3. Click the "Analyze" button and wait for the scan to complete
4. Click "Clean" to remove junk files

Registry fix

The registry stores data that allows the system to operate applications correctly. Errors in the registry almost always lead to loss of performance. The same CCleaner program will help you eliminate them.

1. Launch CCleaner
2. Go to the "Registry" section
3. Click "Scan for Problems" and wait for the scan to complete
4. Click "Correct Selected..."
5. In the window that appears, indicate whether you need a backup copy
6. In the next window, click “Correct marked”

Transferring the game from drive C:/

If your World of Tanks is installed on the local drive C:/ (on the same virtual drive as the PC operating system), move it to a file-based virtual drive (for example, D:/ or E:/). Try not to install anything unnecessary or bulky on the C:/ drive, as this will cause your computer to run slower than usual.

1. Uninstall World of Tanks
2. Reinstall World of Tanks on another local drive

Just moving the game folder won't work. This will cause registry errors and performance will become even worse.

Defragment your hard drive

If the hard drive is not taken care of for a long time and many different games and programs are installed, the files of one application may end up scattered across different sectors of the hard drive, which makes it more difficult for the computer to process them. Defragmentation moves this data closer together. Hence the increase in productivity.

1. Open My Computer
2. Right-click on the local disk with the game
3. Go to the “Service” tab
4. In the “Optimization and Defragmentation” subsection, select “Optimize”
5. Select the desired local drive from the list and click “Analyze”
6. Wait for the analysis to complete and click "Optimize" if necessary

The instructions are relevant for Windows 10. For other operating systems, the procedure may differ.

Update your video card drivers

You can find and download the latest drivers on the official website of your video card manufacturer - AMD or Nvidia. Newer versions of drivers optimize the performance of the video accelerator. The FPS will be a little higher and the graphics will be a little better.

Disable all unnecessary background programs

Close all unnecessary programs: Skype, Telegram, web browsers, Steam, etc. If you have Windows 10, in the task manager, go to the “Startup” tab and disable there all unnecessary applications that start with the OS.

Increase process priority

In the list of processes in the task manager, find World of Tanks, right-click and set the priority to “High”. From this moment on, the system will give the game as many available resources as possible, sacrificing the performance of other running programs (for example, Explorer).

Turn off Windows visual effects

If things are really bad, do the following.

1. Right-click on the “My Computer” icon and select “Properties”.
2. In the window that opens, click “Advanced system settings”
3. In the window that appears, go to the “Advanced” tab
4. In the “Performance” subsection, click the “Options” button
5. Next, select “Get the best performance” and save your changes.

Now your Windows will run a little faster, but look a little worse, and window animations will disappear altogether.

What else can you do

1. Remove all unnecessary programs and files. The less data on the disk, the faster it works.
2. Install WOT on SSD. When you launch the game from an external hard drive, it will run much faster, which will result in an increase in FPS.
3. Hardware overclocking of components. The processor, RAM and video card can be overclocked. The hardware performance will improve, but the amount of heat generated will also increase. This should be done by a person who clearly understands all the risks and has practical experience.

Programs and mods

FPS in WOT can also be increased using special programs and game modifications. Below is the most popular software on this topic.

1. CCleaner. We have already met with this utility above. The program can clean your PC of junk, fix registry errors and remove unnecessary applications.
2. Razer Cortex (updated Razer Game Booster). The program was created specifically for gamers. When running games, Razer Cortex will free up the maximum amount of system resources for them. Performance increase on weak PCs – from +10 to +30 FPS. The program can also take screenshots, record videos, stream, defragment and much more. More details on the developer's website.
3. WOT Tweaker. This small program is designed specifically for World of Tanks. With its help, you can change the game beyond recognition by turning off all unnecessary special effects - clouds, explosions, smoke, fire, etc. The increase in FPS on weak PCs will be noticeable. More details on the developer forum.

In addition to programs, there are mods with compressed textures World of Tanks. This allows you to reduce the load on the video card and improve performance.

What to do if nothing helps

I was once in your shoes, trying to play WOT on a dual-core laptop. I didn’t succeed, but I wasn’t particularly upset - there are still a lot of different tank games on the Internet. So, if you were unable to increase your FPS in World of Tanks, I suggest the following options.

1. Try playing. At minimum settings there is significantly less lag. In addition, the game offers atypical mechanics and a variety of military equipment, including aircraft and ships. Read more in our review.
3. Rating: 4.8 /5 - 12 votes

Let's consider a pressing issue for many gamers - optimizing the world of tanks and increasing FPS for weak computers.
Many people know that World of tanks uses only part of the power of your computer. Almost everything depends on the power of the processor. But what should owners of weak computers and laptops do? That's right, optimize the game using mods and programs. In this article we will look at the operation of all mods and programs and install them. If you have a weak computer, then thanks to these instructions you can significantly increase the number of frames per second (FPS) and will be quite comfortable playing. Optimization consists of several stages.

To start install. This is a very useful program for disabling unnecessary effects. To install the program, move it to the game folder. Then run the WOT RES UNPACK file.

After it finishes its work, run the .

This program is the most important part of optimizing the WOT client. These textures are the hardest to count. We recommend turning off all effects except the movement of trees and cloud reflections, because they do not greatly affect FPS and do not provide any extra load.

It's time to install compressed textures, which are ideal for players who do not have powerful video cards. will make the game less beautiful, but you need to understand that beauty requires sacrifice. In our case, this is a sacrifice in the form of good graphics. We recommend installing the 25 percent version. It has the best ratio of quality reduction and FPS increase. Installation may take some time, sometimes quite long.
After the textures we will install mod that. As a result of this mod, the fog in the game will disappear and, when aiming at long distances, you will see the enemy more clearly. And when you switch to sniper mode, the freezes that most players complain about will disappear.
The next step is installation, which is done with only one purpose - to maximize the optimization of the game. It's not very pretty, but it's very optimized.
Let's move on to the settings of the game itself. We leave only the visibility range at maximum. We set the remaining parameters to a minimum or turn them off altogether.

After all these steps, it is recommended to defragment the hard drive.